ubuntu-x-swat team mailing list archive

[Jonatan Castro <ejonatan.castro@xxxxxxxxx>]

Hi,

I have the same problem here on an HP dv3500 laptop.

Here is my ouput of "dmesg">>

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bcbbc000 (usable)
[    0.000000]  BIOS-e820: 00000000bcbbc000 - 00000000bcbbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bcbbf000 - 00000000bde6b000 (usable)
[    0.000000]  BIOS-e820: 00000000bde6b000 - 00000000bdebf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdebf000 - 00000000bdf86000 (usable)
[    0.000000]  BIOS-e820: 00000000bdf86000 - 00000000bdfbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdfbf000 - 00000000bdfe1000 (usable)
[    0.000000]  BIOS-e820: 00000000bdfe1000 - 00000000bdff6000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bdff6000 - 00000000be000000 (usable)
[    0.000000]  BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-CFFFF uncachable
[    0.000000]   D0000-DFFFF write-protect
[    0.000000]   E0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFF00000 mask FFFF00000 write-protect
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009e000 (usable)
[    0.000000]  modified: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000bcbbc000 (usable)
[    0.000000]  modified: 00000000bcbbc000 - 00000000bcbbf000 (ACPI NVS)
[    0.000000]  modified: 00000000bcbbf000 - 00000000bde6b000 (usable)
[    0.000000]  modified: 00000000bde6b000 - 00000000bdebf000 (reserved)
[    0.000000]  modified: 00000000bdebf000 - 00000000bdf86000 (usable)
[    0.000000]  modified: 00000000bdf86000 - 00000000bdfbf000 (ACPI NVS)
[    0.000000]  modified: 00000000bdfbf000 - 00000000bdfe1000 (usable)
[    0.000000]  modified: 00000000bdfe1000 - 00000000bdff6000 (ACPI data)
[    0.000000]  modified: 00000000bdff6000 - 00000000be000000 (usable)
[    0.000000]  modified: 00000000be000000 - 00000000c0000000 (reserved)
[    0.000000]  modified: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 378a4000 - 37fef2a8
[    0.000000] Allocated new RAMDISK: 008ad000 - 00ff82a8
[    0.000000] Move RAMDISK from 00000000378a4000 - 0000000037fef2a7 to 008ad000 - 00ff82a7
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 HP    )
[    0.000000] ACPI: XSDT bdff5120 00064 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP bdfe2000 000F4 (v04 HP     DIABLO   00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT bdfe5000 0A602 (v01 HP     DIABLO   00000001 MSFT 01000013)
[    0.000000] ACPI: FACS bdf92000 00040
[    0.000000] ACPI: HPET bdff3000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC bdff2000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG bdff1000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! bdff0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC bdfe4000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
[    0.000000] ACPI: BOOT bdfe3000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT bdfe1000 00655 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2152MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[    0.000000]   #4 [000009e000 - 0000100000]    BIOS reserved ==> [000009e000 - 0000100000]
[    0.000000]   #5 [00008a9000 - 00008ac1d4]              BRK ==> [00008a9000 - 00008ac1d4]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008ad000 - 0000ff82a8]      NEW RAMDISK ==> [00008ad000 - 0000ff82a8]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000be000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[7] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000bcbbc
[    0.000000]     0: 0x000bcbbf -> 0x000bde6b
[    0.000000]     0: 0x000bdebf -> 0x000bdf86
[    0.000000]     0: 0x000bdfbf -> 0x000bdfe1
[    0.000000]     0: 0x000bdff6 -> 0x000be000
[    0.000000] On node 0 totalpages: 777973
[    0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3962 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4305 pages used for memmap
[    0.000000]   HighMem zone: 546444 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c27d0000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 771892
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=3f5a99e6-644e-4440-8754-6c3b99871653 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 15564800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000be000)
[    0.000000] Memory: 3055068k/3112960k available (4565k kernel code, 55960k reserved, 2143k data, 540k init, 2202996k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575554 - 0xc078d308   (2143 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575554   (4565 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1995.077 MHz processor.
[    0.002807] Console: colour VGA+ 80x25
[    0.002810] console [tty0] enabled
[    0.002972] hpet clockevent registered
[    0.002977] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.002982] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.15 BogoMIPS (lpj=7980308)
[    0.002998] Security Framework initialized
[    0.003017] AppArmor: AppArmor initialized
[    0.003024] Mount-cache hash table entries: 512
[    0.003143] Initializing cgroup subsys ns
[    0.003148] Initializing cgroup subsys cpuacct
[    0.003152] Initializing cgroup subsys memory
[    0.003158] Initializing cgroup subsys freezer
[    0.003160] Initializing cgroup subsys net_cls
[    0.003175] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.003177] CPU: L2 cache: 3072K
[    0.003180] CPU: Physical Processor ID: 0
[    0.003182] CPU: Processor Core ID: 0
[    0.003185] mce: CPU supports 6 MCE banks
[    0.003193] CPU0: Thermal monitoring enabled (TM1)
[    0.003197] using mwait in idle threads.
