ac100 team mailing list archive

[Tomáš Vaculín <tvaculin@xxxxxxxxx>]

OK, rc.local edited as you proposed.
I will test it and report result (whatever I will find).

Thanks


Dne 2. dubna 2012 19:37 Marc Dietrich <marvin24@xxxxxx> napsal(a):

> On Monday 02 April 2012 16:37:41 Tomáš Vaculín wrote:
> > Hi Marc,
> >
> > Attached please find whole kern.log from last run when the problem
> occurred.
> >
> > Except start of the system I found this:
> > Apr  2 15:15:45 ac100 kernel: [ 3707.346624] nvec nvec.0: unexpected
> status
> > flags 0x18 during state 1
> >
> > Kernel version is 3.0.19-2-ac100
>
> yes, I also saw this. Could be harmless or the source of the problems,
> hard to predict ...
>
> But you can put something like this into your /etc/rc.local:
>
>        echo 16384 > /proc/sys/vm/min_free_kbytes
>
> to get rid of the wifi warnings.
>
> A limited emergency pool can also be a reason for lost nvec packages.
>
> Marc
>
> >
> >
> >    Tomas
> >
> >
> > Dne 2. dubna 2012 16:16 Marc Dietrich <marvin24@xxxxxx> napsal(a):
> >
> > > Hi Tomáš,
> > >
> > > Am Montag, 2. April 2012, 15:52:26 schrieb Tomáš Vaculín:
> > > > Hello all,
> > > >
> > > > I installed fresh BETA 2 armhf of Ubuntu 12.04 and I'm facing to
> problem
> > > > with touchpad.
> > > >
> > > > After let's say 10-20 minutes the touchpad is working just with
> touching
> > > by
> > > > two fingers (even click must be done by two fingers).
> > > >
> > > > Than later on the touchpad stop working totally.
> > >
> > > >
> > > > Does anybody have the same problem?
> > > > Is there any workaround?
> > > >
> > > > I have 10N version of AC100.
> > >
> > > can you please check if there are some nvec related messages in
> > > /var/log/kern.log.
> > >
> > > The kernel should be the same as many people are using on 11.10. So I
> can't
> > > think of a reason it is kernel related, but who knows ...
> > >
> > > Marc
> > >
> > >
>