torios-dev team mailing list archive

[Nio Wiklund <nio.wiklund@xxxxxxxxx>]

Den 2018-03-15 kl. 20:54, skrev Nio Wiklund:
> Den 2018-03-15 kl. 14:16, skrev Israel:
> > On 03/15/2018 05:10 AM, Nio Wiklund wrote:
> > > Hi again,
> > >
> > > I found the following information about the i686 kernel at
> > >
> > > https://packages.debian.org/stretch/linux-image-4.9.0-6-686
> > >
> > > The Linux kernel 4.9 and modules for use on PCs with one or more
> > > processors not supporting PAE.
> > >
> > > What about this link?
> > >
> > > https://packages.debian.org/stretch/linux-image-4.9.0-6-686-pae
> > >
> > > The Linux kernel 4.9 and modules for use on PCs with one or more
> > > processors supporting PAE.
> > >
> > > Best regards
> > > Nio
> >
> > Hey Nio,
> >
> > As it turns out, the code used in Jessie does precisely this :D
> >
> > And, as it were, I already had this code working for stretch.  I
> > disabled it, however, because I thought that the 686 kernel defaulted to
> > PAE.
> >
> > So, I made a bug unintentionally, because I misunderstood Stretch.  This
> > is great news!  This means Stretch will support the computers we want 
> > YAY!!!
> >
> > So, I am currently rebuilding OBI for Stretch and sometime soon you can:
> >
> > sudo apt update && sudo apt install obi-installer
> >
> > And try it out.  I think I fixed all the issues you mentioned in a
> > decent way.  Mostly I just offer to start the Graphical environment for
> > the user and restart the install process, or they can exit.
> >
> > Since it is for advanced users they should be able to figure the rest 
> > out.
> >
> > If you get a chance to check it out it will be this version:
> >
> > obi-installer - 3.4.0ubuntu0-345~ubuntu18.04.1
> >
> > Thanks for catching this issue!!
>
> Hi Israel,
>
> 1. Graphical Installer
>
> I could install with the PAE kernel using the graphical installer :-) (I 
> tested at the advanced OBI level). And the installed system can use all 
> the RAM :-)
>
> 2. Text installer
>
> But I could not install at all using the text installer (in text mode). 
> Some bug was introduced, because it worked in the previous version :-(
>
> There was a complaint that the chroot could not be started, and later on 
> there were some errors, I guess because of that.
>
> The installer could continue (but maybe the result would be bad, but at 
> the time zone I could not get the Swedish time zone accepted. The 
> .profile file 'could not be found'.
>
> Best regards
> Nio

Hi again Israel,

Sorry for the confusion.

1. When I reported, that it worked to install using the graphical 
installer, it was an updated and upgraded system from the previous iso 
file with md5sum:

efa3eba6bf82fdadfa340fcfb19e1e2b  ToriOS-2018-03-13-beta-stretch-i386.iso

2. while the current iso file fails also with the graphical installer 
(tested at the advanced OBI level in both cases).

95e885db3b976cb1578d32d940674233  ToriOS-2018-03-15-beta-stretch-i386.iso

I tried both without and with update & upgrade to the current 
obi-installer - 3.4.0ubuntu0-345~ubuntu18.04.1.

I get complaints about failing chroot and am kicked back to an earlier 
menu of the installer after the second complaint about chroot (when 
trying to install the bootloader).

Maybe something happened to the packages in the meantime?

See the attached log files

I tried also at the basic OBI level (with the newest iso file and 
updated obi-installer). There were errors in the information in the 
zenity windows: for example, nothing displayed in the final warning 
window, which can be scary.

I continued anyway, because it was a test drive anyway. But I was kicked 
back to an earlier window of the installer.

Best regards
Nio

Start at: Thu Mar 15 20:33:01 UTC 2018
[starter] 
Tarball path: /tarballs
zmktbl to make the tarballs
OBI path: /usr/share/OBI
[starter] Had to find a tarball.. OBI found /tarballs/ToriOS-i386-stretch.tar.xz
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
[starter] starter chose: o
[setlevel] using: advanced
[starter] Had to find a tarball.. OBI found /tarballs/ToriOS-i386-stretch.tar.xz
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
[starter] starter chose: i
[obi] Found pid for Zenity in obi: 8363
[position_win] Found 0x01200002 for the window to position
[mkctl] obi_system=ToriOS-i386-stretch
tarball=/tarballs/ToriOS-i386-stretch.tar.xz
[obi] Selected Tarball: /tarballs/ToriOS-i386-stretch.tar.xz
selecting mkpxpy (with swap)
[mkctl] obi_system=ToriOS-i386-stretch
tarball=/tarballs/ToriOS-i386-stretch.tar.xz
[confirm-partition] /dev/sda5 was not mounted
[select-part2] after dialog or zenity: ans=sda6
[select-part2] rootpart=/dev/sda6 swappart=/dev/sda5
[select-part2] obi-root:/dev/sda6
obi-swap:/dev/sda5
[confirm-partition] /dev/sda6 was not mounted
[confirm-partition] /dev/sda5 was not mounted
[confirm-partition] g
[confirm-partition] Installing ToriOS-i386-stretch  /dev/sda6
with swap  /dev/sda5
[confirm-partition] mklub ToriOS-i386-stretch /tarballs/ToriOS-i386-stretch.tar.xz /dev/sda6 /dev/sda5
[mkpxpy] ToriOS-i386-stretch
/tarballs/ToriOS-i386-stretch.tar.xz

