yade-users team mailing list archive

[Jan Stránský <question223478@xxxxxxxxxxxxxxxxxxxxx>]

Question #223478 on Yade changed:
https://answers.launchpad.net/yade/+question/223478

    Status: Open => Answered

Jan Stránský proposed the following answer:
Hello Majid,

we are on the right way :-) now the problem is that you have incompatible
functors, see [1]. You used Ig2_Wall_Sphere_ScGeom (so ScGeom), but then
Law2_L3Geom_FrictPhys_ElPerfPl (law for L3Geom). To make it work properly
you will need to use Law2_ScGeom_Something...

To tell you correct answer, we will need to see the compete sript (i.e.
what materials you are using). So please attach the whole script and
hopefully we will converge to the solution :-)
Jan

[1] https://yade-dem.org/doc/user.html#functors-choice

2013/3/7 Majid Ashraf <question223478@xxxxxxxxxxxxxxxxxxxxx>

> Question #223478 on Yade changed:
> https://answers.launchpad.net/yade/+question/223478
>
>     Status: Answered => Open
>
> Majid Ashraf is still having a problem:
> Hey Jan,
>               I tried incorporating the Aabb for wall in the insertion
> collider as you advised but now i am getting this when i run the
> simulation.
>
> FATAL /build/buildd/yade-0.70.0/pkg/common/InteractionLoop.cpp:156 action:
> None of given Law2 functors can handle interaction #0+1, types
> geom:ScGeom=1 and phys:FrictPhys=4 (LawDispatcher::getFunctor2D returned
> empty functor)
>
>
> Thanks.
>
> Best Regards,
>
> Majid
>
>
> On Tue, Mar 5, 2013 at 2:45 PM, Jan Stránský <
> question223478@xxxxxxxxxxxxxxxxxxxxx> wrote:
>
> > Question #223478 on Yade changed:
> > https://answers.launchpad.net/yade/+question/223478
> >
> >     Status: Open => Answered
> >
> > Jan Stránský proposed the following answer:
> > Hello Majid,
> >
> > thanks for the info. The problems is, that there is no bounding
> dispatcher
> > for the wall, so it is not considered by colision detector. Modify you
> > InsrtionSortCollider to this:
> >
> > InsertionSortCollider([Bo1_Sphere_Aabb(),Bo1_Wall_Aabb()]),
> >
> > now it should work.
> > in case of any other question, don't hesitate to ask :-)
> > cheers
> > Jan
> >
> >
> > 2013/3/5 Majid Ashraf <question223478@xxxxxxxxxxxxxxxxxxxxx>
> >
> > > Question #223478 on Yade changed:
> > > https://answers.launchpad.net/yade/+question/223478
> > >
> > >     Status: Answered => Open
> > >
> > > Majid Ashraf is still having a problem:
> > > Hello Jan,
> > >               Thanks for the thumbs up on my problem. I am using Yade
> > > 0.70.0 and my friend compiled it for me. I wrote the whole syntax in
> > > IPython and then used yade to recall that using .py extension. I am not
> > > getting any syntax errors but the ball is passing through the wall
> > instead
> > > of bouncing. I have also attached a picture which will give you a
> better
> > > idea of what's going on.
> > >
> > > Best Regards,
> > >
> > > Majid
> > >
> > >
> > > On Tue, Mar 5, 2013 at 1:55 PM, Jan Stránský <
> > > question223478@xxxxxxxxxxxxxxxxxxxxx> wrote:
> > >
> > > > Your question #223478 on Yade changed:
> > > > https://answers.launchpad.net/yade/+question/223478
> > > >
> > > >     Status: Open => Answered
> > > >
> > > > Jan Stránský proposed the following answer:
> > > > Hello Majid,
> > > >
> > > > from what you wrote, it is very hard to say what is the reason.. To
> > help
> > > > you, we will need some more information. Firstly, what version of
> Yade
> > > you
> > > > are using and how you compiled it. Then how you run your code (from
> > > script
> > > > or from IPython). Also why it is not working - do you get some errors
> > or
> > > > the program does something different from what you want?
> > > >
> > > > so please provide us with these information and hopefully we will be
> > able
> > > > to help you :-)
> > > > Best regards
> > > > Jan
