yade-users team mailing list archive

[Zhicheng Gao <question697336@xxxxxxxxxxxxxxxxxxxxx>]

Question #697336 on Yade changed:
https://answers.launchpad.net/yade/+question/697336

    Status: Answered => Open

Zhicheng Gao is still having a problem:
Dear Robert,
According to your suggestion, I have modified the code, but there is an error

 ArgumentError: Python argument types in
    None.None(PeriTriaxController, NoneType)
did not match C++ signature:
    None(PeriTriaxController {lvalue}, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >)
Compacted state saved porosity 0.366658082769

the code is followed:
from __future__ import print_function
from yade import pack, qt, plot
from math import *

nRead=readParamsFromTable(
        ## model parameters
        num_spheres=100,
        targetPorosity= .387,
        confiningPressure=-100000,
        ## material parameters
        compFricDegree=15,#contact friction during the confining phase
        finalFricDegree=30,#contact friction during the deviatoric loading
        young=2e8,
        poisson=.2,
        density=2600,
        alphaKr=7.5,
        alphaKtw=0,
 competaRoll=.22,
        finaletaRoll=.22,
        etaTwist=0,
        normalCohesion=0,
        shearCohesion=0,
        ## fluid parameters
        fluidDensity=1000,
        dynamicViscosity=.001,
        ## control parameters
        damp=0,
        stabilityThreshold=.001,
        ## output specifications
        filename='suffusion',
        unknowOk=True
)

from yade.params.table import *

O.periodic=True
O.cell.hSize=Matrix3(.001,0,0, 0,.001,0, 0,0,.001)
# create materials for spheres
#shear strength is the sum of friction and adhesion, so the momentRotationLaw=True
O.materials.append(CohFrictMat(alphaKr=alphaKr,alphaKtw=alphaKtw,density=density,etaRoll=competaRoll,etaTwist=etaTwist,frictionAngle=radians(compFricDegree),momentRotationLaw=True,normalCohesion=normalCohesion,poisson=poisson,shearCohesion=shearCohesion,young=young,label='spheres'))

# generate particles packing
sp=pack.SpherePack()
sp.makeCloud((0,0,0),(.001,.001,.001),psdSizes=[0.00008,0.000125,0.0001592,0.0002003,0.0003153,0.000399,0.000502,0.0005743],psdCumm=[0.0,0.00628,0.0565,0.198,0.721,0.915,0.991,1.0],num=num_spheres)
sp.toSimulation(material='spheres')

O.engines=[
        ForceResetter(),
        InsertionSortCollider([Bo1_Sphere_Aabb()]),
        InteractionLoop(
            [Ig2_Sphere_Sphere_ScGeom6D()],
            [Ip2_CohFrictMat_CohFrictMat_CohFrictPhys(label='contact',setCohesionNow=False,setCohesionOnNewContacts=False)],
            [Law2_ScGeom6D_CohFrictPhys_CohesionMoment(useIncrementalForm=True,always_use_moment_law=True)],
 ),
        PeriodicFlowEngine(dead=1,label="flow"),#introduced as a dead engine for the moment, see 2nd section
        GlobalStiffnessTimeStepper(active=1,timeStepUpdateInterval=100,timestepSafetyCoefficient=0.8),
        PeriTriaxController(label='triax',
            # specify target values and whether they are strains or stresses
            goal=(confiningPressure,confiningPressure,confiningPressure), stressMask=7,
            # type of servo-control, the strain rate isn't determined, it shloud check the unbalanced force
            dynCell=True,maxStrainRate=(10,10,10),
            # wait until the unbalanced force goes below this value
            maxUnbalanced=stabilityThreshold,relStressTol=1e-3,
            doneHook='compactionFinished()'
            ),
        NewtonIntegrator(damping=0)
]
qt.View()
import sys
def compactionFinished():
        #check the current porosity
        # if the current porosity is lager than target Porosity and comFricDegree is lager than 10,
        # then we decrease friction value and apply it to all the bodies and contacts,
        # else we decrease rolling friction value.
 global compFricDegree, competaRoll
        if porosity()>targetPorosity and compFricDegree>5:
            # we decrease friction value and apply it to all the bodies and contacts
            compFricDegree = 0.95*compFricDegree
            setContactFriction(radians(compFricDegree))
            print('Friction:', compFricDegree,'porosity:', porosity())
            # python syntax, make each step printout
            sys.stdout.flush()
        elif porosity()>targetPorosity:
            # we decrease rolling fiction value and apply it to all the bodies and contacts
     competaRoll=0.95*competaRoll
            for b in O.bodies:
                b.mat.etaRoll=competaRoll
            for i in O.interactions:
                i.phys.etaRoll=competaRoll
            print('Rollingfriction:', b.mat.etaRoll, 'porosity:', porosity())
            sys.stdout.flush()
        else:
     # after sample preparation, save the state
            O.save('compactedState'+filename+'.yade.gz')
            print('Compacted state saved', 'porosity', porosity())
            # next time, called python command
            triax.doneHook=None
            O.pause()
O.run()

-- 
You received this question notification because your team yade-users is
an answer contact for Yade.