← Back to team overview

yahoo-eng-team team mailing list archive

  1. yahoo-eng-team team
  2. Mailing list archive
  3. Message #25030

[Bug 1398495] [NEW] Unable to upload image to glance

  Thread Previous • Date Previous • • Thread Next 
Public bug reported:

Hello everyone.  Details of the problem experienced have been documented
at the link below.  I'm not sure if this is an error with Glance or with
Keystone.

https://ask.openstack.org/en/questions/54963/edit/

I installed and configured glance as per the install instructions on the
OpenStack website and received the following error when attempting to
upload a cirros image:

    [root@controller]# source ~/openstack-tools/admin-openrc.sh 
    [root@controller]# glance image-create --name "cirros-0.3.3-x86_64" --file cirros-0.3.3-x86_64-disk.img --disk-format qcow2 --container-format bare --is-public True --progress
    [=============================>] 100%
    Request returned failure status.
    Invalid OpenStack Identity credentials.


Keystone Logs:

    2014-12-02 07:52:16.300 11159 INFO eventlet.wsgi.server [-] 192.168.122.11 - - [02/Dec/2014 07:52:16] "POST /v2.0/tokens HTTP/1.1" 200 1250 0.084692
    127.0.0.1 - - [02/Dec/2014 07:52:16] code 400, message Bad request version ('b\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0')
    127.0.0.1 - - [02/Dec/2014 07:52:16] "^V^C^A^A^\^A^@^A^X^C^C<DA>^M<FA><91><92>`^V<94><97>^Z^TPߕ<B9><A4><A8>^E<D3>G;<FA><AC>5^X"<9B><88> b^@^@<82><C0>0<C0>,<C0>(
    <C0>$<C0>^T<C0>" 400 -
    127.0.0.1 - - [02/Dec/2014 07:52:16] code 400, message Bad request syntax ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\xc7\xc2s\xdb\x97w\x94t\x84\xa4\xca.\x9c\x18\xa9\xd7\xd1\xf2\x94\xfb\xad\x1c\x04\xbc\x07\xcf!\xda5Z.\xa7\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0')
    127.0.0.1 - - [02/Dec/2014 07:52:16] "^V^C^A^A^\^A^@^A^X^C^C<C7><C2>sۗw<94>t<84><A4><CA>.<9C>^X<A9><D7><D1><F2><94><FB><AD>^\^D<BC>^G<CF>!<DA>5Z.<A7>^@^@<82><C0>0
    <C0>,<C0>(<C0>$<C0>^T<C0>" 400 -
    127.0.0.1 - - [02/Dec/2014 07:52:17] code 400, message Bad HTTP/0.9 request type ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\xdf\xa1\x88\xb5)\x95\xd8L')
    127.0.0.1 - - [02/Dec/2014 07:52:17] "^V^C^A^A^\^A^@^A^X^C^Cߡ<88><B5>)<95><D8>L 0<8E><B6>ܬqK<98><90><D8>^N<DF>F<CA>ܯ岼E|<B8>B^@^@<82><C0>0<C0>,<C0>(<C0>$<C0>^T
    <C0>" 400 -
    127.0.0.1 - - [02/Dec/2014 07:52:19] code 400, message Bad request syntax ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\x89\xc8\xa5\xea!\x8f\xad\x9d\xb1\xf86,X\xf1IC\xe1\x07\x95\x87Y\xa5\x8f\x05\xf9!d\xd97\x7f\xc1\xdf\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0')
    127.0.0.1 - - [02/Dec/2014 07:52:19] "^V^C^A^A^\^A^@^A^X^C^C<89>ȥ<EA>!<8F><AD><9D><B1><F8>6,X<F1>IC<E1>^G<95><87>Y<A5><8F>^E<F9>!d<D9>7^?<C1><DF>^@^@<82><C0>0<C0>,<C0>(<C0>$<C0>^T<C0>" 400 -
    2014-12-02 07:53:20.008 11159 INFO eventlet.wsgi.server [-] 192.168.122.11 - - [02/Dec/2014 07:53:20] "POST /v2.0/tokens HTTP/1.1" 200 1250 0.083278
    127.0.0.1 - - [02/Dec/2014 07:53:20] code 400, message Bad request syntax ("\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\x9e\xc4]-w\xb6\xad\xf1\x9a\x17\x1a'{%\xf9:H5[\xa3P\xea\xc8\x1a\x8b\x12\xee.y\x8f:\xc3\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0")
    127.0.0.1 - - [02/Dec/2014 07:53:20] "^V^C^A^A^\^A^@^A^X^C^C<9E><C4>]-w<B6><AD><F1><9A>^W^Z'{%<F9>:H5[<A3>P<EA><C8>^Z<8B>^R<EE>.y<8F>:<C3>^@^@<82><C0>0<C0>,<C0>(
    <C0>$<C0>^T<C0>" 400 -
    127.0.0.1 - - [02/Dec/2014 07:53:20] code 400, message Bad HTTP/0.9 request type ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\xbb\xa3v\x88bu\x07\xe9\x9dg>\x8e\xff\xa8p\xc0')
    127.0.0.1 - - [02/Dec/2014 07:53:20] "^V^C^A^A^\^A^@^A^X^C^C<BB><A3>v<88>bu^G<E9><9D>g><8E><FF><A8>p<C0>^K=<D8>]^1<F1><BA><A7>" 400 -
    127.0.0.1 - - [02/Dec/2014 07:53:21] code 400, message Bad HTTP/0.9 request type ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03')
    127.0.0.1 - - [02/Dec/2014 07:53:21] "^V^C^A^A^\^A^@^A^X^C^C <B7>Iv<DB><D3>@<B2>~y<B7><FF>6<94>Ӯ<BF>8<E0>[I<80>F9<8C>^\<95>k" 400 -
    127.0.0.1 - - [02/Dec/2014 07:53:23] code 400, message Bad request syntax ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\x12\xc5(\xcbk\x05\x95\xd9\xae\xb1\xfbA\xba\x14bw\xc5>\xf2\xfes\x9e_\x97Rz\x1b\x8bA\xf6d\xa7\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0')
    127.0.0.1 - - [02/Dec/2014 07:53:23] "^V^C^A^A^\^A^@^A^X^C^C^R<C5>(<CB>k^E<95>ٮ<B1><FB>A<BA>^Tbw<C5>><F2><FE>s<9E>_<97>RzESC<8B>A<F6>d<A7>^@^@<82><C0>0<C0>,<C0>(
    <C0>$<C0>^T<C0>" 400 -