[mkp] Found pid for Zenity in mkp: 8363
[position_win] Found 0x01200002 for the window to position
[mkp] /tarballs/ToriOS-i386-stretch.tar.xz (the tarball) is expanded, syncing the drive
[mkp] chroot command: sync
[mkpxpy] [mkpxpy] blkid for /dev/sda5 = /dev/sda5: LABEL="obiswap" UUID="8afccbdf-71d0-4269-814e-0d4ad3621196" TYPE="swap" PARTUUID="c88bc6dc-05" (if exists)
[mkpxpy] Use existing swap partition /dev/sda5 - keep its UUID
[mkp] rootpart=/dev/sda6
[mkp] swappart=/dev/sda5
[mkp] NEW swap UUID=8afccbdf-71d0-4269-814e-0d4ad3621196
[mkp] rootpart=/dev/sda6
NEW root UUID=ade1474e-57ef-4df3-a35a-f2b6809cd0ad
[mkp] Made /mnt/etc/fstab# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
#                
# / was on /dev/sda6 during installation
UUID=ade1474e-57ef-4df3-a35a-f2b6809cd0ad /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=8afccbdf-71d0-4269-814e-0d4ad3621196 none            swap    sw              0       0
[mkp] chroot command: uname -a
[hw-progress] ACPI
[hw-progress] bluetooth
[hw-progress] bluetooth
[hw-progress] rtl8723ae
[hw-progress] rtl8723ae
[hw-progress] rtl8723ae
[hw-progress] r8169
[hw-progress] r8169
[hw-progress] r8169
[hw-progress] hardware-search ACPI bluetooth bluetooth rtl8723ae rtl8723ae rtl8723ae r8169 r8169 r8169
[hw-progress] mount -t proc proc /mnt/proc
[hw-progress] [WARNING FAILURE]mount -t sysfs sys /mnt/sys
[hw-progress] mount -o bind /dev /mnt/dev
[hw-progress] mount -o bind /dev/pts
[hw-progress] [WARNING FAILURE]cp /etc/hosts
[hw-progress] [WARNING FAILURE]cp /etc/resolv.conf
[hw-progress] Did not copy files correctly for the internet to work, however they may have been copied earlier
[hw-progress] ::[ERROR] hw-progress 1 Failed to start the CHROOT
[mkp] Installing Bootloader
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
[obi-functions] ltest0=overlay
ltest1=/sdb
livedrive=/sdb
tmpstr=Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
usbonly=false
[obi-functions] DON'T unmount: overlay for /tarballs/ToriOS-i386-stretch.tar.xz
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
[obi-functions] Window sizing
 Text length:68
Guessed Width=680 (if this is too small it will default to 500)
[obi-functions] NO quitting now!! :D
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
[obi-functions] ltest0=overlay
ltest1=/sdb
livedrive=/sdb
tmpstr=Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
usbonly=false
[obi-functions] DON'T unmount: overlay for /tarballs/ToriOS-i386-stretch.tar.xz
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G  Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu        Dev: /dev/sdb  Size: 8011MB
[obi-functions] Window sizing
 Text length:68
Guessed Width=680 (if this is too small it will default to 500)
[obi-functions] list_device_dialog():1
[grub-installer] Bootloader destination: /dev/sda
[grub-installer] chroot command: sync
[grub-installer] [WARNING FAILURE]mount -t proc proc /mnt/proc
[grub-installer] [WARNING FAILURE]mount -t sysfs sys /mnt/sys
[grub-installer] mount -o bind /dev /mnt/dev
[grub-installer] mount -o bind /dev/pts
[grub-installer] [WARNING FAILURE]cp /etc/hosts
[grub-installer] [WARNING FAILURE]cp /etc/resolv.conf
[grub-installer] Did not copy files correctly for the internet to work, however they may have been copied earlier
[grub-installer] Failed to start the CHROOT
[clearOBI] restart progress
[clearOBI] kill -9 8363
[clearOBI] kill -9 8362
[clearOBI] kill -9 7920
[clearOBI] kill -9 8360
[starter] Had to find a tarball.. OBI found /tarballs/ToriOS-i386-stretch.tar.xz
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
[mkp] removed HTML tags from /root/obi-installer.log
[mkp] found: devpts on /mnt/dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
udev on /mnt/dev/pts type devtmpfs (rw,nosuid,relatime,size=1360980k,nr_inodes=213623,mode=755)
udev on /mnt/dev/pts type devtmpfs (rw,nosuid,relatime,size=1360980k,nr_inodes=213623,mode=755)
[mkp] found: udev on /mnt/dev type devtmpfs (rw,nosuid,relatime,size=1360980k,nr_inodes=213623,mode=755)
udev on /mnt/dev type devtmpfs (rw,nosuid,relatime,size=1360980k,nr_inodes=213623,mode=755)
[mkp] ran: umount --force /mnt/dev
[mkp] found: proc on /mnt/proc type proc (rw,relatime)
[mkp] found: /dev/sda6 on /mnt type ext4 (rw,relatime,data=ordered)
udev on /mnt/dev type devtmpfs (rw,nosuid,relatime,size=1360980k,nr_inodes=213623,mode=755)
udev on /mnt/dev type devtmpfs (rw,nosuid,relatime,size=1360980k,nr_inodes=213623,mode=755)
[mkp] ran: umount --force /mnt
[mkp]   [clearOBI] ran: umount --force /mntCouldn't successfully unmount chroot
[mkp]   [clearOBI] ran: umount --force /mntCouldn't successfully unmount chrootCouldn't successfully unmount chroot
[starter] starter chose:

