ubuntu-x-swat team mailing list archive

[fontinalis <sfontinalis@xxxxxxxxx>]

Public bug reported:

Binary package hint: x11-xserver-utils

Hello,

I can't get Karmic to use my svideo outut to my tv. It worked fine in Intrepid. Here is my info:
Inspiron 600m, 2GB RAM, 1.6 GHz Pentium M processor

*** lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] (rev 02)

*** xrandr -q:
Screen 0: minimum 320 x 200, current 1400 x 1050, maximum 2800 x 1050
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1400x1050+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1400x1050      60.0*+
   1280x1024      59.9     60.0  
   1280x960       60.0     59.9  
   1280x854       59.9  
   1360x768       59.8  
   1280x800       59.8  
   1152x864       60.0  
   1280x720       59.9  
   1152x768       59.8  
   1024x768       60.0     59.9  
   800x600        60.3     59.9  
   640x480        59.9     59.4  
S-video disconnected (normal left inverted right x axis y axis)

*** here is my xorg.conf file from /etc/X11/xorg.conf (this one worked in Intrepid) 
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
	Identifier      "Radeon 9000"
	Driver          "ati"
	BusID           "PCI:1:0:0"
	Option          "monitor-LVDS"          "laptop"
	Option          "TVDACLoadDetect"       "TRUE"
	Option          "TVStandard"            "ntsc"
	Option          "monitor-S-video"       "SONY"
EndSection

Section "Monitor"
	Identifier      "laptop"
EndSection

Section "Monitor"
	Identifier	"SONY"
EndSection

Section "Screen"
	Identifier      "Default Screen"
	Monitor         "laptop"
	Device          "Radeon 9000"
	DefaultDepth    24
	SubSection "Display"
		Depth       24
		Modes       "1400x1050" "1280x1024" "1280x960" "1360x768" "1152x864" "1024x768" "800x600" "640x480"
		Virtual     2800 1050
	        #(virtual for 22in Visio(1680x1063) = 3080 1063, virtual for 32in Sony(800x600) = 2200 1050
	EndSubSection
EndSection


*** From Xorg.0.log: 
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux i600m 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=8204d2e4-0d50-4937-8aca-5018c99ead3b ro quiet splash
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@) 


I can't figure out why I cannot get dual monitors working in Karmic as it worked perfectly in Intrepid with the above xorg.conf file. Let me know if I can provide any other log information okay. Any help getting s-video out to tv working would be greatly appreciated. Thanks in advance. 

Cheers,
ed

ProblemType: Bug
Architecture: i386
CheckboxCommand: xrandr
CheckboxDescription:
 The following screens and video modes have been detected on your system:
 
 $output
 
 Is this correct?
CheckboxTest: xrandr_detect_modes
Date: Sat Oct 31 10:12:03 2009
DistroRelease: Ubuntu 9.10
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
MachineType: Dell Computer Corporation Inspiron 600m
Package: x11-xserver-utils 7.4+2ubuntu3
PccardctlIdent:
 Socket 0:
   no product info available
 Socket 1:
   product info: "O2Micro", "SmartCardBus Reader", "V1.0", ""
   manfid: 0xffff, 0x0001
PccardctlStatus:
 Socket 0:
   3.3V 32-bit PC Card
 Socket 1:
   5.0V 16-bit PC Card
   Subdevice 0 (function 0) [unbound]
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=8204d2e4-0d50-4937-8aca-5018c99ead3b ro quiet splash
ProcEnviron:
 SHELL=/bin/bash
 LANG=en_US.UTF-8
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
 xserver-xorg 1:7.4+3ubuntu7
 libgl1-mesa-glx 7.6.0-1ubuntu4
 libdrm2 2.4.14-1ubuntu1
 xserver-xorg-video-intel 2:2.9.0-1ubuntu2
 xserver-xorg-video-ati 1:6.12.99+git20090929.7968e1fb-0ubuntu1
SourcePackage: x11-xserver-utils
Tags: checkbox-bug
Uname: Linux 2.6.31-14-generic i686
dmi.bios.date: 06/29/2005
dmi.bios.vendor: Dell Computer Corporation
dmi.bios.version: A17
dmi.board.name: 0D9222
dmi.board.vendor: Dell Computer Corporation
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Computer Corporation
dmi.modalias: dmi:bvnDellComputerCorporation:bvrA17:bd06/29/2005:svnDellComputerCorporation:pnInspiron600m:pvr:rvnDellComputerCorporation:rn0D9222:rvr:cvnDellComputerCorporation:ct8:cvr:
dmi.product.name: Inspiron 600m
dmi.sys.vendor: Dell Computer Corporation
fglrx: Not loaded
system:
 distro:             Ubuntu
 architecture:       i686kernel:             2.6.31-14-generic

** Affects: x11-xserver-utils (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: apport-bug checkbox-bug i386

-- 
can't force tv out on s-video in xorg.con /karmic
https://bugs.launchpad.net/bugs/467005
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to x11-xserver-utils in ubuntu.