dhis2-users team mailing list archive

[samuel cheburet <samuelcheburet@xxxxxxxxx>]

Thanks Suzuki.

I total Agree with you Suzuki . On area of GIS Some of the issues noted on
Demo on offline DHIS 2.4 Beta and  current version DHIS 2.3:-



   1.  if one use Symbol layer edit icon at the top of the Map
   the symbol layer dialogue box appear. check under legend option - legend set
   and update is disable
   2. In the map layers if one check box of both facility and symbol layer
   or one of them the feature data is not shown hence  After removing
   symbol layer and facility layer then recovered.
   3. Also The change of symbol Icon  for facility layer could be useful
   when one use in creating Health facility Decalogue representing the kind of
   services offered in any facility like ambulatory service, ???? Is there
   international standard symbol  which could represent a health service and
   other organization structures.
   4. Under dashboard on ANC dropout rate example seen require baseline and
   target so that one can be viewing if a orgunit is operating below the
   baseline or between the baseline and target or above the target.
   5. There is need to include commutative target which use either
   population.
   6. X-axis and Y-Axis require to include the title e.g x-axis can be
   orgunit name, period etc while Y-Axis can be proportion %, Number etc. The
   current dashboard or charts are misleading due to the labelling because
   title alone can qualify the data interpretation either it is number of
   proportion.

See attached for additional proposal.

Regards





On Tue, Aug 23, 2011 at 2:48 PM, Shinichi Suzuki <shin461@xxxxxxxxx> wrote:

> Thanks Lars,
>
> I have tested Offline capability successfully and need to add describe two
> sentences into the document.
> "Once you shut down the browser before offline update, then you will lose
> metadata.
> Once you shut down the browser before uploading the offline updated data,
> then you will lose these data."
> I will recommended to use "Suspend" and "Resume" capability for note book
> users to keep browsers up.
> GIS test report will send by Cheburet, later.
>    Best regards,
>      Suzuki
>
> -----Original Message-----
> From: dhis2-devs-bounces+shin461=gmail.com@xxxxxxxxxxxxxxxxxxx
> [mailto:dhis2-devs-bounces+shin461=gmail.com@xxxxxxxxxxxxxxxxxxx] On
> Behalf
> Of Lars Helge Overland
> Sent: Monday, August 22, 2011 10:18 AM
> To: DHIS 2 developers; dhis2-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Dhis2-devs] DHIS 2 version 2.4 BETA available
>
> Hi all,
>
>
> we have made a preview of DHIS version 2.4 available here:
>
> http://demo.dhis2.org
>
> Username and password is admin/district. You can download the WAR file from
> here:
>
> http://dhis2.org/download/dhis-2.4-beta.war
>
>
> There are two features we would like to get feedback on in particular:
>
>
> 1. Offline data entry:
>
> Data can now be entered while being disconnected from the Internet.
> You need to be online while logging onto the data entry module - the very
> first time this will take a few extra seconds (7+ depending on the
> connection) since all meta-data are downloaded and stored in your browser
> in
> the background. Its cool, try it out yourself:
>
> - Open the data entry module, select an organisation unit, data set and
> period. Punch in a few data values. (Use your local IP address if testing
> locally.)
>
> - Disconnect yourself from the Internet. Notice how the system detects your
> offline status and displays a notification.
>
> - See how everything works as before: You can continue to expand, collapse
> and select organisation units from the tree. You can select data sets and
> periods. Forms are loaded as usual. You can continue to enter data values
> and mark data sets as complete for as long as you want.
>
> - Re-connect to the Internet. See the notification from the system
> explaining that you have locally stored data, and click "upload" to send
> the
> data to the server. If you have been disconnected long enough for the
> session to time out you will be asked to log in again (without leaving the
> page).
>
> o Nice additional benefits are that everything is a lot more responsive and
> that bandwidth usage is greatly reduced as most data is now loaded locally.
>
> o There are currently a few limitations in offline mode: Data values,
> completeness registrations and min-max values on the server are not
> displayed in the forms and the validation and history functions are
> disabled.
>
> o Firefox will ask for your permission for DHIS 2 to store data locally,
> please allow this.
>
>
> All this hopefully has the potential to make the online deployment
> strategy,
> with all its benefits, feasible for areas with patchy Internet connectivity
> and power supply. Given a latop or generator, this means that record
> officers can continue their data entry work throughout the day even if
> Internet connectivity or power supply have gone down temporarily. Using the
> myDatamart tool she can also do offline data analysis.
>
>
>
> 2. GIS symbol layer:
>
> 1. The menu system has had an overhaul: The left-side menu is gone and the
> layer and map-view information has been put on the top bar to make it more
> accessible and give more space for the map itself. Information about the
> current selection for each layer is displayed in the right-side menu.
> Map-views can be loaded into specific layers, making it possible to load
> different map-views into multiple layers at the same time.
>
> 2. A new "Symbol layer" is available. (Sorry for the confusion - the
> current
> symbol layer has been renamed to "Facility layer".) This makes it possible
> to do thematic mapping where images/symbols represent the values rather
> than
> colors. One use case for this is displaying weather data relevant for
> Malaria outbreak monitoring on the maps - think weather forecast with suns
> and rain clouds.
>
> - Define symbols/images as regular "Predefined legend sets", make sure you
> select "Image" as symbolizer rather than "Color" (we will add more symbols
> later).
>
> - Open "Symbol layer" from the top bar, layer section (4th icon from the
> left). Select indicator, period and organisation units as usual.
> Select your preferred legend set and click "Update".
>
>
>
>
>
> We are hoping for your participation and feedback. The final 2.4 release
> will be on Friday 26.
>
>
>
> best regards,
>
>
> the DHIS 2 development team
>
> _______________________________________________
> Mailing list: https://launchpad.net/~dhis2-devs
> Post to     : dhis2-devs@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~dhis2-devs
> More help   : https://help.launchpad.net/ListHelp
>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~dhis2-devs
> Post to     : dhis2-devs@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~dhis2-devs
> More help   : https://help.launchpad.net/ListHelp
>



-- 
Samuel Cheburet
Ministry Of Health
P.O. Box 20781
Nairobi, Kenya
Mobile- 0721624338

*Don't Compromise The Quality! Don't Risk It! apply Available Standards to
Achieve Your/organizational Goal.*

Attachment: DHIS Proposals Areas.ppt
Description: MS-Powerpoint presentation