hybrid-graphics-linux team mailing list archive

[Gavin <mdcore@xxxxxxxxx>]

I've tried running it on GNome 3 and I get
[VGL] ERROR: Could not open display :1.

On Tue, May 10, 2011 at 4:27 PM, Miguel Vera Belmonte
<mikiloz92@xxxxxxxxx>wrote:

> By the way, has anyone tested bumblebee on GNOME3? Does it work?
>
>
> 2011/5/10 Martin Juhl <mj@xxxxxxxxxxxx>
>
>> Hi
>>
>> Either reboot...
>>
>> or run
>>
>>
>> /etc/init.d/xdm-optimus start
>>
>> that should do it...
>>
>>
>> /Martin
>>
>>
>>
>> ------------------------------
>> *Fra: *"Albert Vilella" <avilella@xxxxxxxxx>
>> *Til: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>> *Cc: *"Gaspo" <martin@xxxxxxxx>,
>> hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> *Sendt: *tirsdag, 10. maj 2011 13:32:51
>>
>> *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been released...
>> updated script and new name...
>>
>> Hi Martin,
>>
>> Once installed, does it need a restart or should the instructions below
>> suffice?
>>
>> sudo apt-get install git
>> # type-in password
>> git clone https://github.com/MrMEEE/bumblebee.git
>> cd bumblebee/
>> sudo ./install.sh
>> optirun64 glxgears
>>
>> On Tue, May 10, 2011 at 11:33 AM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>> > Yeah... exactly...
>> >
>> > I just finished implementing the same change in v.1.1.1.. so now the
>> 32-bit
>> > support should work...
>> >
>> >
>> >
>> >
>> > ________________________________
>> > Fra: "Gaspo" <martin@xxxxxxxx>
>> > Til: "Martin Juhl" <mj@xxxxxxxxxxxx>
>> > Cc: hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> > Sendt: tirsdag, 10. maj 2011 12:30:36
>> > Emne: Re: [Hybrid-graphics-linux] bumblebee v1.0 has been released...
>> > updated script and new name...
>> >
>> > Finaly.. I found it
>> >
>> > xdm-optimus is actualy xdm, right? I have installed 32bit version of
>> > xdm, renamed it and it works now. Im getting 1000 fps.
>> >
>> > The glxgear window is still lagging as hell, but Im heading right way, I
>> > hope.
>> >
>> > Gaspo
>> >
>> > On 10/05/11 11:50, Martin Juhl wrote:
>> >> Ok..
>> >>
>> >> Please send me your Xorg.1.log now
>> >>
>> >> /Martin
>> >>
>> >>
>> >>
>> >>
>> ------------------------------------------------------------------------
>> >> *Fra: *"Gaspo" <martin@xxxxxxxx>
>> >> *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >> *Sendt: *tirsdag, 10. maj 2011 11:26:21
>> >> *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been released...
>> >> updated script and new name...
>> >>
>> >> OK, Im sorry, after I restarted my notebook, things has changed a bit..
>> >>
>> >> $ ps aux | grep X
>> >>
>> >> root 1150 8.9 0.8 283508 24316 tty7 Ss+ 11:16 0:23
>> >> /usr/bin/X :0 -nr -verbose -auth
>> >> /var/run/gdm/auth-for-gdm-wTPORz/database -nolisten tcp vt7
>> >>
>> >> X server is back on vt7, I dont know how it got to 9. But now I get
>> this
>> >> error:
>> >>
>> >> [VGL] ERROR: Could not open display :1
>> >>
>> >> I will search more, but no luck so far. Please let me know if you have
>> >> any idea.
