touch-packages team mailing list archive
-
touch-packages team
-
Mailing list archive
-
Message #05128
[Bug 1284767] Re: Unity fails to start with a 4K monitor attached
I do not remember when this changed, but at some point it started
working again. The problem now is getting occasional compiz lockups and
the driver reporting continuous page flip failed no space on device
errors.
So I cannot give you xrandr info with the monitor not working.
But here is the current uname and lspci
Linux 3.2.0-67-generic x86_64
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Dell Device [1028:058b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:058b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0c00c Data: 4169
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Device [1028:058b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee0300c Data: 4161
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Dell Device [1028:058b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0515000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4171
Kernel driver in use: mei
Kernel modules: mei
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:058b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d051a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Dell Device [1028:058b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at d0510000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4189
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d0400000-d04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Dell Device [1028:058b]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:058b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0519000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP+
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation QS77 Express Chipset LPC Controller [8086:1e56] (rev 04)
Subsystem: Dell Device [1028:058b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:058b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at 2088 [size=8]
Region 1: I/O ports at 209c [size=4]
Region 2: I/O ports at 2080 [size=8]
Region 3: I/O ports at 2098 [size=4]
Region 4: I/O ports at 2060 [size=32]
Region 5: Memory at d0518000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4159
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Dell Device [1028:058b]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at d0514000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel modules: i2c-i801
01:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4460]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4179
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <32us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP+ BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number c8-f7-33-ff-ff-98-85-af
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity in Ubuntu.
https://bugs.launchpad.net/bugs/1284767
Title:
Unity fails to start with a 4K monitor attached
Status in Unity:
New
Status in “unity” package in Ubuntu:
Incomplete
Bug description:
I am running Ubuntu 12.04 LTS on a Dell XPS 13. This is an Intel
i7-3537U integrated graphics setup.
When I boot and log in and THEN attach a 4K monitor via DisplayPort
everything works well.
But when I attach the monitor and then boot, after logging in, Unity
fails to start. It seems to be unable to allocate a OpenGL surface.
Why the difference between startup and hotplug?
[zlynx@slicer 11:29:36 (0) ~]
$ unity -v --debug
unity-panel-service: no process found
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libcore.so : No such file or directory
/usr/bin/compiz (core) - Debug: Could not stat() file /usr/lib/compiz/libcore.so : No such file or directory
[New Thread 0x7ffff3b77700 (LWP 5114)]
/usr/bin/compiz (core) - Debug: pending request:d
/usr/bin/compiz (core) - Debug: - event serial: 1286
/usr/bin/compiz (core) - Debug: - event window 0x3400090
/usr/bin/compiz (core) - Debug: - x: 0 y: 0 width: 0 height: 0 border: 0, sibling: 0x0
/usr/bin/compiz (core) - Debug: pending request:
/usr/bin/compiz (core) - Debug: - event serial: 1354
/usr/bin/compiz (core) - Debug: - event window 0x3400093
/usr/bin/compiz (core) - Debug: - x: 1920 y: 0 width: 2160 height: 3840 border: 0, sibling: 0x3400090
/usr/bin/compiz (core) - Debug: pending request:
/usr/bin/compiz (core) - Debug: - event serial: 1431
/usr/bin/compiz (core) - Debug: - event window 0x3400096
/usr/bin/compiz (core) - Debug: - x: 0 y: 0 width: 722 height: 457 border: 0, sibling: 0x3400093
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libccp.so : No such file or directory
Checking if settings need to be migrated ...no
Checking if internal files need to be migrated ...no
Backend : gconf
Integration : true
Profile : unity
Adding plugins
Initializing core options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libcomposite.so : No such file or directory
Initializing composite options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libopengl.so : No such file or directory
Initializing opengl options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libcompiztoolbox.so : No such file or directory
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libdecor.so : No such file or directory
Initializing decor options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libvpswitch.so : No such file or directory
Initializing vpswitch options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libsnap.so : No such file or directory
Initializing snap options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libmousepoll.so : No such file or directory
Initializing mousepoll options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libresize.so : No such file or directory
Initializing resize options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libplace.so : No such file or directory
Initializing place options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libmove.so : No such file or directory
Initializing move options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libwall.so : No such file or directory
Initializing wall options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libgrid.so : No such file or directory
Initializing grid options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libregex.so : No such file or directory
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libimgpng.so : No such file or directory
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libsession.so : No such file or directory
Initializing session options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libgnomecompat.so : No such file or directory
Initializing gnomecompat options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libanimation.so : No such file or directory
Initializing animation options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libfade.so : No such file or directory
Initializing fade options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libunitymtgrabhandles.so : No such file or directory
Initializing unitymtgrabhandles options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libworkarounds.so : No such file or directory
Initializing workarounds options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libscale.so : No such file or directory
Initializing scale options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libexpo.so : No such file or directory
/usr/bin/compiz (expo) - Warn: failed to bind image to texture
Initializing expo options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libezoom.so : No such file or directory
Initializing ezoom options...done
/usr/bin/compiz (core) - Debug: Could not stat() file /home/zlynx/.compiz-1/plugins/libunityshell.so : No such file or directory
[New Thread 0x7fffde046700 (LWP 5116)]
[New Thread 0x7fffdd845700 (LWP 5118)]
(compiz:5111): GConf-CRITICAL **: gconf_client_add_dir: assertion `gconf_valid_key (dirname, NULL)' failed
[New Thread 0x7fffd77bf700 (LWP 5119)]
Program received signal SIGBUS, Bus error.
