← Back to team overview

ubuntu-x-swat team mailing list archive

[Bug 487361] Re: nvidia 7600GS does not boot from install cd or from first boot

 

** Description changed:

  The default xorg driver does not show a workable screen from the install
  cd or from the standard xorg driver after installation.  I needed to
  drop to a root console to install the nv 180 driver for my nvidia 7600GS
  systems.  It was very frustrating because about 20 of my systems use the
  nividia 7600GS card.  Having no display show up when booting from cd or
  after using the text install from the 1st hard drive on every machine
  was a pain.  I have noticed several bug reports with the nvidia 7600
  cards closed or just dropped.  This is a true bug in the Karmic final
  release.  I have tried it on multiple machines.
  
  karlrhs
  
-  
- Its been having boot problems for about a week now, the pale ACER logo screen appears then goes to a blank screen, also the BIOS setting option dont appear (F2) so I cant get into BIOS. i've been looking around for solutions such as re-seating the RAM, putting the BIOS update on a flash pen drive and booting up holding the FN + ESC keys and tried the ACER Boot disc but none seem to be working. I have a LINUX disc (UBUNTU) it runs from the disc only so it does not affect my machine. It first starts up with the options:
+ Its been having boot problems for about a week now, the pale ACER logo
+ screen appears then goes to a blank screen, also the BIOS setting option
+ dont appear (F2) so I cant get into BIOS. i've been looking around for
+ solutions such as re-seating the RAM, putting the BIOS update on a flash
+ pen drive and booting up holding the FN + ESC keys and tried the ACER
+ Boot disc but none seem to be working. I have a LINUX disc (UBUNTU) it
+ runs from the disc only so it does not affect my machine. It first
+ starts up with the options:
  
  1, Try Ubuntu without any change to your computer
  2, Install Ubuntu
  3, Check disc for defects
  4, Test Memory
  5, Boot from first hard disk (I tried this and it just goes to a blank screen)
  
  It also has F function options:
  
  F1 = Help
  F2 = Language
  F3 = Keymap
  F4 = Modes
  F5 = Accessibility
  F6 = Other Options
  
  "Press F4 to select alternative start-up and installation modes"
  
  I select the first option "Try Ubuntu"
  
  It runs the Ubuntu load up sequence (takes awhile) then it checks if
  everything is [OK]. After this sequence a Error Caution message appears
  saying:
  
  "Ubuntu is running in low-graphics mode"
  The following error was encountered. You may need to update your configuration to solve this.
  
  (EE) NV(0): No valid FB address in PCI config space
  (EE) Screen(s) found, but none have a usable configuration.
  
  The only option i get is to click OK. Then it comes up with a menu
  saying
  
  "What would you like to do?"
  
  1, Run Ubuntu in low-graphics mode for just one session
  2, Reconfigure graphics
  3, Troubleshoot the error
  4, Exit to console login
  
  I ran the first option and a blue screen pops up saying:
  
  "there already appears to be an X server running on display :0. Should
  another display number by tried? Answering no will cause GDM to attempt
  starting the server on :0 again. (You can change consoles by pressing
  Ctrl-Alt plus a function key, such as Ctrl-Alt-F7 to go to console 7. X
  servers usually run on console 7 and higher)"
  
  I press yes and Ubuntu loads. I looked in Hardware Drivers, it comes up
  with three drivers:
  
  1, NVIDIA accelerated graphics driver (version 180) [Recommended]
  2, NVIDIA accelerated graphics driver (version 173)
  3, NVIDIA accelerated graphics driver (version 96)
  
  None of them are Activated and it won't let me activate them. It does
  state "No proprietary drivers are in use on this system".
  
  I restarted to get back to the options above and chose the third option
  "Troubleshoot the error". It comes up with more options:
  
  What information would you like to review?
  
  1, Review the xserver log file
  2, Review the startup errors
  3, Edit configuration file
  4, Archive configuration and logs
  
  I clicked option two and one error was found
  
  "Fatal Server Error: No screens found".
  
  I am not sure where or what to do next, I was running a Windows 7
  professional edition. But it seems to have died on me, Im new to Ubuntu
  so im kind of lost.
  
- Now my system is running ubuntu under a resolution of 800*600 (temporary installation method). 
- Will permenantly installing Ubuntu Fix this?
-  
- I hope the information I gave here is understandable. If you need anymore information please ask.
+ Now my system is running ubuntu under a resolution of 800*600 (temporary
+ installation method).
+ 
+ I hope the information I gave here is understandable. If you need
+ anymore information please ask.

-- 
nvidia 7600GS does not boot from install cd or from first boot
https://bugs.launchpad.net/bugs/487361
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in ubuntu.



Follow ups

References