glance-api logs:

    2014-12-02 07:51:19.287 20032 INFO keystoneclient.middleware.auth_token [-] Starting keystone auth_token middleware
    2014-12-02 07:51:19.289 20032 INFO keystoneclient.middleware.auth_token [-] Using /tmp/keystone-signing-bRRmQx as cache directory for signing certificate
    2014-12-02 07:51:19.290 20032 INFO glance.wsgi.server [-] Starting 1 workers
    2014-12-02 07:51:19.293 20032 INFO glance.wsgi.server [-] Started child 20039
    2014-12-02 07:51:19.296 20039 INFO glance.wsgi.server [-] (20039) wsgi starting up on http://0.0.0.0:9292/
    2014-12-02 07:52:16.322 20039 INFO urllib3.connectionpool [-] Starting new HTTPS connection (1): 127.0.0.1
    2014-12-02 07:52:16.390 20039 WARNING keystoneclient.middleware.auth_token [-] Retrying on HTTP connection exception: [Errno 1] _ssl.c:510: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
    2014-12-02 07:52:16.892 20039 INFO urllib3.connectionpool [-] Starting new HTTPS connection (1): 127.0.0.1
    2014-12-02 07:52:16.909 20039 WARNING keystoneclient.middleware.auth_token [-] Retrying on HTTP connection exception: [Errno 1] _ssl.c:510: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
    2014-12-02 07:52:17.911 20039 INFO urllib3.connectionpool [-] Starting new HTTPS connection (1): 127.0.0.1
    2014-12-02 07:52:17.936 20039 WARNING keystoneclient.middleware.auth_token [-] Retrying on HTTP connection exception: [Errno 1] _ssl.c:510: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
    2014-12-02 07:52:19.939 20039 INFO urllib3.connectionpool [-] Starting new HTTPS connection (1): 127.0.0.1
    2014-12-02 07:52:19.964 20039 ERROR keystoneclient.middleware.auth_token [-] HTTP connection exception: [Errno 1] _ssl.c:510: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
    2014-12-02 07:52:19.964 20039 WARNING keystoneclient.middleware.auth_token [-] Authorization failed for token
    2014-12-02 07:52:19.964 20039 INFO keystoneclient.middleware.auth_token [-] Invalid user token - deferring reject downstream
    2014-12-02 07:52:19.972 20039 INFO glance.wsgi.server [-] 192.168.122.11 - - [02/Dec/2014 07:52:19] "POST /v1/images HTTP/1.1" 401 381 3.662323

