fenics team mailing list archive

[Anders Logg <logg@xxxxxxxxx>]

On Mon, Sep 18, 2006 at 09:48:50PM +0200, Mandus wrote:
> Hi,
> 
> you can usually fake things such that a 32bit binary can run on 64bit
> linux - for instance I do that with acrobat.
> 
> It is however not so easy to build programs on a 64bit linux, either
> for 64bit linux or 32bit linux, using a mixture of 32bit libs (the
> fenics/dolfin libs) and 64bit libs.
> 
> I tried to install the binary fenics on my 64bit ubuntu right now. If
> -m32 is added to the cflags and ldflags in the Makefile you can use
> for instance the supplied libdolfin.so.0, only to get another problem
> around the next corner. For instance, ncurses is usually required for
> dolfin stuff, and the dev-version on your 64bit linux is probably
> 64bit. Hence, you end up mixing stuff, which is not good.

The distribution is built without support for curses (--disble-curses)
so that shouldn't be a problem. All other non-standard dependencies
should be included in the distribution. Currently included libraries
are Apbuild, libxml2, UMFPACK and Boost.

> I think a better approach will be to create a 64bit binary version of
> fenics. I guess we can replicate your scripts on my computer, Anders,
> to get this.
> 
> Let's talk about it tomorrow :)

Yep. The build-script is available by

    hg clone http://www.fenics.org/hg/fenics

This contains the script that builds the binary distribution.

/Anders


> 
> On 9/18/06, tomtzigt <tomtzigt@xxxxxxxxxxxxxxxx> wrote:
> > SuSE 10 is an x86_64 target. That would explain why all the binary
> > distributions have a 32bit and a 64bit distribution. Ok, do you or your IT
> > support staff have an idea if we can fake a 32bit target on SuSE? I have to
> > believe you can, but I can't find anything on the either the help system or
> > even google for the moment (tried "running 32bit code on 64bit linux").
> >
> > Theo
> >
> > -----Original Message-----
> > From: fenics-dev-bounces@xxxxxxxxxx [mailto:fenics-dev-bounces@xxxxxxxxxx]
> > On Behalf Of 'Anders Logg'
> > Sent: Monday, September 18, 2006 2:06 PM
> > To: fenics-dev@xxxxxxxxxx; 'Discussion of DOLFIN development'
> > Subject: Re: [FEniCS-dev] FEniCS 0.1.0-pre2
> >
> > Is this a 686 Linux machine?
> >
> > This really looks like a problem you would get if you compile on a
> > different architecture.
> >
> > /Anders
> >
> >
> > On Mon, Sep 18, 2006 at 02:02:56PM -0400, tomtzigt wrote:
> > > Still the same problem with respect to the format of the binaries. Is
> > there
> > > a command line tool that we can use to quantify the .so format on these
> > > different machines and compiler sets?
> > >
> > >
> > >
> > > Ignoring the old RedHat box, here is the SuSE log for the new pre2
> > release:
> > >
> > > tomtzigt@tomtzigt-ws1:~/fenics/fenics-0.1.0-pre2/demo/dolfin/pde/poisson>
> > > make
> > > `dolfin-config --compiler` `dolfin-config --cflags` -c main.cpp
> > > `dolfin-config --linker` -o dolfin-poisson main.o `dolfin-config --cflags`
> > > `dolfin-config --libs`
> > > libtool: link: warning: library
> > > `/home/tomtzigt/fenics/fenics-0.1.0-pre2/lib/libdolfin.la' was moved.
> > > libtool: link: warning: library
> > > `/home/tomtzigt/fenics/fenics-0.1.0-pre2/lib/libxml2.la' was moved.
> > > libtool: link: warning: library
> > > `/home/tomtzigt/fenics/fenics-0.1.0-pre2/lib/libdolfin.la' was moved.
> > > libtool: link: warning: library
> > > `/home/tomtzigt/fenics/fenics-0.1.0-pre2/lib/libxml2.la' was moved.
> > > /home/tomtzigt/fenics/fenics-0.1.0-pre2/lib//libdolfin.so.0: could not
> > read
> > > symbols: File in wrong format
> > > collect2: ld returned 1 exit status
> > > make: *** [dolfin-poisson] Error 1
> > >
> > > tomtzigt@tomtzigt-ws1:~/fenics/fenics-0.1.0-pre2/demo/dolfin/pde/poisson>
> > > gcc --version
> > > gcc (GCC) 4.0.2 20050901 (prerelease) (SUSE Linux)
> > >
> > > Theo
> > >
> > > -----Original Message-----
> > > From: fenics-dev-bounces@xxxxxxxxxx [mailto:fenics-dev-bounces@xxxxxxxxxx]
> > > On Behalf Of Anders Logg
> > > Sent: Monday, September 18, 2006 12:19 PM
> > > To: Discussion of FEniCS development; Discussion of DOLFIN development
> > > Subject: [FEniCS-dev] FEniCS 0.1.0-pre2
> > >
> > > Please try the new package:
> > >
> > >     http://www.fenics.org/pub/software/fenics/v0.1/
> > >
> > > Unpack the file, run ./install and type 'source fenics.setup'.
> > >
> > > Then go to demo/dolfin/pde/poisson and type 'make'.
> > >
> > > If this works, then run the program by './dolfin-poisson' and plot
> > > the solution with 'python plot.py'.
> > >
> > > This new version has been built with apg++ from autopackage which
> > > could solve some problems. It has not been double compiled with
> > > support for old g++ versions so you need a reasonably fresh g++
> > > install.
> > >
> > > Does it work for anyone?
> > >
> > > /Anders
> > >
> > > md5sum: 66d7b40f9dc8f5ed626019e7bbb4cb04
> > > _______________________________________________
> > > FEniCS-dev mailing list
> > > FEniCS-dev@xxxxxxxxxx
> > > http://www.fenics.org/mailman/listinfo/fenics-dev
> > >
> > >
> > >
> > > _______________________________________________
> > > FEniCS-dev mailing list
> > > FEniCS-dev@xxxxxxxxxx
> > > http://www.fenics.org/mailman/listinfo/fenics-dev
> > _______________________________________________
> > FEniCS-dev mailing list
> > FEniCS-dev@xxxxxxxxxx
> > http://www.fenics.org/mailman/listinfo/fenics-dev
> >
> >
> >
> > _______________________________________________
> > FEniCS-dev mailing list
> > FEniCS-dev@xxxxxxxxxx
> > http://www.fenics.org/mailman/listinfo/fenics-dev
> >
> 
>