[    0.003202] Performance Counters: Core2 events, Intel PMU driver.
[    0.003210] ... version:                 2
[    0.003212] ... bit width:               40
[    0.003213] ... generic counters:        2
[    0.003215] ... value mask:              000000ffffffffff
[    0.003217] ... max period:              000000007fffffff
[    0.003219] ... fixed-purpose counters:  3
[    0.003220] ... counter mask:            0000000700000003
[    0.003224] Checking 'hlt' instruction... OK.
[    0.018701] ACPI: Core revision 20090521
[    0.036394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.078571] CPU0: Intel(R) Core(TM)2 Duo CPU     P7350  @ 2.00GHz stepping 06
[    0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3990.38 BogoMIPS (lpj=7980778)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] mce: CPU supports 6 MCE banks
[    0.004000] CPU1: Thermal monitoring enabled (TM1)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.165591] CPU1: Intel(R) Core(TM)2 Duo CPU     P7350  @ 2.00GHz stepping 06
[    0.165604] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.168020] Brought up 2 CPUs
[    0.168022] Total of 2 processors activated (7980.54 BogoMIPS).
[    0.168072] CPU0 attaching sched-domain:
[    0.168075]  domain 0: span 0-1 level MC
[    0.168077]   groups: 0 1
[    0.168082] CPU1 attaching sched-domain:
[    0.168084]  domain 0: span 0-1 level MC
[    0.168087]   groups: 1 0
[    0.168159] Booting paravirtualized kernel on bare hardware
[    0.168206] regulator: core version 0.5
[    0.168206] Time: 23:05:11  Date: 11/30/09
[    0.168206] NET: Registered protocol family 16
[    0.168206] EISA bus registered
[    0.168211] ACPI: bus type pci registered
[    0.168277] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.168280] PCI: MCFG area at f8000000 reserved in E820
[    0.168282] PCI: Using MMCONFIG for extended config space
[    0.168284] PCI: Using configuration type 1 for base access
[    0.169264] bio: create slab <bio-0> at 0
[    0.172711] ACPI: EC: Enabling special treatment for EC from MSI.
[    0.172714] ACPI: EC: Look up EC in DSDT
[    0.176368] ACPI: BIOS _OSI(Linux) query ignored
[    0.436016] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.440560] ACPI: Interpreter enabled
[    0.440560] ACPI: (supports S0 S3 S4 S5)
[    0.440560] ACPI: Using IOAPIC for interrupt routing
[    0.453280] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.453280] ACPI: EC: driver started in interrupt mode
[    0.453280] ACPI: Power Resource [FN00] (on)
[    0.454152] ACPI: No dock devices found.
[    0.454657] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.454765] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.454768] pci 0000:00:01.0: PME# disabled
[    0.454882] pci 0000:00:1a.0: reg 20 io port: [0x60e0-0x60ff]
[    0.455008] pci 0000:00:1a.1: reg 20 io port: [0x60c0-0x60df]
[    0.455122] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd9304c00-0xd9304fff]
[    0.455197] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.455202] pci 0000:00:1a.7: PME# disabled
[    0.455257] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd9300000-0xd9303fff]
[    0.455315] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.455319] pci 0000:00:1b.0: PME# disabled
[    0.455392] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.455396] pci 0000:00:1c.0: PME# disabled
[    0.455478] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.455483] pci 0000:00:1c.1: PME# disabled
[    0.455571] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.455576] pci 0000:00:1c.5: PME# disabled
[    0.455670] pci 0000:00:1d.0: reg 20 io port: [0x60a0-0x60bf]
[    0.455800] pci 0000:00:1d.1: reg 20 io port: [0x6080-0x609f]
[    0.455931] pci 0000:00:1d.2: reg 20 io port: [0x6060-0x607f]
[    0.456060] pci 0000:00:1d.3: reg 20 io port: [0x6040-0x605f]
[    0.456169] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd9304800-0xd9304bff]
[    0.456244] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.456249] pci 0000:00:1d.7: PME# disabled
[    0.456477] pci 0000:00:1f.2: reg 10 io port: [0x6108-0x610f]
[    0.456485] pci 0000:00:1f.2: reg 14 io port: [0x6114-0x6117]
[    0.456493] pci 0000:00:1f.2: reg 18 io port: [0x6100-0x6107]
[    0.456500] pci 0000:00:1f.2: reg 1c io port: [0x6110-0x6113]
[    0.456508] pci 0000:00:1f.2: reg 20 io port: [0x6020-0x603f]
[    0.456515] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd9304000-0xd93047ff]
[    0.456559] pci 0000:00:1f.2: PME# supported from D3hot
[    0.456564] pci 0000:00:1f.2: PME# disabled
[    0.456602] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd9305000-0xd93050ff]
[    0.456620] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
[    0.456713] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
[    0.456731] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[    0.456749] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
[    0.456760] pci 0000:01:00.0: reg 24 io port: [0x5000-0x507f]
[    0.456770] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.456889] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff]
[    0.456892] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
[    0.456897] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[    0.456956] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
[    0.456981] pci 0000:02:00.0: reg 18 64bit mmio: [0xd8200000-0xd8200fff]
[    0.456998] pci 0000:02:00.0: reg 20 64bit mmio: [0xd3000000-0xd300ffff]
[    0.457009] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.457060] pci 0000:02:00.0: supports D1 D2
[    0.457063] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.457068] pci 0000:02:00.0: PME# disabled
[    0.457147] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff]
[    0.457152] pci 0000:00:1c.0: bridge 32bit mmio: [0xd8200000-0xd92fffff]
[    0.457160] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd40fffff]