>> >>
>> >> Gaspo
>> >>
>> >> On 10/05/11 10:52, Gaspo wrote:
>> >>  > $ ps aux |grep X
>> >>  >
>> >>  > root 4718 6.6 1.3 297172 38876 tty9 Ss+ 08:42 7:55 /usr/bin/X :1 -br
>> >>  > -verbose -auth /var/run/gdm/auth-for-gdm-ZmhXqe/database -nolisten
>> tcp
>> >>  >
>> >>  > gaspo 8315 0.0 0.0 4160 848 pts/2 S+ 10:42 0:00 grep --color=auto X
>> >>  >
>> >>  > and
>> >>  >
>> >>  > after changing
>> >>  > LD_LIBRARY_PATH=/usr/lib/nvidia-current/ DISPLAY=:1 glxgears\
>> >>  >
>> >>  > I ran:
>> >>  > $ sudo /etc/init.d/xdm-optimus stop
>> >>  > * Stopping X display manager xdm-optimus
>> >>  >
>> >>  > $ sudo /etc/init.d/xdm-optimus start
>> >>  > * Starting X display manager xdm-optimus
>> >>  > Xlib: extension "NV-GLX" missing on display ":1".
>> >>  > Xlib: extension "NV-GLX" missing on display ":1".
>> >>  > Running synchronized to the vertical refresh. The framerate should
>> be
>> >>  > approximately the same as the monitor refresh rate.
>> >>  > 343 frames in 5.0 seconds = 68.067 FPS
>> >>  >
>> >>  > But the window with gears refreshes only 2-3 times per second.
>> >>  >
>> >>  > running "optirun glxgears" is with no change.
>> >>  >
>> >>  >
>> >>  > On 10/05/11 10:34, Martin Juhl wrote:
>> >>  >> and also send me a:
>> >>  >>
>> >>  >> ps aux |grep X
>> >>  >>
>> >>  >> and your
>> >>  >>
>> >>  >> /var/log/Xorg.1.log
>> >>  >>
>> >>  >>
>> >>  >>
>> >>  >>
>> >>
>> ------------------------------------------------------------------------
>> >>  >> *Fra: *"Gaspo" <martin@xxxxxxxx>
>> >>  >> *Til: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>> >>  >> *Cc: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >>  >> *Sendt: *tirsdag, 10. maj 2011 09:55:48
>> >>  >> *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been
>> >> released...
>> >>  >> updated script and new name...
>> >>  >>
>> >>  >> Hi,
>> >>  >>
>> >>  >> Im sorry, I forgot..
>> >>  >>
>> >>  >> I've done these changes before, and the test I did was actualy with
>> >> them
>> >>  >> applied.
>> >>  >>
>> >>  >> Any other ideas?
>> >>  >>
>> >>  >> Gaspo
>> >>  >>
>> >>  >> On 10/05/11 09:29, Martin Juhl wrote:
>> >>  >> > Hi..
>> >>  >> >
>> >>  >> > Thanks for the info..
>> >>  >> >
>> >>  >> > Try to change the following to things:
>> >>  >> >
>> >>  >> > /etc/init.d/xdm-optimus line 64:
>> >>  >> >
>> >>  >> > change:
>> >>  >> >
>> >>  >> > LD_LIBRARY_PATH=/usr/lib64/nvidia-current start-stop-daemon
>> --start
>> >>  >> > --quiet $SSD_START_ARGS -- -config
>> /etc/X11/xdm-optimus/xdm-config\
>> >> to
>> >>  >> >
>> >>  >> > LD_LIBRARY_PATH=/usr/lib/nvidia-current start-stop-daemon --start
>> >>  >> > --quiet $SSD_START_ARGS -- -config
>> /etc/X11/xdm-optimus/xdm-config\
>> >>  >> >
>> >>  >> >
>> >>  >> > and
>> >>  >> >
>> >>  >> > /usr/local/bin/optimusXserver line 2:
>> >>  >> >
>> >>  >> > LD_LIBRARY_PATH=/usr/lib64/nvidia-current /usr/bin/X $@
>> >>  >> >
>> >>  >> > to
>> >>  >> >
>> >>  >> > LD_LIBRARY_PATH=/usr/lib/nvidia-current /usr/bin/X $@
>> >>  >> >
>> >>  >> > I think that should do it... let me know how it goes...