I was caugth offguard by the SSL errors as I thought the authentication
was supposed to take place over HTTP.  The documentation explicitely
states in a note in the glance install section that the following lines
can be commented out in glance-api.conf and glance-registry.conf:

    auth_host = 127.0.0.1
    auth_port = 35357
    auth_protocol = http

It's stated that the auth_uri and identiry_uri replace the lines above.
Just for grins, I uncommented the auth_protocol line and was
subsequently able to create a cirros image with glance.

    [root@controller]# grep -A 7 keystone_authtoken glance-*
    glance-api.conf:[keystone_authtoken]
    glance-api.conf-#auth_host = 127.0.0.1
    glance-api.conf-#auth_port = 35357
    glance-api.conf-auth_protocol = http
    glance-api.conf-auth_uri = http://controller:5000/v2.0
    glance-api.conf-identity_uri = http://controller:35357
    glance-api.conf-admin_tenant_name = service
    glance-api.conf-admin_user = glance
    --
    glance-registry.conf:[keystone_authtoken]
    glance-registry.conf-#auth_host = 127.0.0.1
    glance-registry.conf-#auth_port = 35357
    glance-registry.conf-auth_protocol = http
    glance-registry.conf-auth_uri = http://controller:5000/v2.0
    glance-registry.conf-identity_uri = http://controller:35357
    glance-registry.conf-admin_tenant_name = service
    glance-registry.conf-admin_user = glance
    
    [root@controller]# !390
    service glance-registry restart ; service glance-api restart
    glance-registry stop/waiting
    glance-registry start/running, process 20377
    glance-api stop/waiting
    glance-api start/running, process 20387
    
    
    [root@controller]# cd /tmp/images/
    [root@controller]# !395
    glance image-create --name "cirros-0.3.3-x86_64" --file cirros-0.3.3-x86_64-disk.img --disk-format qcow2 --container-format bare --is-public True --progress
    [=============================>] 100%
    +------------------+--------------------------------------+
    | Property         | Value                                |
    +------------------+--------------------------------------+
    | checksum         | 133eae9fb1c98f45894a4e60d8736619     |
    | container_format | bare                                 |
    | created_at       | 2014-12-02T15:06:32                  |
    | deleted          | False                                |
    | deleted_at       | None                                 |
    | disk_format      | qcow2                                |
    | id               | 2d90376a-68e0-467b-afd6-7cb277e5f0cf |
    | is_public        | True                                 |
    | min_disk         | 0                                    |
    | min_ram          | 0                                    |
    | name             | cirros-0.3.3-x86_64                  |
    | owner            | None                                 |
    | protected        | False                                |
    | size             | 13200896                             |
    | status           | active                               |
    | updated_at       | 2014-12-02T15:06:33                  |
    | virtual_size     | None                                 |
    +------------------+--------------------------------------+
    [root@controller]# 

I'm not sure if this is a (known) bug in glance/keystone or if the
documentation is incorrect.  Glance is now working for me, just not sure
whose attention is needed here or if this is a known bug.  Thanks in
advance for any assistance.