[    0.457271] pci 0000:03:00.0: reg 10 64bit mmio: [0xd7100000-0xd7101fff]
[    0.457383] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.457394] pci 0000:03:00.0: PME# disabled
[    0.457477] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[    0.457482] pci 0000:00:1c.1: bridge 32bit mmio: [0xd7100000-0xd81fffff]
[    0.457490] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd4100000-0xd50fffff]
[    0.457548] pci 0000:00:1c.5: bridge io port: [0x1000-0x1fff]
[    0.457553] pci 0000:00:1c.5: bridge 32bit mmio: [0xd6100000-0xd70fffff]
[    0.457561] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd5100000-0xd60fffff]
[    0.457623] pci 0000:00:1e.0: transparent bridge
[    0.457662] pci_bus 0000:00: on NUMA node 0
[    0.457669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.457959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.458037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.458182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.458292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.458392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[    0.472086] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.472214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.472341] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.472466] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.472593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.472722] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.472850] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
[    0.472975] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.473161] SCSI subsystem initialized
[    0.473170] libata version 3.00 loaded.
[    0.473170] usbcore: registered new interface driver usbfs
[    0.473170] usbcore: registered new interface driver hub
[    0.473170] usbcore: registered new device driver usb
[    0.473170] ACPI: WMI: Mapper loaded
[    0.473170] PCI: Using ACPI for IRQ routing
[    0.484008] Bluetooth: Core ver 2.15
[    0.484013] NET: Registered protocol family 31
[    0.484014] Bluetooth: HCI device and connection manager initialized
[    0.484017] Bluetooth: HCI socket layer initialized
[    0.484019] NetLabel: Initializing
[    0.484020] NetLabel:  domain hash size = 128
[    0.484022] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.484034] NetLabel:  unlabeled traffic allowed by default
[    0.484065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.484071] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.501631] Switched to high resolution mode on CPU 1
[    0.501639] pnp: PnP ACPI init
[    0.501648] ACPI: bus type pnp registered
[    0.504006] Switched to high resolution mode on CPU 0
[    0.504088] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 13 (0x1000-0x1fff), disabling
[    0.504816]   alloc irq_desc for 23 on node -1
[    0.504819]   alloc kstat_irqs on node -1
[    0.504869] pnp: PnP ACPI: found 11 devices
[    0.504871] ACPI: ACPI bus type pnp unregistered
[    0.504874] PnPBIOS: Disabled by ACPI PNP
[    0.504883] system 00:01: ioport range 0x600-0x60f has been reserved
[    0.504886] system 00:01: ioport range 0x610-0x610 has been reserved
[    0.504889] system 00:01: ioport range 0x800-0x80f has been reserved
[    0.504892] system 00:01: ioport range 0x810-0x817 has been reserved
[    0.504895] system 00:01: ioport range 0x820-0x823 has been reserved
[    0.504897] system 00:01: ioport range 0x400-0x47f has been reserved
[    0.504900] system 00:01: ioport range 0x700-0x73f has been reserved
[    0.504903] system 00:01: ioport range 0x500-0x501 has been reserved
[    0.504907] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.504910] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.504913] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[    0.504916] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.504919] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.504922] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.504925] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.504928] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.504931] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.504934] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.540082] AppArmor: AppArmor Filesystem Enabled
[    0.540098] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[    0.540102] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[    0.540147] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[    0.540150] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.540153] pci 0000:00:01.0:   IO window: 0x5000-0x5fff
[    0.540157] pci 0000:00:01.0:   MEM window: 0xd0000000-0xd2ffffff
[    0.540161] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.540166] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.540169] pci 0000:00:1c.0:   IO window: 0x3000-0x4fff
[    0.540176] pci 0000:00:1c.0:   MEM window: 0xd8200000-0xd92fffff
[    0.540181] pci 0000:00:1c.0:   PREFETCH window: 0x000000d3000000-0x000000d40fffff
[    0.540189] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.540193] pci 0000:00:1c.1:   IO window: 0x2000-0x2fff
[    0.540199] pci 0000:00:1c.1:   MEM window: 0xd7100000-0xd81fffff
[    0.540203] pci 0000:00:1c.1:   PREFETCH window: 0x000000d4100000-0x000000d50fffff
[    0.540212] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05
[    0.540215] pci 0000:00:1c.5:   IO window: 0x1000-0x1fff
[    0.540221] pci 0000:00:1c.5:   MEM window: 0xd6100000-0xd70fffff
[    0.540226] pci 0000:00:1c.5:   PREFETCH window: 0x000000d5100000-0x000000d60fffff
[    0.540234] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.540236] pci 0000:00:1e.0:   IO window: disabled
[    0.540242] pci 0000:00:1e.0:   MEM window: disabled
[    0.540247] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.540256]   alloc irq_desc for 16 on node -1
[    0.540258]   alloc kstat_irqs on node -1
[    0.540262] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.540266] pci 0000:00:01.0: setting latency timer to 64
