hybrid-graphics-linux team mailing list archive

[Gavin <mdcore@xxxxxxxxx>]

I'm not sure if the nvidia acceleration works. When I've tried activating
those drivers i had problems, although that was with Gnome 2. Is there a way
for me to check the nvidia acceleration?

Also, it could be that I'm misconfiguring on install. My machine isn't in
the list so I'm not sure which option to set. Do I need to restart after
install? I'm just running vglclient in one terminal and then optirun in
another, and I haven't rebooted since installing.

Gavin

On Tue, May 10, 2011 at 4:41 PM, Miguel Vera Belmonte <mikiloz92@xxxxxxxxx>
 wrote:

> But that's more of a installation-related thing, no? I mean GNOME 3 uses
> Clutter, which requieres OpenGL acceleration I believe, so if the
> installation has been done without problems and both the intel and nvidia
> card acceleration works, could you run GNOME3 / GNOME-Shell then?
>
>
> 2011/5/10 Gavin <mdcore@xxxxxxxxx>
>
>> I've tried running it on GNome 3 and I get
>> [VGL] ERROR: Could not open display :1.
>>
>> On Tue, May 10, 2011 at 4:27 PM, Miguel Vera Belmonte <
>> mikiloz92@xxxxxxxxx> wrote:
>>
>>> By the way, has anyone tested bumblebee on GNOME3? Does it work?
>>>
>>>
>>> 2011/5/10 Martin Juhl <mj@xxxxxxxxxxxx>
>>>
>>>> Hi
>>>>
>>>> Either reboot...
>>>>
>>>> or run
>>>>
>>>>
>>>> /etc/init.d/xdm-optimus start
>>>>
>>>> that should do it...
>>>>
>>>>
>>>> /Martin
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>> *Fra: *"Albert Vilella" <avilella@xxxxxxxxx>
>>>> *Til: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>>>> *Cc: *"Gaspo" <martin@xxxxxxxx>,
>>>> hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> *Sendt: *tirsdag, 10. maj 2011 13:32:51
>>>>
>>>> *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been released...
>>>> updated script and new name...
>>>>
>>>> Hi Martin,
>>>>
>>>> Once installed, does it need a restart or should the instructions below
>>>> suffice?
>>>>
>>>> sudo apt-get install git
>>>> # type-in password
>>>> git clone https://github.com/MrMEEE/bumblebee.git
>>>> cd bumblebee/
>>>> sudo ./install.sh
>>>> optirun64 glxgears
>>>>
>>>> On Tue, May 10, 2011 at 11:33 AM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>>>> > Yeah... exactly...
>>>> >
>>>> > I just finished implementing the same change in v.1.1.1.. so now the
>>>> 32-bit
>>>> > support should work...
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > ________________________________
>>>> > Fra: "Gaspo" <martin@xxxxxxxx>
>>>> > Til: "Martin Juhl" <mj@xxxxxxxxxxxx>
>>>> > Cc: hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> > Sendt: tirsdag, 10. maj 2011 12:30:36
>>>> > Emne: Re: [Hybrid-graphics-linux] bumblebee v1.0 has been released...
>>>> > updated script and new name...
>>>> >
>>>> > Finaly.. I found it
>>>> >
>>>> > xdm-optimus is actualy xdm, right? I have installed 32bit version of
>>>> > xdm, renamed it and it works now. Im getting 1000 fps.
>>>> >
>>>> > The glxgear window is still lagging as hell, but Im heading right way,
>>>> I
>>>> > hope.
>>>> >
>>>> > Gaspo
>>>> >
>>>> > On 10/05/11 11:50, Martin Juhl wrote:
>>>> >> Ok..
>>>> >>
>>>> >> Please send me your Xorg.1.log now
>>>> >>
>>>> >> /Martin
>>>> >>
>>>> >>
>>>> >>
>>>> >>
>>>> ------------------------------------------------------------------------
>>>> >> *Fra: *"Gaspo" <martin@xxxxxxxx>
>>>> >> *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >> *Sendt: *tirsdag, 10. maj 2011 11:26:21
