fuel-dev team mailing list archive

["Gandhirajan Mariappan (CW)" <gmariapp@xxxxxxxxxxx>]

Hi,

"Verify Network" is getting failed. Kindly let us know how to proceed on this.
We have created 3 VLANs (VLAN101, VLAN102, VLAN103) in the Brocade VDX device and assigned the ports connected to Server as tagged VLAN.

We are using default IP addresses in Networks tab > VLAN Manager. Do we need to set any other configuration in the Brocade VDX device apart from VLAN settings (please refer below snippet)?

Brocade VDX Configuration:
sw0# show vlan brief
Total Number of VLANs configured : 11
VLAN       Name            State                      Ports
(F)-FCoE                                             (u)-Untagged, (t)-Tagged
(R)-RSPAN                                            (c)-Converged
======== =============== ========================== ================================================
101      VLAN0101        ACTIVE                     Te 139/0/13(c)   Te 133/0/24(c)
                                                    Te 133/0/21(t)   Te 133/0/18(c)
                                                    Te 133/0/17(c)   Te 133/0/16(c)
                                                    Te 133/0/14(c)   Te 133/0/13(t)
                                                    Te 133/0/8(c)   Te 133/0/7(t)
102      VLAN0102        ACTIVE                     Te 139/0/13(c)   Te 133/0/24(c)
                                                    Te 133/0/21(t)   Te 133/0/18(c)
                                                    Te 133/0/17(c)   Te 133/0/16(c)
                                                    Te 133/0/14(c)   Te 133/0/13(t)
                                                    Te 133/0/8(c)   Te 133/0/7(t)
103      VLAN0103        ACTIVE                     Te 139/0/13(c)   Te 133/0/24(c)
                                                    Te 133/0/21(t)   Te 133/0/18(c)
                                                    Te 133/0/17(c)   Te 133/0/16(c)
                                                    Te 133/0/14(c)   Te 133/0/13(t)
                                                    Te 133/0/8(c)   Te 133/0/7(t)


Current Setup:
Our setup consists of 3 nodes (1-master, 1-Controller, 1-Compute) and all three are connected to Brocade VDX device
[cid:image001.png@01CF8172.F7641560]

Verify Network:
Flow got completed in 1st node and 2nd node below, whereas Flow is in-progress for some time (around 30 minutes) for 3rd node (we do not have 3rd slave node in our setup)
[cid:image006.jpg@01CF8180.B57EB250]

After some time (around 30 minutes), connections are getting failed.

[cid:image007.jpg@01CF8180.B57EB250]

[cid:image009.jpg@01CF8180.B57EB250]

[cid:image013.jpg@01CF8180.B57EB250]

Thanks and Regards,
Gandhi Rajan