ubuntuforums-unanswered team mailing list archive
-
ubuntuforums-unanswered team
-
Mailing list archive
-
Message #07416
[Question #78176]: Touchpad not working
New question #78176 on Ubuntu:
https://answers.launchpad.net/ubuntu/+question/78176
Hi,
I have searched high and low and can't seem to find a way to get my touchpad to work and I have searched forums put my own and even on irc but I have not recieved any response. Please help me out.
Below is my dmesg output
[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3f6e0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 00000000000e4000 (reserved)
[ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f6e0000 (usable)
[ 0.000000] modified: 000000003f6e0000 - 000000003f700000 (ACPI NVS)
[ 0.000000] modified: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378bd000 - 37fef729
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fb3729
[ 0.000000] Move RAMDISK from 00000000378bd000 - 0000000037fef728 to 00881000 - 00fb3728
[ 0.000000] ACPI: RSDP 000F6D40, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3F6E7188, 0048 (r1 PTLTD Capell00 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3F6ECE20, 0074 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: DSDT 3F6E88C9, 4557 (r1 INTEL CALISTGA 6040000 INTL 20050624)
[ 0.000000] ACPI: FACS 3F6EDFC0, 0040
[ 0.000000] ACPI: APIC 3F6ECE94, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3F6ECEFC, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3F6ECF34, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: APIC 3F6ECF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3F6ECFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3F6E827A, 064F (r1 SataRe SataPri 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6E7BDE, 069C (r1 SataRe SataSec 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6E71D0, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 130MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fb3729] NEW RAMDISK ==> [0000881000 - 0000fb3729]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f6d70] 000f6d70
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f6e0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6e0
[ 0.000000] On node 0 totalpages: 259695
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 262 pages used for memmap
[ 0.000000] HighMem zone: 33244 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665
[ 0.000000] Kernel command line: root=UUID=554a442a-987c-49e7-b8fa-52cb61fdd603 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1999.773 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5195840 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 1009212k/1039232k available (4126k kernel code, 29188k reserved, 2208k data, 532k init, 134024k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.54 BogoMIPS (lpj=7999092)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018444] ACPI: Core revision 20080926
[ 0.020183] ACPI: Checking initramfs for custom DSDT
[ 0.320182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.359873] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.360001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3999.53 BogoMIPS (lpj=7999071)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.444654] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.444670] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.448042] Brought up 2 CPUs
[ 0.448045] Total of 2 processors activated (7999.08 BogoMIPS).
[ 0.448102] CPU0 attaching sched-domain:
[ 0.448105] domain 0: span 0-1 level MC
[ 0.448108] groups: 0 1
[ 0.448114] CPU1 attaching sched-domain:
[ 0.448116] domain 0: span 0-1 level MC
[ 0.448118] groups: 1 0
[ 0.448192] net_namespace: 776 bytes
[ 0.448192] Booting paravirtualized kernel on bare hardware
[ 0.448326] Time: 7:10:11 Date: 07/26/09
[ 0.448326] regulator: core version 0.5
[ 0.448326] NET: Registered protocol family 16
[ 0.448326] EISA bus registered
[ 0.448326] ACPI: bus type pci registered
[ 0.448326] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.448326] PCI: MCFG area at e0000000 reserved in E820
[ 0.448326] PCI: Using MMCONFIG for extended config space
[ 0.448326] PCI: Using configuration type 1 for base access
[ 0.449167] ACPI: EC: Look up EC in DSDT
[ 0.453692] ACPI: BIOS _OSI(Linux) query ignored
[ 0.454823] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.454970] ACPI: Interpreter enabled
[ 0.454970] ACPI: (supports S0 S3 S4 S5)
[ 0.454970] ACPI: Using IOAPIC for interrupt routing
[ 0.460681] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.460684] ACPI: EC: driver started in interrupt mode
[ 0.460858] ACPI: No dock devices found.