>> >>  >> >
>> >>  >> > /Martin
>> >>  >> >
>> >>  >> >
>> >>  >> >
>> >>  >> >
>> >>  >>
>> >>
>> ------------------------------------------------------------------------
>> >>  >> > *Fra: *"Gaspo" <martin@xxxxxxxx>
>> >>  >> > *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >>  >> > *Sendt: *tirsdag, 10. maj 2011 09:22:30
>> >>  >> > *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been
>> >> released...
>> >>  >> > updated script and new name...
>> >>  >> >
>> >>  >> > Hi Martin,
>> >>  >> >
>> >>  >> > Im trying to make it work on my 32bit ubuntu. I have customized
>> your
>> >>  >> > install script. There were only few changes:
>> >>  >> >
>> >>  >> > dpkg -i install-files/VirtualGL_i386.deb
>> >>  >> > instead of 64bit version.
>> >>  >> >
>> >>  >> > and
>> >>  >> >
>> >>  >> > echo "VGL_DISPLAY=:1
>> >>  >> > export VGL_DISPLAY
>> >>  >> > VGL_COMPRESS=$IMAGETRANSPORT
>> >>  >> > export VGL_COMPRESS
>> >>  >> > VGL_READBACK=fbo
>> >>  >> > export VGL_READBACK
>> >>  >> >
>> >>  >> > alias optirun='vglrun -ld /usr/lib/nvidia-current'" >>
>> >> /etc/bash.bashrc
>> >>  >> >
>> >>  >> > instead of
>> >>  >> >
>> >>  >> > alias optirun32='vglrun -ld /usr/lib32/nvidia-current'
>> >>  >> > alias optirun64='vglrun -ld /usr/lib64/nvidia-current'" >>
>> >>  >> /etc/bash.bashrc
>> >>  >> >
>> >>  >> >
>> >>  >> > but when I run
>> >>  >> > $ optirun glxgears
>> >>  >> >
>> >>  >> > I get a black window and low fps with this output:
>> >>  >> >
>> >>  >> > Xlib: extension "NV-GLX" missing on display ":1".
>> >>  >> > Xlib: extension "NV-GLX" missing on display ":1".
>> >>  >> > [VGL] WARNING: The OpenGL rendering context obtained on X display
>> >>  >> > [VGL] :1 is indirect, which may cause performance to suffer.
>> >>  >> > [VGL] If :1 is a local X display, then the framebuffer device
>> >>  >> > [VGL] permissions may be set incorrectly.
>> >>  >> > 195 frames in 5.0 seconds = 38.994 FPS
>> >>  >> > 174 frames in 5.0 seconds = 34.514 FPS
>> >>  >> > 196 frames in 5.0 seconds = 39.157 FPS
>> >>  >> > 182 frames in 5.0 seconds = 36.312 FPS
>> >>  >> >
>> >>  >> > Could you please direct me, where sould I look to solve this?
>> >>  >> >
>> >>  >> > Gaspo
>> >>  >> >
>> >>  >> > On 10/05/11 00:02, Martin Juhl wrote:
>> >>  >> > > The script should take care of any pci setup...
>> >>  >> > >
>> >>  >> > >
>> >>  >> > > Please provide the logs:
>> >>  >> > > /var/log/Xorg.1.log and /var/log/xdm-optimus.log...
>> >>  >> > >
>> >>  >> > >
>> >>  >> > >
>> >>  >> > >
>> >>  >> > >
>> >>  >>
>> >>
>> ------------------------------------------------------------------------
>> >>  >> > > *Fra: *"Eric Bechet" <bechet@xxxxxxxxxx>
>> >>  >> > > *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >>  >> > > *Sendt: *mandag, 9. maj 2011 19:19:41
>> >>  >> > > *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been
>> >>  >> released...
>> >>  >> > > updated script and new name...
>> >>  >> > >
>> >>  >> > > Hi,
>> >>  >> > >
>> >>  >> > > Nice job.