[    0.540273]   alloc irq_desc for 17 on node -1
[    0.540275]   alloc kstat_irqs on node -1
[    0.540278] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.540283] pci 0000:00:1c.0: setting latency timer to 64
[    0.540291] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.540296] pci 0000:00:1c.1: setting latency timer to 64
[    0.540304] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[    0.540308] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.540313] pci 0000:00:1c.5: setting latency timer to 64
[    0.540351] pci 0000:00:1e.0: setting latency timer to 64
[    0.540355] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.540358] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.540360] pci_bus 0000:01: resource 0 io:  [0x5000-0x5fff]
[    0.540363] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff]
[    0.540365] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[    0.540368] pci_bus 0000:02: resource 0 io:  [0x3000-0x4fff]
[    0.540371] pci_bus 0000:02: resource 1 mem: [0xd8200000-0xd92fffff]
[    0.540373] pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd40fffff]
[    0.540376] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
[    0.540379] pci_bus 0000:03: resource 1 mem: [0xd7100000-0xd81fffff]
[    0.540381] pci_bus 0000:03: resource 2 pref mem [0xd4100000-0xd50fffff]
[    0.540384] pci_bus 0000:05: resource 0 io:  [0x1000-0x1fff]
[    0.540386] pci_bus 0000:05: resource 1 mem: [0xd6100000-0xd70fffff]
[    0.540389] pci_bus 0000:05: resource 2 pref mem [0xd5100000-0xd60fffff]
[    0.540391] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.540394] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.540423] NET: Registered protocol family 2
[    0.540510] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.540789] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.541147] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.541336] TCP: Hash tables configured (established 131072 bind 65536)
[    0.541338] TCP reno registered
[    0.541404] NET: Registered protocol family 1
[    0.541455] Trying to unpack rootfs image as initramfs...
[    0.731706] Freeing initrd memory: 7468k freed
[    0.734779] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.734782] Simple Boot Flag at 0x44 set to 0x1
[    0.734960] cpufreq-nforce2: No nForce2 chipset.
[    0.734989] Scanning for low memory corruption every 60 seconds
[    0.735093] audit: initializing netlink socket (disabled)
[    0.735110] type=2000 audit(1259622311.732:1): initialized
[    0.743716] highmem bounce pool size: 64 pages
[    0.743721] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.745160] VFS: Disk quotas dquot_6.5.2
[    0.745219] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.745755] fuse init (API version 7.12)
[    0.745837] msgmni has been set to 1680
[    0.746032] alg: No test for stdrng (krng)
[    0.746046] io scheduler noop registered
[    0.746048] io scheduler anticipatory registered
[    0.746049] io scheduler deadline registered
[    0.746091] io scheduler cfq registered (default)
[    0.776044] pci 0000:01:00.0: Boot video device
[    0.776154]   alloc irq_desc for 24 on node -1
[    0.776156]   alloc kstat_irqs on node -1
[    0.776165] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.776171] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.776300]   alloc irq_desc for 25 on node -1
[    0.776302]   alloc kstat_irqs on node -1
[    0.776311] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.776322] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.776473]   alloc irq_desc for 26 on node -1
[    0.776475]   alloc kstat_irqs on node -1
[    0.776484] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.776495] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.776646]   alloc irq_desc for 27 on node -1
[    0.776648]   alloc kstat_irqs on node -1
[    0.776657] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[    0.776668] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    0.776769] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.776964] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.778853] ACPI: AC Adapter [AC] (off-line)
[    0.778921] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.778925] ACPI: Power Button [PWRF]
[    0.778976] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.778983] ACPI: Sleep Button [SLPB]
[    0.779022] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.779029] ACPI: Power Button [PWRB]
[    0.779069] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    0.780472] ACPI: Lid Switch [LID0]
[    0.780678] fan PNP0C0B:00: registered as cooling_device0
[    0.780683] ACPI: Fan [FAN] (on)
[    0.781027] ACPI: Invalid PBLK length [8]
[    0.781518] ACPI: SSDT bde76c98 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.782115] ACPI: SSDT bde74618 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.782569] Monitor-Mwait will be used to enter C-1 state
[    0.782592] Monitor-Mwait will be used to enter C-2 state
[    0.782614] Monitor-Mwait will be used to enter C-3 state
[    0.782622] Marking TSC unstable due to TSC halts in idle
[    0.782641] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.782659] processor LNXCPU:00: registered as cooling_device1
[    0.782678] ACPI: Invalid PBLK length [8]
[    0.783141] ACPI: SSDT bde75e18 001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.783605] ACPI: SSDT bde76f18 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.784202] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.784220] processor LNXCPU:01: registered as cooling_device2
[    0.793756] thermal LNXTHERM:01: registered as thermal_zone0
[    0.793764] ACPI: Thermal Zone [TZ0] (56 C)
[    0.798498] thermal LNXTHERM:02: registered as thermal_zone1
[    0.798506] ACPI: Thermal Zone [TZ1] (56 C)
[    0.798566] isapnp: Scanning for PnP cards...