[ 0.460868] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.460955] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff]
[ 0.460961] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.460966] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
[ 0.460971] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff]
[ 0.461006] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff]
[ 0.461123] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff]
[ 0.461164] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.461169] pci 0000:00:1b.0: PME# disabled
[ 0.461237] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.461241] pci 0000:00:1c.0: PME# disabled
[ 0.461311] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.461374] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.461437] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.461500] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.461567] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff]
[ 0.461615] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.461620] pci 0000:00:1d.7: PME# disabled
[ 0.461781] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.461786] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.461823] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.461831] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.461839] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.461847] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.461855] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.461910] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
[ 0.461918] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
[ 0.461926] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
[ 0.461934] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
[ 0.461942] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.461950] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0544400-0xd05447ff]
[ 0.461970] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.461975] pci 0000:00:1f.2: PME# disabled
[ 0.462037] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.462251] pci 0000:02:00.0: reg 10 32bit mmio: [0xd0000000-0xd0000fff]
[ 0.462416] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.462429] pci 0000:02:00.0: PME# disabled
[ 0.462537] pci 0000:00:1c.0: bridge 32bit mmio: [0xd0000000-0xd00fffff]
[ 0.462595] pci 0000:03:02.0: reg 10 io port: [0x2000-0x20ff]
[ 0.462605] pci 0000:03:02.0: reg 14 32bit mmio: [0xd0100000-0xd01000ff]
[ 0.462655] pci 0000:03:02.0: supports D1 D2
[ 0.462657] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.462662] pci 0000:03:02.0: PME# disabled
[ 0.462719] pci 0000:03:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.462732] pci 0000:03:09.0: supports D1 D2
[ 0.462734] pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.462739] pci 0000:03:09.0: PME# disabled
[ 0.462783] pci 0000:03:09.1: reg 10 32bit mmio: [0xd0100800-0xd0100fff]
[ 0.462832] pci 0000:03:09.1: PME# supported from D0 D3hot D3cold
[ 0.462837] pci 0000:03:09.1: PME# disabled
[ 0.462882] pci 0000:03:09.2: reg 10 32bit mmio: [0xd0100400-0xd01004ff]
[ 0.462932] pci 0000:03:09.2: supports D1 D2
[ 0.462934] pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.462939] pci 0000:03:09.2: PME# disabled
[ 0.462982] pci 0000:03:09.3: reg 10 32bit mmio: [0xd0101000-0xd01010ff]
[ 0.463031] pci 0000:03:09.3: supports D1 D2
[ 0.463033] pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.463038] pci 0000:03:09.3: PME# disabled
[ 0.463083] pci 0000:03:09.4: reg 10 32bit mmio: [0xd0101400-0xd01014ff]
[ 0.463134] pci 0000:03:09.4: supports D1 D2
[ 0.463136] pci 0000:03:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.463141] pci 0000:03:09.4: PME# disabled
[ 0.463196] pci 0000:00:1e.0: transparent bridge
[ 0.463201] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.464004] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
[ 0.464045] bus 00 -> node 0
[ 0.464052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.464372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.464520] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.467496] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.467611] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.467720] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.467830] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.467940] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.468057] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.468166] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.468276] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.468629] ACPI: WMI: Mapper loaded
[ 0.468664] SCSI subsystem initialized
[ 0.468664] libata version 3.00 loaded.
[ 0.468664] usbcore: registered new interface driver usbfs
[ 0.468664] usbcore: registered new interface driver hub
[ 0.468664] usbcore: registered new device driver usb
[ 0.468664] PCI: Using ACPI for IRQ routing
[ 0.476011] Bluetooth: Core ver 2.13
[ 0.476024] NET: Registered protocol family 31
[ 0.476024] Bluetooth: HCI device and connection manager initialized
[ 0.476024] Bluetooth: HCI socket layer initialized
[ 0.476024] NET: Registered protocol family 8
[ 0.476024] NET: Registered protocol family 20
[ 0.476036] NetLabel: Initializing
[ 0.476038] NetLabel: domain hash size = 128
[ 0.476039] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.476052] NetLabel: unlabeled traffic allowed by default
[ 0.476068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.476073] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.480058] AppArmor: AppArmor Filesystem Enabled
[ 0.488008] pnp: PnP ACPI init
[ 0.488018] ACPI: bus type pnp registered
[ 0.490354] pnp: PnP ACPI: found 10 devices
[ 0.490356] ACPI: ACPI bus type pnp unregistered
[ 0.490360] PnPBIOS: Disabled by ACPI PNP