>>>> >> *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been
>>>> released...
>>>> >> updated script and new name...
>>>> >>
>>>> >> OK, Im sorry, after I restarted my notebook, things has changed a
>>>> bit..
>>>> >>
>>>> >> $ ps aux | grep X
>>>> >>
>>>> >> root 1150 8.9 0.8 283508 24316 tty7 Ss+ 11:16 0:23
>>>> >> /usr/bin/X :0 -nr -verbose -auth
>>>> >> /var/run/gdm/auth-for-gdm-wTPORz/database -nolisten tcp vt7
>>>> >>
>>>> >> X server is back on vt7, I dont know how it got to 9. But now I get
>>>> this
>>>> >> error:
>>>> >>
>>>> >> [VGL] ERROR: Could not open display :1
>>>> >>
>>>> >> I will search more, but no luck so far. Please let me know if you
>>>> have
>>>> >> any idea.
>>>> >>
>>>> >> Gaspo
>>>> >>
>>>> >> On 10/05/11 10:52, Gaspo wrote:
>>>> >>  > $ ps aux |grep X
>>>> >>  >
>>>> >>  > root 4718 6.6 1.3 297172 38876 tty9 Ss+ 08:42 7:55 /usr/bin/X :1
>>>> -br
>>>> >>  > -verbose -auth /var/run/gdm/auth-for-gdm-ZmhXqe/database -nolisten
>>>> tcp
>>>> >>  >
>>>> >>  > gaspo 8315 0.0 0.0 4160 848 pts/2 S+ 10:42 0:00 grep --color=auto
>>>> X
>>>> >>  >
>>>> >>  > and
>>>> >>  >
>>>> >>  > after changing
>>>> >>  > LD_LIBRARY_PATH=/usr/lib/nvidia-current/ DISPLAY=:1 glxgears\
>>>> >>  >
>>>> >>  > I ran:
>>>> >>  > $ sudo /etc/init.d/xdm-optimus stop
>>>> >>  > * Stopping X display manager xdm-optimus
>>>> >>  >
>>>> >>  > $ sudo /etc/init.d/xdm-optimus start
>>>> >>  > * Starting X display manager xdm-optimus
>>>> >>  > Xlib: extension "NV-GLX" missing on display ":1".
>>>> >>  > Xlib: extension "NV-GLX" missing on display ":1".
>>>> >>  > Running synchronized to the vertical refresh. The framerate should
>>>> be
>>>> >>  > approximately the same as the monitor refresh rate.
>>>> >>  > 343 frames in 5.0 seconds = 68.067 FPS
>>>> >>  >
>>>> >>  > But the window with gears refreshes only 2-3 times per second.
>>>> >>  >
>>>> >>  > running "optirun glxgears" is with no change.
>>>> >>  >
>>>> >>  >
>>>> >>  > On 10/05/11 10:34, Martin Juhl wrote:
>>>> >>  >> and also send me a:
>>>> >>  >>
>>>> >>  >> ps aux |grep X
>>>> >>  >>
>>>> >>  >> and your
>>>> >>  >>
>>>> >>  >> /var/log/Xorg.1.log
>>>> >>  >>
>>>> >>  >>
>>>> >>  >>
>>>> >>  >>
>>>> >>
>>>> ------------------------------------------------------------------------
>>>> >>  >> *Fra: *"Gaspo" <martin@xxxxxxxx>
>>>> >>  >> *Til: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>>>> >>  >> *Cc: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >>  >> *Sendt: *tirsdag, 10. maj 2011 09:55:48
>>>> >>  >> *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been
>>>> >> released...
>>>> >>  >> updated script and new name...
>>>> >>  >>
>>>> >>  >> Hi,
>>>> >>  >>
>>>> >>  >> Im sorry, I forgot..
>>>> >>  >>
>>>> >>  >> I've done these changes before, and the test I did was actualy
>>>> with
>>>> >> them
>>>> >>  >> applied.
>>>> >>  >>
>>>> >>  >> Any other ideas?
>>>> >>  >>
>>>> >>  >> Gaspo
>>>> >>  >>
>>>> >>  >> On 10/05/11 09:29, Martin Juhl wrote:
>>>> >>  >> > Hi..
>>>> >>  >> >
>>>> >>  >> > Thanks for the info..
>>>> >>  >> >
>>>> >>  >> > Try to change the following to things:
>>>> >>  >> >
>>>> >>  >> > /etc/init.d/xdm-optimus line 64:
>>>> >>  >> >
>>>> >>  >> > change:
>>>> >>  >> >
>>>> >>  >> > LD_LIBRARY_PATH=/usr/lib64/nvidia-current start-stop-daemon
>>>> --start
>>>> >>  >> > --quiet $SSD_START_ARGS -- -config
