hugin-devs team mailing list archive

[Maurice Clerc <Maurice.Clerc@xxxxxxxxxxx>]

Le 26/08/2014 16:41, Stefan Peter a écrit :
> Am 26.08.2014 um 15:39 schrieb Maurice Clerc:
>>> Which control point detector do you use? Have you reset the
>>> preferences in hugin after installing RC3? You are aware of the fact
>>> that autopano-sift-c is not shipped anymore with the newer releases?
>> As I am not an expert, I did not change any value, and everything is by
>> default.
> No, if you upgraded from an older version, the old program settings are
> still around. Especially the settings for the control point detectors
> can not reliably be checked by Hugin. Therefore, Hugin pops up this
> warning when older settings are encountered and asks you to reset the
> settings to their (eventually new) default settings. You can avoid a lot
> of head scratching, swearing and (in your case) manual labor if you
> follow this advice!!

I never have seen this advice.
>
>
>>   I checked: Autopano -SHIFT (not Autopano-SHIFT-C).
> I bet if you change this to "Hugin's CPFind" it will work.
I do not see this choice. I have
Autopano-SHIFT(valeur par défaut)   (BTW, it seems it should be SIFT)
Autopano-SHIFT-C
Panomatic
Match-n-shift
Align Image stack

However, cpfind does exist on my computer (command line is possible). So 
I added it in Hugin:
Program: /usr/bin/cpfind
Parameters: --celeste -o %o  %i
and set it as the default choice.
But even like that, no control points are generated.


>   Unless you
> compiled it yourself for your shiny new system, chances are dim that you
> sill have a usable autopano-sift on your system. You can try this from
> the command line, if you don't believe me. Just enter "autopano" and
> then press <TAB> twice.
=> unknown command
I completely removed Hugin, then reinstalled it from the Ubuntu Software 
Center (version RC3).
Still the same problem.


Maurice Clerc

-- 
You received this bug notification because you are a member of Hugin
Developers, which is subscribed to Hugin.
https://bugs.launchpad.net/bugs/1361343

Title:
  Ubuntu 14.10, no automatic control points

Status in Hugin - Panorama Tools GUI:
  New

Bug description:
  No automatic control points any more (it worked under Ubuntu 12). I
  now always have to add them manually, even for "obvious"  and easy
  panoramas.

  Système d'exploitation : Linux 3.16.0-10-generic i686
  Architecture : 32 bits
  Mémoire libre : 467876 kio

  Hugin
  Version : 2014.0.0.45cf4a3e9573
  Chemin vers les ressources : /usr/share/hugin/xrc/
  Chemin vers les données : /usr/share/hugin/data/
  Chemin vers la base de données lensfun de l'utilisateur : /home/maurice/.local/share/lensfun

  Bibliothèques
  wxWidgets: 3.0.1.0
  libpano13: 2.9.19 
  Boost: 1.55.0
  Exiv2: 0.24.0
  Lensfun: 0.2.8.0

To manage notifications about this bug go to:
https://bugs.launchpad.net/hugin/+bug/1361343/+subscriptions