[ 0.490372] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.490375] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.490378] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.490380] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.490383] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.490386] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.490388] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.490391] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.490398] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.490405] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.490407] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.490410] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.490412] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.490414] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.490417] system 00:06: ioport range 0x360-0x361 has been reserved
[ 0.500711] Switched to high resolution mode on CPU 1
[ 0.504004] Switched to high resolution mode on CPU 0
[ 0.525121] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.525123] pci 0000:00:1c.0: IO window: disabled
[ 0.525130] pci 0000:00:1c.0: MEM window: 0xd0000000-0xd00fffff
[ 0.525134] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.525148] pci 0000:03:09.0: CardBus bridge, secondary bus 0000:04
[ 0.525150] pci 0000:03:09.0: IO window: 0x002400-0x0024ff
[ 0.525155] pci 0000:03:09.0: IO window: 0x002800-0x0028ff
[ 0.525160] pci 0000:03:09.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.525165] pci 0000:03:09.0: MEM window: 0x54000000-0x57ffffff
[ 0.525170] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.525174] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.525180] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff
[ 0.525185] pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff
[ 0.525202] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.525207] pci 0000:00:1c.0: setting latency timer to 64
[ 0.525216] pci 0000:00:1e.0: setting latency timer to 64
[ 0.525224] pci 0000:03:09.0: enabling device (0000 -> 0003)
[ 0.525229] pci 0000:03:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.525236] pci 0000:03:09.0: setting latency timer to 64
[ 0.525240] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.525242] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.525245] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.525247] bus: 02 index 1 mmio: [0xd0000000-0xd00fffff]
[ 0.525248] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.525250] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.525252] bus: 03 index 0 io port: [0x2000-0x2fff]
[ 0.525254] bus: 03 index 1 mmio: [0xd0100000-0xd01fffff]
[ 0.525256] bus: 03 index 2 mmio: [0x50000000-0x53ffffff]
[ 0.525258] bus: 03 index 3 io port: [0x00-0xffff]
[ 0.525260] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 0.525262] bus: 04 index 0 io port: [0x2400-0x24ff]
[ 0.525264] bus: 04 index 1 io port: [0x2800-0x28ff]
[ 0.525265] bus: 04 index 2 mmio: [0x50000000-0x53ffffff]
[ 0.525268] bus: 04 index 3 mmio: [0x54000000-0x57ffffff]
[ 0.525275] NET: Registered protocol family 2
[ 0.540049] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.540281] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.540637] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.540822] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.540824] TCP reno registered
[ 0.544066] NET: Registered protocol family 1
[ 0.544177] checking if image is initramfs... it is
[ 1.145202] Freeing initrd memory: 7369k freed
[ 1.145255] Simple Boot Flag at 0x36 set to 0x1
[ 1.145454] cpufreq: No nForce2 chipset.
[ 1.145610] audit: initializing netlink socket (disabled)
[ 1.145638] type=2000 audit(1248592211.145:1): initialized
[ 1.152674] highmem bounce pool size: 64 pages
[ 1.152680] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.154023] VFS: Disk quotas dquot_6.5.1
[ 1.154081] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.154689] fuse init (API version 7.10)
[ 1.154775] msgmni has been set to 1724
[ 1.154965] alg: No test for stdrng (krng)
[ 1.154980] io scheduler noop registered
[ 1.154982] io scheduler anticipatory registered
[ 1.154984] io scheduler deadline registered
[ 1.154997] io scheduler cfq registered (default)
[ 1.155010] pci 0000:00:02.0: Boot video device
[ 1.157312] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.157365] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.157405] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 1.157421] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.157435] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.157447] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.157531] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.157571] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.160284] ACPI: AC Adapter [AC0] (on-line)
[ 1.176857] ACPI: Battery Slot [BAT0] (battery present)
[ 1.176928] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.176930] ACPI: Power Button (FF) [PWRF]
[ 1.176976] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.177013] ACPI: Lid Switch [LID0]
[ 1.177053] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.177063] ACPI: Power Button (CM) [PWRB]
[ 1.177102] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.177105] ACPI: Sleep Button (CM) [SLPB]
[ 1.177704] ACPI: SSDT 3F6E7921, 0234 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.178032] ACPI: SSDT 3F6E76C6, 01D6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 1.178364] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.178389] processor ACPI_CPU:00: registered as cooling_device0
[ 1.178393] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.178745] ACPI: SSDT 3F6E7B55, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 1.179052] ACPI: SSDT 3F6E789C, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 1.179444] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.179463] processor ACPI_CPU:01: registered as cooling_device1
[ 1.179467] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.181236] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.181312] ACPI: Thermal Zone [TZ00] (27 C)
[ 1.181678] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.181753] ACPI: Thermal Zone [TZ01] (27 C)
[ 1.181812] isapnp: Scanning for PnP cards...