[    0.923888] ACPI: Battery Slot [BAT0] (battery present)
[    1.154449] isapnp: No Plug & Play device found
[    1.155591] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.156871] brd: module loaded
[    1.157310] loop: module loaded
[    1.157377] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.157444] ahci 0000:00:1f.2: version 3.0
[    1.157455]   alloc irq_desc for 19 on node -1
[    1.157457]   alloc kstat_irqs on node -1
[    1.157462] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.157492]   alloc irq_desc for 28 on node -1
[    1.157494]   alloc kstat_irqs on node -1
[    1.157503] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[    1.157552] ahci: SSS flag set, parallel bus scan disabled
[    1.157591] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.157594] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems 
[    1.157600] ahci 0000:00:1f.2: setting latency timer to 64
[    1.180064] scsi0 : ahci
[    1.180141] scsi1 : ahci
[    1.180198] scsi2 : ahci
[    1.180251] scsi3 : ahci
[    1.180304] scsi4 : ahci
[    1.180360] scsi5 : ahci
[    1.180501] ata1: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304100 irq 28
[    1.180513] ata2: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304180 irq 28
[    1.180516] ata3: DUMMY
[    1.180517] ata4: DUMMY
[    1.180520] ata5: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304300 irq 28
[    1.180524] ata6: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304380 irq 28
[    1.181389] Fixed MDIO Bus: probed
[    1.181422] PPP generic driver version 2.4.2
[    1.181505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.181522] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.181532] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.181536] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.181579] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.185477] ehci_hcd 0000:00:1a.7: debug port 1
[    1.185484] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    1.185497] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd9304c00
[    1.200016] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.200089] usb usb1: configuration #1 chosen from 1 choice
[    1.200117] hub 1-0:1.0: USB hub found
[    1.200124] hub 1-0:1.0: 4 ports detected
[    1.200178]   alloc irq_desc for 20 on node -1
[    1.200180]   alloc kstat_irqs on node -1
[    1.200185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.200194] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.200198] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.200226] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.204124] ehci_hcd 0000:00:1d.7: debug port 1
[    1.204130] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.204143] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd9304800
[    1.216017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.216074] usb usb2: configuration #1 chosen from 1 choice
[    1.216101] hub 2-0:1.0: USB hub found
[    1.216107] hub 2-0:1.0: 8 ports detected
[    1.216170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.216185] uhci_hcd: USB Universal Host Controller Interface driver
[    1.216203] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.216210] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.216213] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.216241] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.216274] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060e0
[    1.216355] usb usb3: configuration #1 chosen from 1 choice
[    1.216380] hub 3-0:1.0: USB hub found
[    1.216386] hub 3-0:1.0: 2 ports detected
[    1.216430]   alloc irq_desc for 22 on node -1
[    1.216435]   alloc kstat_irqs on node -1
[    1.216439] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    1.216446] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.216449] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.216482] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.216525] uhci_hcd 0000:00:1a.1: irq 22, io base 0x000060c0
[    1.216599] usb usb4: configuration #1 chosen from 1 choice
[    1.216623] hub 4-0:1.0: USB hub found
[    1.216629] hub 4-0:1.0: 2 ports detected
[    1.216676] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.216683] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.216686] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.216713] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    1.216738] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000060a0
[    1.216811] usb usb5: configuration #1 chosen from 1 choice
[    1.216836] hub 5-0:1.0: USB hub found
[    1.216842] hub 5-0:1.0: 2 ports detected
[    1.216888] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.216894] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.216898] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.216927] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    1.216953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006080
[    1.217026] usb usb6: configuration #1 chosen from 1 choice
[    1.217051] hub 6-0:1.0: USB hub found
[    1.217057] hub 6-0:1.0: 2 ports detected
[    1.217102] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.217109] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.217112] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.217144] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    1.217169] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00006060
[    1.217241] usb usb7: configuration #1 chosen from 1 choice
[    1.217266] hub 7-0:1.0: USB hub found
[    1.217271] hub 7-0:1.0: 2 ports detected
[    1.217323]   alloc irq_desc for 18 on node -1
[    1.217325]   alloc kstat_irqs on node -1