** Affects: glance
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of Yahoo!
Engineering Team, which is subscribed to Glance.
https://bugs.launchpad.net/bugs/1398495

Title:
  Unable to upload image to glance

Status in OpenStack Image Registry and Delivery Service (Glance):
  New

Bug description:
  Hello everyone.  Details of the problem experienced have been
  documented at the link below.  I'm not sure if this is an error with
  Glance or with Keystone.

  https://ask.openstack.org/en/questions/54963/edit/

  I installed and configured glance as per the install instructions on
  the OpenStack website and received the following error when attempting
  to upload a cirros image:

      [root@controller]# source ~/openstack-tools/admin-openrc.sh 
      [root@controller]# glance image-create --name "cirros-0.3.3-x86_64" --file cirros-0.3.3-x86_64-disk.img --disk-format qcow2 --container-format bare --is-public True --progress
      [=============================>] 100%
      Request returned failure status.
      Invalid OpenStack Identity credentials.

  
  Keystone Logs:

      2014-12-02 07:52:16.300 11159 INFO eventlet.wsgi.server [-] 192.168.122.11 - - [02/Dec/2014 07:52:16] "POST /v2.0/tokens HTTP/1.1" 200 1250 0.084692
      127.0.0.1 - - [02/Dec/2014 07:52:16] code 400, message Bad request version ('b\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0')
      127.0.0.1 - - [02/Dec/2014 07:52:16] "^V^C^A^A^\^A^@^A^X^C^C<DA>^M<FA><91><92>`^V<94><97>^Z^TPߕ<B9><A4><A8>^E<D3>G;<FA><AC>5^X"<9B><88> b^@^@<82><C0>0<C0>,<C0>(
      <C0>$<C0>^T<C0>" 400 -
      127.0.0.1 - - [02/Dec/2014 07:52:16] code 400, message Bad request syntax ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\xc7\xc2s\xdb\x97w\x94t\x84\xa4\xca.\x9c\x18\xa9\xd7\xd1\xf2\x94\xfb\xad\x1c\x04\xbc\x07\xcf!\xda5Z.\xa7\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0')
      127.0.0.1 - - [02/Dec/2014 07:52:16] "^V^C^A^A^\^A^@^A^X^C^C<C7><C2>sۗw<94>t<84><A4><CA>.<9C>^X<A9><D7><D1><F2><94><FB><AD>^\^D<BC>^G<CF>!<DA>5Z.<A7>^@^@<82><C0>0
      <C0>,<C0>(<C0>$<C0>^T<C0>" 400 -
      127.0.0.1 - - [02/Dec/2014 07:52:17] code 400, message Bad HTTP/0.9 request type ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\xdf\xa1\x88\xb5)\x95\xd8L')
      127.0.0.1 - - [02/Dec/2014 07:52:17] "^V^C^A^A^\^A^@^A^X^C^Cߡ<88><B5>)<95><D8>L 0<8E><B6>ܬqK<98><90><D8>^N<DF>F<CA>ܯ岼E|<B8>B^@^@<82><C0>0<C0>,<C0>(<C0>$<C0>^T
      <C0>" 400 -
      127.0.0.1 - - [02/Dec/2014 07:52:19] code 400, message Bad request syntax ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\x89\xc8\xa5\xea!\x8f\xad\x9d\xb1\xf86,X\xf1IC\xe1\x07\x95\x87Y\xa5\x8f\x05\xf9!d\xd97\x7f\xc1\xdf\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0')
      127.0.0.1 - - [02/Dec/2014 07:52:19] "^V^C^A^A^\^A^@^A^X^C^C<89>ȥ<EA>!<8F><AD><9D><B1><F8>6,X<F1>IC<E1>^G<95><87>Y<A5><8F>^E<F9>!d<D9>7^?<C1><DF>^@^@<82><C0>0<C0>,<C0>(<C0>$<C0>^T<C0>" 400 -
      2014-12-02 07:53:20.008 11159 INFO eventlet.wsgi.server [-] 192.168.122.11 - - [02/Dec/2014 07:53:20] "POST /v2.0/tokens HTTP/1.1" 200 1250 0.083278
      127.0.0.1 - - [02/Dec/2014 07:53:20] code 400, message Bad request syntax ("\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\x9e\xc4]-w\xb6\xad\xf1\x9a\x17\x1a'{%\xf9:H5[\xa3P\xea\xc8\x1a\x8b\x12\xee.y\x8f:\xc3\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0")
      127.0.0.1 - - [02/Dec/2014 07:53:20] "^V^C^A^A^\^A^@^A^X^C^C<9E><C4>]-w<B6><AD><F1><9A>^W^Z'{%<F9>:H5[<A3>P<EA><C8>^Z<8B>^R<EE>.y<8F>:<C3>^@^@<82><C0>0<C0>,<C0>(
      <C0>$<C0>^T<C0>" 400 -
      127.0.0.1 - - [02/Dec/2014 07:53:20] code 400, message Bad HTTP/0.9 request type ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\xbb\xa3v\x88bu\x07\xe9\x9dg>\x8e\xff\xa8p\xc0')
      127.0.0.1 - - [02/Dec/2014 07:53:20] "^V^C^A^A^\^A^@^A^X^C^C<BB><A3>v<88>bu^G<E9><9D>g><8E><FF><A8>p<C0>^K=<D8>]^1<F1><BA><A7>" 400 -
      127.0.0.1 - - [02/Dec/2014 07:53:21] code 400, message Bad HTTP/0.9 request type ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03')
      127.0.0.1 - - [02/Dec/2014 07:53:21] "^V^C^A^A^\^A^@^A^X^C^C <B7>Iv<DB><D3>@<B2>~y<B7><FF>6<94>Ӯ<BF>8<E0>[I<80>F9<8C>^\<95>k" 400 -
      127.0.0.1 - - [02/Dec/2014 07:53:23] code 400, message Bad request syntax ('\x16\x03\x01\x01\x1c\x01\x00\x01\x18\x03\x03\x12\xc5(\xcbk\x05\x95\xd9\xae\xb1\xfbA\xba\x14bw\xc5>\xf2\xfes\x9e_\x97Rz\x1b\x8bA\xf6d\xa7\x00\x00\x82\xc00\xc0,\xc0(\xc0$\xc0\x14\xc0')
      127.0.0.1 - - [02/Dec/2014 07:53:23] "^V^C^A^A^\^A^@^A^X^C^C^R<C5>(<CB>k^E<95>ٮ<B1><FB>A<BA>^Tbw<C5>><F2><FE>s<9E>_<97>RzESC<8B>A<F6>d<A7>^@^@<82><C0>0<C0>,<C0>(
      <C0>$<C0>^T<C0>" 400 -