[ 1.535611] isapnp: No Plug & Play device found
[ 1.548232] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.549253] brd: module loaded
[ 1.549564] loop: module loaded
[ 1.549625] Fixed MDIO Bus: probed
[ 1.549631] PPP generic driver version 2.4.2
[ 1.549687] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.549715] Driver 'sd' needs updating - please use bus_type methods
[ 1.549724] Driver 'sr' needs updating - please use bus_type methods
[ 1.549796] ata_piix 0000:00:1f.1: version 2.12
[ 1.549808] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.549848] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.549932] scsi0 : ata_piix
[ 1.550015] scsi1 : ata_piix
[ 1.550547] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.550550] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.712494] ata1.00: ATAPI: Optiarc DVD RW AD-7560A, DX09, max UDMA/33
[ 1.728447] ata1.00: configured for UDMA/33
[ 1.728947] ata2: port disabled. ignoring.
[ 1.729865] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX09 PQ: 0 ANSI: 5
[ 1.735001] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.735004] Uniform CD-ROM driver Revision: 3.20
[ 1.735094] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.735134] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.735153] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.735157] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.888018] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.888075] scsi2 : ata_piix
[ 1.888135] scsi3 : ata_piix
[ 1.889054] ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 19
[ 1.889056] ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 19
[ 2.052442] ata3.00: ATA-7: ST98823AS, 3.06, max UDMA/133
[ 2.052445] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.068489] ata3.00: configured for UDMA/133
[ 2.235151] scsi 2:0:0:0: Direct-Access ATA ST98823AS 3.06 PQ: 0 ANSI: 5
[ 2.235244] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.235259] sd 2:0:0:0: [sda] Write Protect is off
[ 2.235262] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.235286] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.235345] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.235360] sd 2:0:0:0: [sda] Write Protect is off
[ 2.235362] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.235386] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.235389] sda: sda1 sda2 < sda5 >
[ 2.282459] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.282497] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.283140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.283160] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.283178] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.283181] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.283241] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.287135] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.287143] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.287156] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[ 2.300009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.300090] usb usb1: configuration #1 chosen from 1 choice
[ 2.300117] hub 1-0:1.0: USB hub found
[ 2.300124] hub 1-0:1.0: 8 ports detected
[ 2.300238] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.300254] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.300275] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.300281] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.300285] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.300324] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.300351] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 2.300424] usb usb2: configuration #1 chosen from 1 choice
[ 2.300448] hub 2-0:1.0: USB hub found
[ 2.300454] hub 2-0:1.0: 2 ports detected
[ 2.300537] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.300543] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.300547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.300586] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.300613] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 2.300683] usb usb3: configuration #1 chosen from 1 choice
[ 2.300707] hub 3-0:1.0: USB hub found
[ 2.300714] hub 3-0:1.0: 2 ports detected
[ 2.300796] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.300803] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.300806] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.300848] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.300883] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 2.300956] usb usb4: configuration #1 chosen from 1 choice
[ 2.300981] hub 4-0:1.0: USB hub found
[ 2.300987] hub 4-0:1.0: 2 ports detected
[ 2.301068] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.301074] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.301078] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.301118] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.301154] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 2.301238] usb usb5: configuration #1 chosen from 1 choice
[ 2.301261] hub 5-0:1.0: USB hub found
[ 2.301268] hub 5-0:1.0: 2 ports detected
[ 2.301387] usbcore: registered new interface driver libusual
[ 2.301418] usbcore: registered new interface driver usbserial
[ 2.301428] USB Serial support registered for generic
[ 2.301443] usbcore: registered new interface driver usbserial_generic
[ 2.301445] usbserial: USB Serial Driver core
[ 2.301491] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.306917] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.309019] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.309025] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.309029] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.309035] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.309037] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.312040] mice: PS/2 mouse device common for all mice
[ 2.332099] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.332131] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.332190] device-mapper: uevent: version 1.0.3
[ 2.332274] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 2.332352] device-mapper: multipath: version 1.0.5 loaded
[ 2.332355] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.332428] EISA: Probing bus 0 at eisa.0
[ 2.332435] Cannot allocate resource for EISA slot 1
[ 2.332437] Cannot allocate resource for EISA slot 2
[ 2.332464] EISA: Detected 0 cards.