[    1.217329] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.217335] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.217339] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.217376] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    1.217408] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040
[    1.217479] usb usb8: configuration #1 chosen from 1 choice
[    1.217503] hub 8-0:1.0: USB hub found
[    1.217511] hub 8-0:1.0: 2 ports detected
[    1.217604] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.221380] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.224226] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.224231] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.224234] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.224237] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.224240] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.224290] mice: PS/2 mouse device common for all mice
[    1.224423] rtc_cmos 00:03: RTC can wake from S4
[    1.224452] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.224481] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.224585] device-mapper: uevent: version 1.0.3
[    1.224665] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[    1.224749] device-mapper: multipath: version 1.1.0 loaded
[    1.224751] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.224862] EISA: Probing bus 0 at eisa.0
[    1.224868] Cannot allocate resource for EISA slot 1
[    1.224870] Cannot allocate resource for EISA slot 2
[    1.224872] Cannot allocate resource for EISA slot 3
[    1.224873] Cannot allocate resource for EISA slot 4
[    1.224875] Cannot allocate resource for EISA slot 5
[    1.224877] Cannot allocate resource for EISA slot 6
[    1.224887] EISA: Detected 0 cards.
[    1.225044] cpuidle: using governor ladder
[    1.225162] cpuidle: using governor menu
[    1.225627] TCP cubic registered
[    1.225775] NET: Registered protocol family 10
[    1.226209] lo: Disabled Privacy Extensions
[    1.226530] NET: Registered protocol family 17
[    1.226545] Bluetooth: L2CAP ver 2.13
[    1.226547] Bluetooth: L2CAP socket layer initialized
[    1.226550] Bluetooth: SCO (Voice Link) ver 0.6
[    1.226552] Bluetooth: SCO socket layer initialized
[    1.226581] Bluetooth: RFCOMM TTY layer initialized
[    1.226584] Bluetooth: RFCOMM socket layer initialized
[    1.226586] Bluetooth: RFCOMM ver 1.11
[    1.227012] Using IPI No-Shortcut mode
[    1.227069] PM: Resume from disk failed.
[    1.227080] registered taskstats version 1
[    1.227187]   Magic number: 1:241:101
[    1.227258] rtc_cmos 00:03: setting system clock to 2009-11-30 23:05:12 UTC (1259622312)
[    1.227261] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.227263] EDD information not available.
[    1.260429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.500051] Clocksource tsc unstable (delta = -257674303 ns)
[    1.664101] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.664818] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40F, max UDMA/100
[    1.664822] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.665868] ata1.00: configured for UDMA/100
[    1.680403] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
[    1.680519] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.680560] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.680604] sd 0:0:0:0: [sda] Write Protect is off
[    1.680607] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.680629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.680743]  sda: sda1 sda2 sda3 sda4 < sda5
[    1.736063] usb 2-4: new high speed USB device using ehci_hcd and address 2
[    1.736231]  sda6 >
[    1.736584] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.905501] usb 2-4: configuration #1 chosen from 1 choice
[    2.144057] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    2.302386] usb 3-1: configuration #1 chosen from 1 choice
[    2.544093] usb 3-2: new full speed USB device using uhci_hcd and address 3
[    2.568101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.573513] ata2.00: ATAPI: Optiarc  DVD RW AD-7910S, 1.81, max UDMA/100
[    2.579937] ata2.00: configured for UDMA/100
[    2.605525] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7910S  1.81 PQ: 0 ANSI: 5
[    2.641008] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.641011] Uniform CD-ROM driver Revision: 3.20
[    2.641098] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.641141] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.721388] usb 3-2: configuration #1 chosen from 1 choice
[    2.960103] ata5: SATA link down (SStatus 0 SControl 300)
[    3.296103] ata6: SATA link down (SStatus 0 SControl 300)
[    3.312176] Freeing unused kernel memory: 540k freed
[    3.312486] Write protecting the kernel text: 4568k
[    3.312561] Write protecting the kernel read-only data: 1836k
[    3.432049] acpi device:03: registered as cooling_device3
[    3.432185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
[    3.432223] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.439716] Linux agpgart interface v0.103
[    3.497391] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.497412] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.497457] r8169 0000:02:00.0: setting latency timer to 64
[    3.497513]   alloc irq_desc for 29 on node -1
[    3.497515]   alloc kstat_irqs on node -1
[    3.497532] r8169 0000:02:00.0: irq 29 for MSI/MSI-X
[    3.498153] eth0: RTL8168c/8111c at 0xf80fc000, 00:24:81:5a:e0:8e, XID 3c4000c0 IRQ 29
[    5.556056] PM: Starting manual resume from disk
[    5.556060] PM: Resume from partition 8:5
[    5.556062] PM: Checking hibernation image.
