ubuntu-x-swat team mailing list archive
-
ubuntu-x-swat team
-
Mailing list archive
-
Message #98987
[Bug 675260] Re: segmentation fault in xorg on dual screen eeepc 901
** Description changed:
Binary package hint: xorg
Hi,
I configure my two screens with xrandr:
$ xrandr --output VGA1 --auto --above LVDS1 --output LVDS1 --auto
$ xrandr -q
Screen 0: minimum 320 x 200, current 1680 x 1650, maximum 4096 x 4096
VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 473mm x 296mm
- 1680x1050 60.0*+
- 1280x1024 75.0 60.0
- 1440x900 59.9
- 1152x864 75.0
- 1280x720 75.0
- 1024x768 75.1 70.1 60.0
- 832x624 74.6
- 800x600 72.2 75.0 60.3 56.2
- 640x480 72.8 75.0 66.7 60.0
- 720x400 70.1
+ 1680x1050 60.0*+
+ 1280x1024 75.0 60.0
+ 1440x900 59.9
+ 1152x864 75.0
+ 1280x720 75.0
+ 1024x768 75.1 70.1 60.0
+ 832x624 74.6
+ 800x600 72.2 75.0 60.3 56.2
+ 640x480 72.8 75.0 66.7 60.0
+ 720x400 70.1
LVDS1 connected 1024x600+0+1050 (normal left inverted right x axis y axis) 195mm x 113mm
- 1024x600 60.0*+
- 800x600 85.1 72.2 75.0 60.3 56.2
- 640x480 85.0 72.8 75.0 59.9
- 720x400 85.0
- 640x400 85.1
- 640x350 85.1
+ 1024x600 60.0*+
+ 800x600 85.1 72.2 75.0 60.3 56.2
+ 640x480 85.0 72.8 75.0 59.9
+ 720x400 85.0
+ 640x400 85.1
+ 640x350 85.1
After a while drawing away in Gimp, the X server crashes and restarts to
- failsafe configuration.
+ failsafe configuration. This has happened twice in a short period
+ recently. I also might have been switching windows with KDE and the
+ switcher that shows all windows shrunk side by side filling the screen
+ :) I guess you'll figure out which one it is. It must be using compiz I
+ suppose.
On a separate note, I can only configure dual screen with my LVDS1
- screen below or above AVG1. When I position it side by side, X server
+ screen below or above VGA1. When I position it side by side, X server
crashes immediately.
- Thank you!
+ Thank you for your attention!
$ sudo lspci -vv
- [sudo] password for robajz:
+ [sudo] password for me:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information <?>
- Kernel driver in use: agpgart-intel
- Kernel modules: intel-agp
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
+ Latency: 0
+ Capabilities: [e0] Vendor Specific Information <?>
+ Kernel driver in use: agpgart-intel
+ Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
- Region 1: I/O ports at dc80 [size=8]
- Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
- Region 3: Memory at f7dc0000 (32-bit, non-prefetchable) [size=256K]
- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
- Address: 00000000 Data: 0000
- Capabilities: [d0] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: i915
- Kernel modules: i915
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 16
+ Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
+ Region 1: I/O ports at dc80 [size=8]
+ Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
+ Region 3: Memory at f7dc0000 (32-bit, non-prefetchable) [size=256K]
+ Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
+ Address: 00000000 Data: 0000
+ Capabilities: [d0] Power Management version 2
+ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Kernel driver in use: i915
+ Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
- Capabilities: [d0] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
+ Capabilities: [d0] Power Management version 2
+ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
- Subsystem: ASUSTeK Computer Inc. Device 831a
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 28
- Region 0: Memory at f7db8000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
- Address: 00000000fee0300c Data: 41b1
- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
- ClockPM- Suprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- Capabilities: [100] Virtual Channel <?>
- Capabilities: [130] Root Complex Link <?>
- Kernel driver in use: HDA Intel
- Kernel modules: snd-hda-intel
+ Subsystem: ASUSTeK Computer Inc. Device 831a
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 32 bytes
+ Interrupt: pin A routed to IRQ 28
+ Region 0: Memory at f7db8000 (64-bit, non-prefetchable) [size=16K]
+ Capabilities: [50] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
+ Address: 00000000fee0300c Data: 41b1
+ Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
+ ExtTag- RBE- FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
+ ClockPM- Suprise- LLActRep- BwNot-
+ LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
+ Capabilities: [100] Virtual Channel <?>
+ Capabilities: [130] Root Complex Link <?>
+ Kernel driver in use: HDA Intel
+ Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
- I/O behind bridge: 00001000-00001fff
- Memory behind bridge: 3f800000-3f9fffff
- Prefetchable memory behind bridge: 000000003fa00000-000000003fbfffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
- ClockPM- Suprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
- Address: fee0300c Data: 4159
- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 830f
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100] Virtual Channel <?>
- Capabilities: [180] Root Complex Link <?>
- Kernel driver in use: pcieport
- Kernel modules: shpchp
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 32 bytes
+ Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
+ I/O behind bridge: 00001000-00001fff
+ Memory behind bridge: 3f800000-3f9fffff
+ Prefetchable memory behind bridge: 000000003fa00000-000000003fbfffff
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
+ ExtTag- RBE- FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
+ ClockPM- Suprise- LLActRep+ BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
+ Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
+ Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ Changed: MRL- PresDet- LinkState-
+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
+ RootCap: CRSVisible-
+ RootSta: PME ReqID 0000, PMEStatus- PMEPending-
+ Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
+ Address: fee0300c Data: 4159
+ Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 830f
+ Capabilities: [a0] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [100] Virtual Channel <?>
+ Capabilities: [180] Root Complex Link <?>
+ Kernel driver in use: pcieport
+ Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
- I/O behind bridge: 0000e000-0000efff
- Memory behind bridge: f8000000-fbffffff
- Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Suprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
- Address: fee0300c Data: 4161
- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 830f
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100] Virtual Channel <?>
- Capabilities: [180] Root Complex Link <?>
- Kernel driver in use: pcieport
- Kernel modules: shpchp
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 32 bytes
+ Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
+ I/O behind bridge: 0000e000-0000efff
+ Memory behind bridge: f8000000-fbffffff
+ Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
+ ExtTag- RBE- FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
+ ClockPM- Suprise- LLActRep+ BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
+ SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
+ Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
+ Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ Changed: MRL- PresDet- LinkState-
+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
+ RootCap: CRSVisible-
+ RootSta: PME ReqID 0000, PMEStatus- PMEPending-
+ Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
+ Address: fee0300c Data: 4161
+ Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 830f
+ Capabilities: [a0] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [100] Virtual Channel <?>
+ Capabilities: [180] Root Complex Link <?>
+ Kernel driver in use: pcieport
+ Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 00002000-00002fff
- Memory behind bridge: 3fc00000-3fdfffff
- Prefetchable memory behind bridge: 000000003fe00000-000000003fffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
- ClockPM- Suprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
- Address: fee0300c Data: 4169
- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 830f
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100] Virtual Channel <?>
- Capabilities: [180] Root Complex Link <?>
- Kernel driver in use: pcieport
- Kernel modules: shpchp
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 32 bytes
+ Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
+ I/O behind bridge: 00002000-00002fff
+ Memory behind bridge: 3fc00000-3fdfffff
+ Prefetchable memory behind bridge: 000000003fe00000-000000003fffffff
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
+ ExtTag- RBE- FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
+ ClockPM- Suprise- LLActRep+ BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
+ Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
+ Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ Changed: MRL- PresDet- LinkState-
+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
+ RootCap: CRSVisible-
+ RootSta: PME ReqID 0000, PMEStatus- PMEPending-
+ Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
+ Address: fee0300c Data: 4169
+ Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 830f
+ Capabilities: [a0] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [100] Virtual Channel <?>
+ Capabilities: [180] Root Complex Link <?>
+ Kernel driver in use: pcieport
+ Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 00003000-00003fff
- Memory behind bridge: f7f00000-f7ffffff
- Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
- ExtTag- RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Suprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
- Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- Changed: MRL- PresDet+ LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
- Address: fee0300c Data: 4171
- Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 830f
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100] Virtual Channel <?>
- Capabilities: [180] Root Complex Link <?>
- Kernel driver in use: pcieport
- Kernel modules: shpchp
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 32 bytes
+ Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
+ I/O behind bridge: 00003000-00003fff
+ Memory behind bridge: f7f00000-f7ffffff
+ Prefetchable memory behind bridge: 0000000040000000-00000000401fffff
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
+ DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
+ ExtTag- RBE- FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 128 bytes
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
+ ClockPM- Suprise- LLActRep+ BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
+ Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
+ Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ Changed: MRL- PresDet+ LinkState+
+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
+ RootCap: CRSVisible-
+ RootSta: PME ReqID 0000, PMEStatus- PMEPending-
+ Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
+ Address: fee0300c Data: 4171
+ Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 830f
+ Capabilities: [a0] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [100] Virtual Channel <?>
+ Capabilities: [180] Root Complex Link <?>
+ Kernel driver in use: pcieport
+ Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 23
- Region 4: I/O ports at d480 [size=32]
- Kernel driver in use: uhci_hcd
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 23
+ Region 4: I/O ports at d480 [size=32]
+ Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 19
- Region 4: I/O ports at d800 [size=32]
- Kernel driver in use: uhci_hcd
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin B routed to IRQ 19
+ Region 4: I/O ports at d800 [size=32]
+ Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 18
- Region 4: I/O ports at d880 [size=32]
- Kernel driver in use: uhci_hcd
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin C routed to IRQ 18
+ Region 4: I/O ports at d880 [size=32]
+ Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 16
- Region 4: I/O ports at dc00 [size=32]
- Kernel driver in use: uhci_hcd
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin D routed to IRQ 16
+ Region 4: I/O ports at dc00 [size=32]
+ Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 23
- Region 0: Memory at f7db7c00 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME+
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Kernel driver in use: ehci_hcd
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 23
+ Region 0: Memory at f7db7c00 (32-bit, non-prefetchable) [size=1K]
+ Capabilities: [50] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME+
+ Capabilities: [58] Debug port: BAR=1 offset=00a0
+ Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01)
- Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
+ Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
+ PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
+ Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 830f
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information <?>
- Kernel modules: iTCO_wdt, intel-rng
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Capabilities: [e0] Vendor Specific Information <?>
+ Kernel modules: iTCO_wdt, intel-rng
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) (prog-if 80 [Master])
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 19
- Region 0: I/O ports at 01f0 [size=8]
- Region 1: I/O ports at 03f4 [size=1]
- Region 2: I/O ports at 0170 [size=8]
- Region 3: I/O ports at 0374 [size=1]
- Region 4: I/O ports at ffa0 [size=16]
- Capabilities: [70] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: ata_piix
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin B routed to IRQ 19
+ Region 0: I/O ports at 01f0 [size=8]
+ Region 1: I/O ports at 03f4 [size=1]
+ Region 2: I/O ports at 0170 [size=8]
+ Region 3: I/O ports at 0374 [size=1]
+ Region 4: I/O ports at ffa0 [size=16]
+ Capabilities: [70] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
- Subsystem: ASUSTeK Computer Inc. Device 830f
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin B routed to IRQ 11
- Region 4: I/O ports at 0400 [size=32]
- Kernel modules: i2c-i801
+ Subsystem: ASUSTeK Computer Inc. Device 830f
+ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Interrupt: pin B routed to IRQ 11
+ Region 4: I/O ports at 0400 [size=32]
+ Kernel modules: i2c-i801
03:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
- Subsystem: ASUSTeK Computer Inc. Device 8324
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 32 bytes
- Interrupt: pin A routed to IRQ 29
- Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
- Region 2: I/O ports at ec80 [size=128]
- Capabilities: [40] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
- Address: 00000000fee0300c Data: 41c9
- Capabilities: [58] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
- ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
- ClockPM- Suprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [6c] Vital Product Data <?>
- Capabilities: [100] Advanced Error Reporting <?>
- Capabilities: [180] Device Serial Number ff-15-22-00-d1-03-3b-ff
- Kernel driver in use: ATL1E
- Kernel modules: atl1e
+ Subsystem: ASUSTeK Computer Inc. Device 8324
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+ Latency: 0, Cache Line Size: 32 bytes
+ Interrupt: pin A routed to IRQ 29
+ Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
+ Region 2: I/O ports at ec80 [size=128]
+ Capabilities: [40] Power Management version 2
+ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+ Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
+ Address: 00000000fee0300c Data: 41c9
+ Capabilities: [58] Express (v1) Endpoint, MSI 00
+ DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
+ ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
+ MaxPayload 128 bytes, MaxReadReq 512 bytes
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
+ ClockPM- Suprise- LLActRep- BwNot-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ Capabilities: [6c] Vital Product Data <?>
+ Capabilities: [100] Advanced Error Reporting <?>
+ Capabilities: [180] Device Serial Number ff-15-22-00-d1-03-3b-ff
+ Kernel driver in use: ATL1E
+ Kernel modules: atl1e
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: xorg 1:7.5+5ubuntu1
Uname: Linux 2.6.34-020634-generic i686
Architecture: i386
Date: Sun Nov 14 19:59:38 2010
InstallationMedia: Kubuntu-Netbook 10.04 LTS "Lucid Lynx" - Release i386 (20100427)
ProcEnviron:
- LANGUAGE=
- LANG=en_US.UTF-8
- SHELL=/bin/bash
+ LANGUAGE=
+ LANG=en_US.UTF-8
+ SHELL=/bin/bash
SourcePackage: xorg
system:
- distro: Ubuntu
- codename: lucid
- architecture: i686
- kernel: 2.6.34-020634-generic
+ distro: Ubuntu
+ codename: lucid
+ architecture: i686
+ kernel: 2.6.34-020634-generic
--
segmentation fault in xorg on dual screen eeepc 901
https://bugs.launchpad.net/bugs/675260
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in ubuntu.
References