[ 2.332584] cpuidle: using governor ladder
[ 2.332702] cpuidle: using governor menu
[ 2.333194] TCP cubic registered
[ 2.333285] NET: Registered protocol family 10
[ 2.333697] lo: Disabled Privacy Extensions
[ 2.334022] NET: Registered protocol family 17
[ 2.334040] Bluetooth: L2CAP ver 2.11
[ 2.334041] Bluetooth: L2CAP socket layer initialized
[ 2.334044] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.334046] Bluetooth: SCO socket layer initialized
[ 2.334080] Bluetooth: RFCOMM socket layer initialized
[ 2.334085] Bluetooth: RFCOMM TTY layer initialized
[ 2.334087] Bluetooth: RFCOMM ver 1.10
[ 2.334091] Marking TSC unstable due to TSC halts in idle
[ 2.334478] Using IPI No-Shortcut mode
[ 2.334544] registered taskstats version 1
[ 2.334656] Magic number: 1:317:168
[ 2.334687] acpi device:31: hash matches
[ 2.334745] rtc_cmos 00:07: setting system clock to 2009-07-26 07:10:13 UTC (1248592213)
[ 2.334749] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.334750] EDD information not available.
[ 2.335036] Freeing unused kernel memory: 532k freed
[ 2.335187] Write protecting the kernel text: 4128k
[ 2.335246] Write protecting the kernel read-only data: 1532k
[ 2.376075] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.526025] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.526052] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.528149] 8139too Fast Ethernet driver 0.9.28
[ 2.528186] 8139too 0000:03:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.530220] eth0: RealTek RTL8139 at 0x2000, 00:12:40:50:6e:dc, IRQ 16
[ 2.530222] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.543423] ohci1394 0000:03:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.596182] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[d0100800-d0100fff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 2.841017] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 2.960525] PM: Starting manual resume from disk
[ 2.960528] PM: Resume from partition 8:5
[ 2.960530] PM: Checking hibernation image.
[ 2.960737] PM: Resume from disk failed.
[ 2.987162] kjournald starting. Commit interval 5 seconds
[ 2.987171] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.052750] usb 3-1: configuration #1 chosen from 1 choice
[ 3.908153] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0012400000006edc]
[ 5.112081] usb 3-1: USB disconnect, address 2
[ 6.096058] usb 3-1: new low speed USB device using uhci_hcd and address 3
[ 6.304731] usb 3-1: configuration #1 chosen from 1 choice
[ 8.088082] usb 3-1: USB disconnect, address 3
[ 8.682022] udev: starting version 141
[ 8.808077] cfg80211: Calling CRDA to update world regulatory domain
[ 9.072058] usb 3-1: new low speed USB device using uhci_hcd and address 4
[ 9.186299] cfg80211: World regulatory domain updated:
[ 9.186302] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.186305] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.186307] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.186309] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.186312] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.186314] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.280951] usb 3-1: configuration #1 chosen from 1 choice
[ 9.552602] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.565980] yenta_cardbus 0000:03:09.0: CardBus bridge found [1961:5607]
[ 9.576626] sdhci: Secure Digital Host Controller Interface driver
[ 9.576629] sdhci: Copyright(c) Pierre Ossman
[ 9.589144] Linux agpgart interface v0.103
[ 9.592557] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 9.593549] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 9.597029] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 9.597747] intel_rng: FWH not detected
[ 9.663379] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input7
[ 9.668111] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.691501] usbcore: registered new interface driver hiddev
[ 9.693395] yenta_cardbus 0000:03:09.0: ISA IRQ mask 0x0c38, PCI irq 20
[ 9.693399] yenta_cardbus 0000:03:09.0: Socket status: 30000006
[ 9.693403] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #03 to #07
[ 9.693447] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 9.693450] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 9.693693] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
[ 9.693695] yenta_cardbus 0000:03:09.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 9.694113] sdhci-pci 0000:03:09.2: SDHCI controller found [1180:0822] (rev 17)
[ 9.694135] sdhci-pci 0000:03:09.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 9.697264] mmc0: SDHCI controller on PCI [0000:03:09.2] using PIO
[ 9.707958] input: USB U+P Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8