0x00007fffeb6b245d in ?? () from /usr/lib/x86_64-linux-gnu/libdricore9.0.0.so.1
#0 0x00007fffeb6b245d in ?? () from /usr/lib/x86_64-linux-gnu/libdricore9.0.0.so.1
No symbol table info available.
#1 0x00007fffeb6b553c in ?? () from /usr/lib/x86_64-linux-gnu/libdricore9.0.0.so.1
No symbol table info available.
#2 0x00007fffeb6ba6e5 in ?? () from /usr/lib/x86_64-linux-gnu/libdricore9.0.0.so.1
No symbol table info available.
#3 0x00007fffeb6bbf10 in ?? () from /usr/lib/x86_64-linux-gnu/libdricore9.0.0.so.1
No symbol table info available.
#4 0x00007fffeb6bc0cd in _mesa_store_teximage () from /usr/lib/x86_64-linux-gnu/libdricore9.0.0.so.1
No symbol table info available.
#5 0x00007fffebb552c9 in ?? () from /usr/lib/x86_64-linux-gnu/dri/i965_dri.so
No symbol table info available.
#6 0x00007fffeb6a8704 in ?? () from /usr/lib/x86_64-linux-gnu/libdricore9.0.0.so.1
No symbol table info available.
#7 0x00007fffeb6a98f0 in _mesa_TexImage2D () from /usr/lib/x86_64-linux-gnu/libdricore9.0.0.so.1
No symbol table info available.
#8 0x00007fffe666244b in nux::IOpenGLSurface::InitializeLevel() () from /usr/lib/libnux-graphics-2.0.so.0
No symbol table info available.
#9 0x00007fffe66630f9 in nux::IOpenGLTexture2D::IOpenGLTexture2D(unsigned int, unsigned int, unsigned int, nux::BitmapFormat, bool, char const*, int) () from /usr/lib/libnux-graphics-2.0.so.0
No symbol table info available.
#10 0x00007fffe6649a0d in nux::GpuDevice::CreateTexture(unsigned int, unsigned int, unsigned int, nux::BitmapFormat, nux::IOpenGLTexture2D**, char const*, int) () from /usr/lib/libnux-graphics-2.0.so.0
No symbol table info available.
#11 0x00007fffe664a1a0 in nux::GpuDevice::CreateTexture(int, int, int, nux::BitmapFormat, char const*, int) () from /usr/lib/libnux-graphics-2.0.so.0
No symbol table info available.
#12 0x00007fffe6647ae0 in nux::GpuDevice::CreateSystemCapableDeviceTexture(int, int, int, nux::BitmapFormat, char const*, int) () from /usr/lib/libnux-graphics-2.0.so.0
No symbol table info available.
#13 0x00007fffe3f9cdfc in nux::WindowCompositor::FormatRenderTargets(int, int) () from /usr/lib/libnux-2.0.so.0
No symbol table info available.
#14 0x00007fffe3fa5555 in nux::WindowThread::ThreadCtor(_XDisplay*, unsigned long, __GLXcontextRec*) () from /usr/lib/libnux-2.0.so.0
No symbol table info available.
#15 0x00007fffe3f561c7 in nux::CreateFromForeignWindow(unsigned long, __GLXcontextRec*, void (*)(nux::NThread*, void*), void*) () from /usr/lib/libnux-2.0.so.0
No symbol table info available.
#16 0x00007fffe4405c6a in unity::UnityScreen::UnityScreen(CompScreen*) () from /usr/lib/compiz/libunityshell.so
No symbol table info available.
#17 0x00007fffe441a6b8 in PluginClassHandler<unity::UnityScreen, CompScreen, 0>::get(CompScreen*) () from /usr/lib/compiz/libunityshell.so
No symbol table info available.
#18 0x00007fffe441a85c in CompPlugin::VTableForScreenAndWindow<unity::UnityScreen, unity::UnityWindow>::initScreen(CompScreen*) () from /usr/lib/compiz/libunityshell.so
No symbol table info available.
#19 0x00007ffff7b95a1c in CompManager::initPlugin(CompPlugin*) () from /usr/lib/libcompiz_core.so.ABI-20120305
No symbol table info available.
#20 0x00007ffff7b96451 in CompPlugin::push(CompPlugin*) () from /usr/lib/libcompiz_core.so.ABI-20120305
No symbol table info available.
#21 0x00007ffff7b67b0d in compiz::private_screen::PluginManager::updatePlugins() () from /usr/lib/libcompiz_core.so.ABI-20120305
No symbol table info available.
#22 0x00007ffff7b68069 in PrivateScreen::processEvents() () from /usr/lib/libcompiz_core.so.ABI-20120305
No symbol table info available.
#23 0x00007ffff7b9b287 in CompEventSource::callback() () from /usr/lib/libcompiz_core.so.ABI-20120305
No symbol table info available.
#24 0x00007ffff609ff2f in Glib::Source::dispatch_vfunc(_GSource*, int (*)(void*), void*) () from /usr/lib/x86_64-linux-gnu/libglibmm-2.4.so.1
No symbol table info available.
#25 0x00007ffff5ba7d13 in g_main_context_dispatch () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#26 0x00007ffff5ba8060 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#27 0x00007ffff5ba845a in g_main_loop_run () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
No symbol table info available.
#28 0x000000000040242e in main ()
No symbol table info available.
To manage notifications about this bug go to:
https://bugs.launchpad.net/unity/+bug/1284767/+subscriptions