Attachment: obi-installer.log.old
Description: application/trash

Start at: Thu Mar 15 20:45:58 UTC 2018
[starter] 
Tarball path: /tarballs
zmktbl to make the tarballs
OBI path: /usr/share/OBI
[starter] Had to find a tarball.. OBI found /tarballs/ToriOS-i386-stretch.tar.xz
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
[starter] starter chose: i
[obi] Found pid for Zenity in obi: 5202
[position_win] Found 0x01200002 for the window to position
[mkctl] obi_system=ToriOS-i386-stretch
tarball=/tarballs/ToriOS-i386-stretch.tar.xz
[obi] Selected Tarball: /tarballs/ToriOS-i386-stretch.tar.xz
selecting mkp2p1 (with swap)
[mkctl] obi_system=ToriOS-i386-stretch
tarball=/tarballs/ToriOS-i386-stretch.tar.xz
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G   Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sdb  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdc  Size: 8011MB
[obi-functions] ltest0=overlay
ltest1=/sdc
livedrive=/sdc
tmpstr=Name: ata-KINGSTON_SUV400S37120G   Dev: /dev/sda  Size: 120GB
Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sdb  Size: 120GB
Name: usb-Kanguru_FlashBlu         Dev: /dev/sdc  Size: 8011MB
usbonly=false
[obi-functions] DON'T unmount: overlay for /tarballs/ToriOS-i386-stretch.tar.xz
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G   Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sdb  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdc  Size: 8011MB
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G   Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sdb  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdc  Size: 8011MB
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G   Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sdb  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdc  Size: 8011MB
[list_drives] DRIVE: Name: ata-KINGSTON_SUV400S37120G   Dev: /dev/sda  Size: 120GB
[list_drives] DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sdb  Size: 120GB
[list_drives] DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdc  Size: 8011MB
[obi-functions] Window sizing
 Text length:69
Guessed Width=690 (if this is too small it will default to 500)
[obi-functions] list_device_dialog():2
[obi-functions] Found device: /dev/sdb
[obi-functions] Running: dd if=/dev/zero bs=4096 count=256 of=/dev/sdb
[obi-functions] 
Installing: ToriOS-i386-stretch
Target Device: /dev/sdb ...

mklub ToriOS-i386-stretch /tarballs/ToriOS-i386-stretch.tar.xz /dev/sdb
[select-device] Starting makelub:

chroot directory=/mnt

tarball=/tarballs/ToriOS-i386-stretch.tar.xz

device=/dev/sdb

format things=true

use swap=false

root partition=/dev/sdb1

swap partition=/dev/sdb2

[select-device] ToriOS-i386-stretch
/tarballs/ToriOS-i386-stretch.tar.xz
/dev/sdb
RAM=4194304
Sectors=234441648
Sector Size=512
Diskms=15625000
Swapsize=4838 MibiBytes
[select-device] makelub running fdisk on /dev/sdb using:
o
n
p
1
2048

p
w
q

[clearOBI] restart progress
[clearOBI] kill -9 5202
[clearOBI] kill -9 5201
[clearOBI] kill -9 4747
[clearOBI] kill -9 5199
[starter] Had to find a tarball.. OBI found /tarballs/ToriOS-i386-stretch.tar.xz
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
OS to install: ToriOS-i386-stretch
Menu Title: OS to install: ToriOS-i386-stretch
[mkp] removed HTML tags from /root/obi-installer.log
[starter] starter chose: q