[    5.556242] PM: Resume from disk failed.
[    5.566432] EXT4-fs (sda6): barriers enabled
[    5.580934] kjournald2 starting: pid 409, dev sda6:8, commit interval 5 seconds
[    5.580961] EXT4-fs (sda6): delayed allocation enabled
[    5.580966] EXT4-fs: file extents enabled
[    5.581066] EXT4-fs: mballoc enabled
[    5.581085] EXT4-fs (sda6): mounted filesystem with ordered data mode
[    6.390904] type=1505 audit(1259622317.660:2): operation="profile_load" pid=432 name=/usr/share/gdm/guest-session/Xsession
[    6.433179] type=1505 audit(1259622317.704:3): operation="profile_load" pid=433 name=/sbin/dhclient3
[    6.433915] type=1505 audit(1259622317.704:4): operation="profile_load" pid=433 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    6.434306] type=1505 audit(1259622317.704:5): operation="profile_load" pid=433 name=/usr/lib/connman/scripts/dhclient-script
[    6.492747] type=1505 audit(1259622317.765:6): operation="profile_load" pid=434 name=/usr/bin/evince
[    6.504325] type=1505 audit(1259622317.773:7): operation="profile_load" pid=434 name=/usr/bin/evince-previewer
[    6.511175] type=1505 audit(1259622317.781:8): operation="profile_load" pid=434 name=/usr/bin/evince-thumbnailer
[    6.567017] type=1505 audit(1259622317.836:9): operation="profile_load" pid=436 name=/usr/lib/cups/backend/cups-pdf
[    6.567862] type=1505 audit(1259622317.836:10): operation="profile_load" pid=436 name=/usr/sbin/cupsd
[    6.605769] type=1505 audit(1259622317.876:11): operation="profile_load" pid=437 name=/usr/sbin/dhcpd3
[    7.906842] Adding 4192924k swap on /dev/sda5.  Priority:-1 extents:1 across:4192924k 
[    8.371862] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
[    8.384298] EXT4-fs (sda6): internal journal on sda6:8
[   10.395235] udev: starting version 147
[   11.228977] lp: driver loaded but no devices found
[   12.040934] Bluetooth: Generic Bluetooth USB driver ver 0.5
[   12.041043] usbcore: registered new interface driver btusb
[   12.456641] cfg80211: Calling CRDA to update world regulatory domain
[   12.493253] __ratelimit: 6 callbacks suppressed
[   12.493256] type=1505 audit(1259633123.765:14): operation="profile_replace" pid=774 name=/usr/share/gdm/guest-session/Xsession
[   12.494925] type=1505 audit(1259633123.765:15): operation="profile_replace" pid=775 name=/sbin/dhclient3
[   12.495648] type=1505 audit(1259633123.765:16): operation="profile_replace" pid=775 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   12.496042] type=1505 audit(1259633123.765:17): operation="profile_replace" pid=775 name=/usr/lib/connman/scripts/dhclient-script
[   12.499591] type=1505 audit(1259633123.769:18): operation="profile_replace" pid=776 name=/usr/bin/evince
[   12.511234] type=1505 audit(1259633123.781:19): operation="profile_replace" pid=776 name=/usr/bin/evince-previewer
[   12.518206] type=1505 audit(1259633123.789:20): operation="profile_replace" pid=776 name=/usr/bin/evince-thumbnailer
[   12.527653] type=1505 audit(1259633123.797:21): operation="profile_replace" pid=779 name=/usr/lib/cups/backend/cups-pdf
[   12.528516] type=1505 audit(1259633123.801:22): operation="profile_replace" pid=779 name=/usr/sbin/cupsd
[   12.530897] type=1505 audit(1259633123.801:23): operation="profile_replace" pid=780 name=/usr/sbin/dhcpd3
[   14.343600] nvidia: module license 'NVIDIA' taints kernel.
[   14.343604] Disabling lock debugging due to kernel taint
[   14.397268] Linux video capture interface: v2.00
[   14.398305] lis3lv02d: laptop model unknown, using default axes configuration
[   14.398992] lis3lv02d: 1-byte sensor found
[   14.411003] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   14.411077] Registered led device: hp::hddprotect
[   14.411088] lis3lv02d driver loaded.