>> >>  >> > >
>> >>  >> > > I've tested this on an asus eeepc1215N running ubuntu 10.04
>> (LTS)
>> >>  >> > >
>> >>  >> > > First, there seem to be at least two variants of the same
>> >> laptop, one
>> >>  >> > > with nvidia card at PCI 4:0:0 (at least one member of the list
>> >>  >> reported
>> >>  >> > > this port number) and another at 5:0:0 (mine)
>> >>  >> > >
>> >>  >> > > For now it is not working on my configuration. Installation is
>> >>  >> without
>> >>  >> > > trouble, but when using optirun64 (with glxgears for instance),
>> >>  >> nothing
>> >>  >> > > displays and a message says that it cannot open the display.
>> >>  >> > >
>> >>  >> > > running glxgears from command line is ok (uses the intel
>> graphic
>> >>  >> card)
>> >>  >> > >
>> >>  >> > > What can I do to help ?
>> >>  >> > >
>> >>  >> > > Eric
>> >>  >> > >
>> >>  >> > > Le 08/05/2011 23:19, Martin Juhl a écrit :
>> >>  >> > > > Hi all
>> >>  >> > > >
>> >>  >> > > > The prime-ng project has, for several reasons, been renamed
>> to
>> >>  >> > > bumblebee..
>> >>  >> > > >
>> >>  >> > > > The script has now also been updated... thanks to all for
>> your
>> >>  >> great
>> >>  >> > > > feedback.. keep it comming...
>> >>  >> > > >
>> >>  >> > > > bumblebee is Optimus support for Linux, with real offloading,
>> >>  >> and not
>> >>  >> > > > switchable graphics.. More important.. it works on Optimus
>> >> Laptops
>> >>  >> > > without a
>> >>  >> > > > graphical multiplexer..
>> >>  >> > > >
>> >>  >> > > > Version 1.0 of the bumblebee project has been release!!!
>> >> (version
>> >>  >> > > number has
>> >>  >> > > > been reset from the prime-ng project)
>> >>  >> > > >
>> >>  >> > > > The Installation should now be completely automatic...
>> >>  >> > > >
>> >>  >> > > >
>> >>  >> > > > Now 3D is enabled on both the Intel and the nVidia at the
>> same
>> >>  >> time..
>> >>  >> > > >
>> >>  >> > > >
>> >>  >> > > >
>> >>  >> > > > Status available here: http://www.martin-juhl.dk
>> >>  >> > > >
>> >>  >> > > > Code @GitHub: https://github.com/MrMEEE/bumblebee
>> >>  >> > > >
>> >>  >> > > > Twitter here: http://twitter.com/martinjuhl
>> >>  >> > > >
>> >>  >> > > >
>> >>  >> > > > Martin Juhl/MrMEEE
>> >>  >> > > >
>> >>  >> > > >
>> >>  >> > > >
>> >>  >> > > > _______________________________________________
>> >>  >> > > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> >>  >> > > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >>  >> > > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> >>  >> > > > More help : https://help.launchpad.net/ListHelp
>> >>  >> > >
>> >>  >> > >
>> >>  >> > > _______________________________________________
>> >>  >> > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> >>  >> > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >>  >> > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> >>  >> > > More help : https://help.launchpad.net/ListHelp
>> >>  >> > >
>> >>  >> > >
>> >>  >> > >
>> >>  >> > > _______________________________________________
>> >>  >> > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> >>  >> > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >>  >> > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> >>  >> > > More help : https://help.launchpad.net/ListHelp
>> >>  >> >
>> >>  >> > _______________________________________________
>> >>  >> > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> >>  >> > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >>  >> > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> >>  >> > More help : https://help.launchpad.net/ListHelp
>> >>  >
>> >>  >
>> >>  > _______________________________________________
>> >>  > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> >>  > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >>  > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> >>  > More help : https://help.launchpad.net/ListHelp
>> >>
>> >> _______________________________________________
>> >> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> >> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> >> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> >> More help : https://help.launchpad.net/ListHelp
>> >
>> > _______________________________________________
>> > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> > Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> > More help   : https://help.launchpad.net/ListHelp
>> >
>> >
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> More help   : https://help.launchpad.net/ListHelp
>>
>>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~hybrid-graphics-linux
> Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
> More help   : https://help.launchpad.net/ListHelp
>
>