[ 9.717170] generic-usb 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [USB U+P Mouse] on usb-0000:00:1d.1-1/input0
[ 9.717191] usbcore: registered new interface driver usbhid
[ 9.717213] usbhid: v2.6:USB HID core driver
[ 9.722584] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 9.722587] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 9.722691] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.722705] iwl3945 0000:02:00.0: setting latency timer to 64
[ 9.726062] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 9.736241] iwl3945 0000:02:00.0: irq 2302 for MSI/MSI-X
[ 9.777496] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 9.778450] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.862437] iTCO_vendor_support: vendor-support=0
[ 9.919275] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 9.919463] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 9.919544] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.035302] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.035387] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.142510] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 10.144474] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 10.145333] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 10.146011] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 10.146880] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 10.293061] lp: driver loaded but no devices found
[ 10.361544] Adding 2980016k swap on /dev/sda5. Priority:-1 extents:1 across:2980016k
[ 10.500049] Clocksource tsc unstable (delta = -64294602 ns)
[ 10.897046] EXT3 FS on sda1, internal journal
[ 11.900287] type=1505 audit(1248592223.062:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2015
[ 11.912085] iwl3945: Radio Frequency Kill Switch is On:
[ 11.912087] Kill switch must be turned off for wireless networking to work.
[ 11.944407] type=1505 audit(1248592223.106:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2019
[ 11.944495] type=1505 audit(1248592223.106:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2019
[ 11.944533] type=1505 audit(1248592223.106:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2019
[ 11.944570] type=1505 audit(1248592223.106:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2019
[ 12.065996] type=1505 audit(1248592223.230:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2025
[ 12.066144] type=1505 audit(1248592223.230:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2025
[ 12.092104] type=1505 audit(1248592223.254:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2029
[ 13.856876] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.856879] Bluetooth: BNEP filters: protocol multicast
[ 13.885064] Bridge firewalling registered
[ 14.536122] usb 3-1: USB disconnect, address 4
[ 14.980272] ppdev: user-space parallel port driver
[ 15.520019] usb 3-1: new low speed USB device using uhci_hcd and address 5
[ 15.734998] usb 3-1: configuration #1 chosen from 1 choice
[ 15.750927] input: USB U+P Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
[ 15.757050] generic-usb 0003:1C4F:0003.0002: input,hidraw0: USB HID v1.10 Mouse [USB U+P Mouse] on usb-0000:00:1d.1-1/input0
[ 16.690182] [drm] Initialized drm 1.1.0 20060810
[ 16.695539] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.695544] pci 0000:00:02.0: setting latency timer to 64
[ 16.695668] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 16.698737] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 16.698761] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 17.994637] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 18.835295] eth0: link down
[ 18.835539] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.836219] iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-1.ucode
[ 18.900692] iwl3945: Radio disabled by HW RF Kill switch
[ 23.780738] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 26.157912] [drm:i915_getparam] *ERROR* Unknown parameter 6
[ 26.891860] Registered led device: iwl-phy0:radio
[ 26.891879] Registered led device: iwl-phy0:assoc
[ 26.891933] Registered led device: iwl-phy0:RX
[ 26.891949] Registered led device: iwl-phy0:TX
[ 26.903065] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 84.326392] wlan0: authenticate with AP 00:1c:f0:3e:7d:b1
[ 84.328484] wlan0: authenticated
[ 84.328491] wlan0: associate with AP 00:1c:f0:3e:7d:b1
[ 84.332623] wlan0: RX AssocResp from 00:1c:f0:3e:7d:b1 (capab=0x431 status=0 aid=1)
[ 84.332628] wlan0: associated
[ 84.339416] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 94.700016] wlan0: no IPv6 routers present
[ 216.217713] usb 3-1: input irq status -75 received
You received this question notification because you are a member of UF
Unanswered Posts Team, which is an answer contact for Ubuntu.