[   14.567420] cfg80211: World regulatory domain updated:
[   14.567423] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.567426] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.567429] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.567431] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.567434] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.567436] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.597044] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.597059] nvidia 0000:01:00.0: setting latency timer to 64
[   14.597182] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
[   14.907511] uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a09)
[   14.923821] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
[   14.923867] usbcore: registered new interface driver uvcvideo
[   14.923870] USB Video Class driver (v0.1.0)
[   15.320247] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input9
[   15.432966] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.697034] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[   16.697038] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   16.697119] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   16.697149] iwlagn 0000:03:00.0: setting latency timer to 64
[   16.697198] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   16.736929] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   16.736991]   alloc irq_desc for 30 on node -1
[   16.736993]   alloc kstat_irqs on node -1
[   16.737013] iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
[   17.075796] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   18.000860] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   18.000909]   alloc irq_desc for 31 on node -1
[   18.000911]   alloc kstat_irqs on node -1
[   18.000925] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X
[   18.000958] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   18.070770] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.070773] Bluetooth: BNEP filters: protocol multicast
[   18.169307] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   18.181810] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   18.181874] input: HDA Intel Line Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   18.181931] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   18.240888] Bridge firewalling registered
[   23.487063] r8169: eth0: link down
[   23.487257] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.721883] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
[   24.000871] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
[   24.148893] Registered led device: iwl-phy0::radio
[   24.148939] Registered led device: iwl-phy0::assoc
[   24.148986] Registered led device: iwl-phy0::RX
[   24.149026] Registered led device: iwl-phy0::TX
[   24.173599] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.045347] __ratelimit: 6 callbacks suppressed
[   26.045355] type=1503 audit(1259633137.317:26): operation="open" pid=1219 parent=1218 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   27.749027] CPU0 attaching NULL sched-domain.
[   27.749039] CPU1 attaching NULL sched-domain.
[   27.768164] CPU0 attaching sched-domain:
[   27.768172]  domain 0: span 0-1 level MC
[   27.768179]   groups: 0 1
[   27.768189]   domain 1: span 0-1 level CPU
[   27.768195]    groups: 0-1 (__cpu_power = 2048)
[   27.768208] CPU1 attaching sched-domain:
[   27.768213]  domain 0: span 0-1 level MC
[   27.768219]   groups: 1 0
[   27.768228]   domain 1: span 0-1 level CPU
[   27.768234]    groups: 0-1 (__cpu_power = 2048)
[   27.990314] type=1503 audit(1259633139.260:27): operation="open" pid=1409 parent=1408 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   28.480248] type=1503 audit(1259633139.749:28): operation="open" pid=1524 parent=1416 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   29.111534] type=1503 audit(1259633140.381:29): operation="open" pid=1531 parent=1530 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   30.137830] type=1503 audit(1259633141.408:30): operation="open" pid=1545 parent=1544 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   31.518045] type=1503 audit(1259633142.788:31): operation="open" pid=1561 parent=1560 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   31.607150] type=1503 audit(1259633142.877:32): operation="open" pid=1572 parent=1571 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   36.606994] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   36.607002] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance
[   36.607005] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[   36.607008] vboxdrv: the usage of hardware performance counters by
[   36.607011] vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
[   36.607019] vboxdrv: Found 2 processor cores.
[   36.607185] vboxdrv: fAsync=0 offMin=0x474 offMax=0xa014
[   36.607270] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   36.607275] vboxdrv: Successfully loaded version 3.0.8 (interface 0x000e0000).
[   40.458462] ppdev: user-space parallel port driver
[   49.572601] CPU0 attaching NULL sched-domain.
[   49.572607] CPU1 attaching NULL sched-domain.
[   49.592090] CPU0 attaching sched-domain:
[   49.592094]  domain 0: span 0-1 level MC
[   49.592098]   groups: 0 1
[   49.592103]   domain 1: span 0-1 level CPU
[   49.592106]    groups: 0-1 (__cpu_power = 2048)
[   49.592113] CPU1 attaching sched-domain:
[   49.592116]  domain 0: span 0-1 level MC
[   49.592119]   groups: 1 0
[   49.592123]   domain 1: span 0-1 level CPU
[   49.592126]    groups: 0-1 (__cpu_power = 2048)
[   89.116040] wlan0: authenticate with AP 00:21:29:7a:28:4a
[   89.117990] wlan0: authenticated
[   89.117994] wlan0: associate with AP 00:21:29:7a:28:4a
[   89.120318] wlan0: RX AssocResp from 00:21:29:7a:28:4a (capab=0x411 status=0 aid=2)
[   89.120321] wlan0: associated
[   89.121750] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   89.315908] padlock: VIA PadLock not detected.
[   99.144039] wlan0: no IPv6 routers present

-- 
[Karmic] Touchpad not recognised correctly, synaptics driver not in use
https://bugs.launchpad.net/bugs/380126
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-input-synaptics in ubuntu.