ubuntu-hams team mailing list archive

[Petr Hlozek <petr@xxxxxxxxxx>]

Hi Lahra,

please try to run cqrlog in console with --debug=1 parameter. Program
will show the error in the console.

73 Petr, OK2CQR

2015-07-07 1:39 GMT+02:00 Lahra Svare - KT9X <kt9x@xxxxxxxx>:
> Well, I've tried different settings to get CQRLog to control my rig.  I do
> have rig control working with FLDigi, so I know my port and RadioID and and
> I'm IN the usergroup and such.  But so far, no go with CQRLog.  On the
> preferences page for TRX Control, I've specified HOST, RIGID, DEVICE
> (/dev/ttyUSB1), Poll Rate 500 and PORT 4532.  I've left serial parameters
> default, other than changing speed to 4800.  But I've also tried adding stop
> bits (2) and turning on RTS, which are the only settings I thought had a
> chance of making a difference with my rig.
>
> Everything else seems to be working fine:  clusters, log, eQsl and LOTW,
> etc.  I THINK that the only issue I have is connecting to my rig (An
> FT-1000MPMKV).  I do see on the FLDIGI tab, there are check boxes to RUN
> FLdigi, to get frequency from FLDigi or CQRLog etc. I've tried making them
> all FLDigi and then all CQRLog, but none of those settings seem to help me
> with connecting to the rig.
>
> I have spent about and hour and a half now browsing google, the CQRLog
> website and anything else that had any hints for rig control, but none of
> those ideas have made any difference.  What other information could I give
> that might help any of you help me connect CQRLog to my rig? I'm wondering
> if any of you have any further things for me to try.
>
> Thanks again!
>
> 73 de KT9X, Lahra
>
> _______________________________________________
> Mailing list: https://launchpad.net/~ubuntu-hams
> Post to     : ubuntu-hams@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~ubuntu-hams
> More help   : https://help.launchpad.net/ListHelp



-- 
http://HamQTH.com/ok2cqr
http://ok2cqr.com
http://cqrlog.com
http://cqrtest.com