sslug-teknik team mailing list archive

[Jens Bang <mailinglists@xxxxxxx>]

On Wednesday 16 March 2005 07:03, Jesper Krogh wrote:
> Hvis cdrecord virker med:
> cdrecord -v driveropts=burnproof dev=/dev/hdc file.iso
> Så kører du uden scsi-emulering.. (korrekt under kerne 2.6)

Det virkede ikke. Men det ser ud til at være den samme fejl, som jeg har fået 
tidligere (se cdrecord-beskederne nederst i denne mail). Hvis det /er/ fordi 
jeg kører med SCSI-emulering, hvordan skifter jeg så over til at køre uden?

> Virker brænderen under <indsæt konkurrerende kommercielt operativsystem
> her>?

Den har virket under W2K, og hvis det skal være fordi drevet er dødt, så synes 
jeg det er påfaldende at dødstidspunktet falder præcis sammen med at jeg 
installerede Linux. Lige nu har jeg intet CD-brænder-program installeret 
under den MEGET minimale W2K jeg har installeret. Den eneste grund til at der 
stadig er Windoze på min maskine, er at jeg først for et par dage siden fik 
min netbank til at virke under Linux.

> Jeg er ved at være så lagt at mit bedste gæt er at drevet er kaput.

Det tror jeg ikke det er.


[root@localhost cdimages]# cdrecord -v driveropts=burnproof dev=/dev/hdc 
datatestcd.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent 
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg 
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to 
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this 
version.
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - 
Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c      1.83 04/05/20 
Copyright 1997 J. Schilling').
Driveropts: 'burnproof'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'PLEXTOR '
Identifikation : 'CD-R   PX-W4012A'
Revision       : '1.01'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE VARIREC FORCESPEED SINGLESESSION 
HIDECDR
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 2394336 = 2338 KB
Drive DMA Speed: 28929 kB/s 164x CD 20x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data   629 MB
Total size:      722 MB (71:36.22) = 322217 sectors
Lout start:      723 MB (71:38/17) = 322217 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359848 (79:59/73)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Single session is OFF.
Hide CDR is OFF.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 37631
Forcespeed is ON.
Turning forcespeed off
Power-Rec is ON.
Power-Rec write speed:     202x (recommended)
resid: 8
Speed set to 7056 KB/s
Starting to write CD/DVD at speed  40.0 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
cdrecord: Success. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 38.341s timeout 60s
cdrecord: OPC failed.
Writing  time:   38.349s
Last selected write speed: 40x
Max media write speed:     40x
Last actual write speed:   0x
resid: 4
BURN-Free was never needed.
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

-- 

        |\     _,,,---,,_       Greetings, Jens
 ZZZzz /,`.-'`'    -.  ;-;;,_
      |,4-  ) )-,_. ,\ (  `'-'  jens@xxxxxxx
     '---''(_/--'  `-'\_)
----------------------------------------------------
Sirs, I have tested your machine. It adds a new terror to life and makes death
a long-felt want.
                                   -- Sir Herbert Beerbohm Tree,
                                      describing the gramophone in 1956