> > > >
> > > >
> > > > I run your script without any errors..
> > > >
> > > >
> > > > >  This is what i am using.
> > > > >
> > > > > > O.bodies.append([
> > > > > >
> > > > >
> > > >
> > >
> >
> utils.wall(position=Vector3(0,1,2),axis=2,sense=1,color=(1,0,0),material=RpmMat,mask=1),
> > > > > > #utils._commonBodySetup(),
> > > > > > utils.sphere((0,0,2),.5)
> > > > > > ])
> > > > > > O.engines=[
> > > > > >     ForceResetter(),
> > > > > >    InsertionSortCollider([Bo1_Sphere_Aabb()]),
> > > > > > InteractionLoop(
> > > > > > [Ig2_Wall_Sphere_ScGeom()],
> > > > > > [Ip2_FrictMat_FrictMat_FrictPhys()], # collision "physics"
> > > > > > [Law2_L3Geom_FrictPhys_ElPerfPl()]   # contact law -- apply
> forces
> > > > > > ),
> > > > > > GravityEngine(gravity=(0,0,-9.81)),
> > > > > >    # damping: numerical dissipation of energy
> > > > > >    NewtonIntegrator(damping=0.1)
> > > > > > ]
> > > > > >
> > > > > > # set timestep to a fraction of the critical timestep
> > > > > > # the fraction is very small, so that the simulation is not too
> > fast
> > > > > > # and the motion can be observed
> > > > > > O.dt=.5e-4*utils.PWaveTimeStep()
> > > > > >
> > > > > > # save the simulation, so that it can be reloaded later, for
> > > > > > experimentation
> > > > > > O.saveTmp()
> > > > > >
> > > > > > Can anyone please help me out in this regard? I will really
> > > appreciate
> > > > > your
> > > > > > concern. Thanks.
> > > > > >
> > > > > > Best Regards,
> > > > > >
> > > > > > Majid
> > > > >
> > > > >
> > > > > --
> > > > > You received this question notification because you are a member of
> > > > > yade-users, which is an answer contact for Yade.
> > > > >
> > > > > _______________________________________________
> > > > > Mailing list: https://launchpad.net/~yade-users
> > > > > Post to     : yade-users@xxxxxxxxxxxxxxxxxxx
> > > > > Unsubscribe : https://launchpad.net/~yade-users
> > > > > More help   : https://help.launchpad.net/ListHelp
> > > > >
> > > >
> > > > --
> > > > If this answers your question, please go to the following page to let
> > us
> > > > know that it is solved:
> > > >
> > https://answers.launchpad.net/yade/+question/223478/+confirm?answer_id=0
> > > >
> > > > If you still need help, you can reply to this email or go to the
> > > > following page to enter your feedback:
> > > > https://answers.launchpad.net/yade/+question/223478
> > > >
> > > > You received this question notification because you asked the
> question.
> > > >
> > >
> > > --
> > > You received this question notification because you are a member of
> > > yade-users, which is an answer contact for Yade.
> > >
> > > _______________________________________________
> > > Mailing list: https://launchpad.net/~yade-users
> > > Post to     : yade-users@xxxxxxxxxxxxxxxxxxx
> > > Unsubscribe : https://launchpad.net/~yade-users
> > > More help   : https://help.launchpad.net/ListHelp
> > >
> >
> > --
> > You received this question notification because you are a member of
> > yade-users, which is an answer contact for Yade.
> >
> > _______________________________________________
> > Mailing list: https://launchpad.net/~yade-users
> > Post to     : yade-users@xxxxxxxxxxxxxxxxxxx
> > Unsubscribe : https://launchpad.net/~yade-users
> > More help   : https://help.launchpad.net/ListHelp
> >
>
> --
> You received this question notification because you are a member of
> yade-users, which is an answer contact for Yade.
>
> _______________________________________________
> Mailing list: https://launchpad.net/~yade-users
> Post to     : yade-users@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~yade-users
> More help   : https://help.launchpad.net/ListHelp
>

-- 
You received this question notification because you are a member of
yade-users, which is an answer contact for Yade.