  
  glance-api logs:

      2014-12-02 07:51:19.287 20032 INFO keystoneclient.middleware.auth_token [-] Starting keystone auth_token middleware
      2014-12-02 07:51:19.289 20032 INFO keystoneclient.middleware.auth_token [-] Using /tmp/keystone-signing-bRRmQx as cache directory for signing certificate
      2014-12-02 07:51:19.290 20032 INFO glance.wsgi.server [-] Starting 1 workers
      2014-12-02 07:51:19.293 20032 INFO glance.wsgi.server [-] Started child 20039
      2014-12-02 07:51:19.296 20039 INFO glance.wsgi.server [-] (20039) wsgi starting up on http://0.0.0.0:9292/
      2014-12-02 07:52:16.322 20039 INFO urllib3.connectionpool [-] Starting new HTTPS connection (1): 127.0.0.1
      2014-12-02 07:52:16.390 20039 WARNING keystoneclient.middleware.auth_token [-] Retrying on HTTP connection exception: [Errno 1] _ssl.c:510: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
      2014-12-02 07:52:16.892 20039 INFO urllib3.connectionpool [-] Starting new HTTPS connection (1): 127.0.0.1
      2014-12-02 07:52:16.909 20039 WARNING keystoneclient.middleware.auth_token [-] Retrying on HTTP connection exception: [Errno 1] _ssl.c:510: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
      2014-12-02 07:52:17.911 20039 INFO urllib3.connectionpool [-] Starting new HTTPS connection (1): 127.0.0.1
      2014-12-02 07:52:17.936 20039 WARNING keystoneclient.middleware.auth_token [-] Retrying on HTTP connection exception: [Errno 1] _ssl.c:510: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
      2014-12-02 07:52:19.939 20039 INFO urllib3.connectionpool [-] Starting new HTTPS connection (1): 127.0.0.1
      2014-12-02 07:52:19.964 20039 ERROR keystoneclient.middleware.auth_token [-] HTTP connection exception: [Errno 1] _ssl.c:510: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol
      2014-12-02 07:52:19.964 20039 WARNING keystoneclient.middleware.auth_token [-] Authorization failed for token
      2014-12-02 07:52:19.964 20039 INFO keystoneclient.middleware.auth_token [-] Invalid user token - deferring reject downstream
      2014-12-02 07:52:19.972 20039 INFO glance.wsgi.server [-] 192.168.122.11 - - [02/Dec/2014 07:52:19] "POST /v1/images HTTP/1.1" 401 381 3.662323

  I was caugth offguard by the SSL errors as I thought the
  authentication was supposed to take place over HTTP.  The
  documentation explicitely states in a note in the glance install
  section that the following lines can be commented out in glance-
  api.conf and glance-registry.conf:

      auth_host = 127.0.0.1
      auth_port = 35357
      auth_protocol = http

  It's stated that the auth_uri and identiry_uri replace the lines
  above.  Just for grins, I uncommented the auth_protocol line and was
  subsequently able to create a cirros image with glance.

      [root@controller]# grep -A 7 keystone_authtoken glance-*
      glance-api.conf:[keystone_authtoken]
      glance-api.conf-#auth_host = 127.0.0.1
      glance-api.conf-#auth_port = 35357
      glance-api.conf-auth_protocol = http
      glance-api.conf-auth_uri = http://controller:5000/v2.0
      glance-api.conf-identity_uri = http://controller:35357
      glance-api.conf-admin_tenant_name = service
      glance-api.conf-admin_user = glance
      --
      glance-registry.conf:[keystone_authtoken]
      glance-registry.conf-#auth_host = 127.0.0.1
      glance-registry.conf-#auth_port = 35357
      glance-registry.conf-auth_protocol = http
      glance-registry.conf-auth_uri = http://controller:5000/v2.0
      glance-registry.conf-identity_uri = http://controller:35357
      glance-registry.conf-admin_tenant_name = service
      glance-registry.conf-admin_user = glance
      
      [root@controller]# !390
      service glance-registry restart ; service glance-api restart
      glance-registry stop/waiting
      glance-registry start/running, process 20377
      glance-api stop/waiting
      glance-api start/running, process 20387
      
      
      [root@controller]# cd /tmp/images/
      [root@controller]# !395
      glance image-create --name "cirros-0.3.3-x86_64" --file cirros-0.3.3-x86_64-disk.img --disk-format qcow2 --container-format bare --is-public True --progress
      [=============================>] 100%
      +------------------+--------------------------------------+
      | Property         | Value                                |
      +------------------+--------------------------------------+
      | checksum         | 133eae9fb1c98f45894a4e60d8736619     |
      | container_format | bare                                 |
      | created_at       | 2014-12-02T15:06:32                  |
      | deleted          | False                                |
      | deleted_at       | None                                 |
      | disk_format      | qcow2                                |
      | id               | 2d90376a-68e0-467b-afd6-7cb277e5f0cf |
      | is_public        | True                                 |
      | min_disk         | 0                                    |
      | min_ram          | 0                                    |
      | name             | cirros-0.3.3-x86_64                  |
      | owner            | None                                 |
      | protected        | False                                |
      | size             | 13200896                             |
      | status           | active                               |
      | updated_at       | 2014-12-02T15:06:33                  |
      | virtual_size     | None                                 |
      +------------------+--------------------------------------+
      [root@controller]# 

  I'm not sure if this is a (known) bug in glance/keystone or if the
  documentation is incorrect.  Glance is now working for me, just not
  sure whose attention is needed here or if this is a known bug.  Thanks
  in advance for any assistance.

To manage notifications about this bug go to:
https://bugs.launchpad.net/glance/+bug/1398495/+subscriptions

Follow ups

References

  Thread Previous • Date Previous • • Thread Next