>>>> /etc/X11/xdm-optimus/xdm-config\
>>>> >> to
>>>> >>  >> >
>>>> >>  >> > LD_LIBRARY_PATH=/usr/lib/nvidia-current start-stop-daemon
>>>> --start
>>>> >>  >> > --quiet $SSD_START_ARGS -- -config
>>>> /etc/X11/xdm-optimus/xdm-config\
>>>> >>  >> >
>>>> >>  >> >
>>>> >>  >> > and
>>>> >>  >> >
>>>> >>  >> > /usr/local/bin/optimusXserver line 2:
>>>> >>  >> >
>>>> >>  >> > LD_LIBRARY_PATH=/usr/lib64/nvidia-current /usr/bin/X $@
>>>> >>  >> >
>>>> >>  >> > to
>>>> >>  >> >
>>>> >>  >> > LD_LIBRARY_PATH=/usr/lib/nvidia-current /usr/bin/X $@
>>>> >>  >> >
>>>> >>  >> > I think that should do it... let me know how it goes...
>>>> >>  >> >
>>>> >>  >> > /Martin
>>>> >>  >> >
>>>> >>  >> >
>>>> >>  >> >
>>>> >>  >> >
>>>> >>  >>
>>>> >>
>>>> ------------------------------------------------------------------------
>>>> >>  >> > *Fra: *"Gaspo" <martin@xxxxxxxx>
>>>> >>  >> > *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >>  >> > *Sendt: *tirsdag, 10. maj 2011 09:22:30
>>>> >>  >> > *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been
>>>> >> released...
>>>> >>  >> > updated script and new name...
>>>> >>  >> >
>>>> >>  >> > Hi Martin,
>>>> >>  >> >
>>>> >>  >> > Im trying to make it work on my 32bit ubuntu. I have customized
>>>> your
>>>> >>  >> > install script. There were only few changes:
>>>> >>  >> >
>>>> >>  >> > dpkg -i install-files/VirtualGL_i386.deb
>>>> >>  >> > instead of 64bit version.
>>>> >>  >> >
>>>> >>  >> > and
>>>> >>  >> >
>>>> >>  >> > echo "VGL_DISPLAY=:1
>>>> >>  >> > export VGL_DISPLAY
>>>> >>  >> > VGL_COMPRESS=$IMAGETRANSPORT
>>>> >>  >> > export VGL_COMPRESS
>>>> >>  >> > VGL_READBACK=fbo
>>>> >>  >> > export VGL_READBACK
>>>> >>  >> >
>>>> >>  >> > alias optirun='vglrun -ld /usr/lib/nvidia-current'" >>
>>>> >> /etc/bash.bashrc
>>>> >>  >> >
>>>> >>  >> > instead of
>>>> >>  >> >
>>>> >>  >> > alias optirun32='vglrun -ld /usr/lib32/nvidia-current'
>>>> >>  >> > alias optirun64='vglrun -ld /usr/lib64/nvidia-current'" >>
>>>> >>  >> /etc/bash.bashrc
>>>> >>  >> >
>>>> >>  >> >
>>>> >>  >> > but when I run
>>>> >>  >> > $ optirun glxgears
>>>> >>  >> >
>>>> >>  >> > I get a black window and low fps with this output:
>>>> >>  >> >
>>>> >>  >> > Xlib: extension "NV-GLX" missing on display ":1".
>>>> >>  >> > Xlib: extension "NV-GLX" missing on display ":1".
>>>> >>  >> > [VGL] WARNING: The OpenGL rendering context obtained on X
>>>> display
>>>> >>  >> > [VGL] :1 is indirect, which may cause performance to suffer.
>>>> >>  >> > [VGL] If :1 is a local X display, then the framebuffer device
>>>> >>  >> > [VGL] permissions may be set incorrectly.
>>>> >>  >> > 195 frames in 5.0 seconds = 38.994 FPS
>>>> >>  >> > 174 frames in 5.0 seconds = 34.514 FPS
>>>> >>  >> > 196 frames in 5.0 seconds = 39.157 FPS
>>>> >>  >> > 182 frames in 5.0 seconds = 36.312 FPS
>>>> >>  >> >
>>>> >>  >> > Could you please direct me, where sould I look to solve this?
>>>> >>  >> >
>>>> >>  >> > Gaspo
>>>> >>  >> >
>>>> >>  >> > On 10/05/11 00:02, Martin Juhl wrote:
>>>> >>  >> > > The script should take care of any pci setup...
>>>> >>  >> > >
>>>> >>  >> > >
>>>> >>  >> > > Please provide the logs:
>>>> >>  >> > > /var/log/Xorg.1.log and /var/log/xdm-optimus.log...
>>>> >>  >> > >
>>>> >>  >> > >
>>>> >>  >> > >
>>>> >>  >> > >
>>>> >>  >> > >
>>>> >>  >>
>>>> >>
>>>> ------------------------------------------------------------------------
>>>> >>  >> > > *Fra: *"Eric Bechet" <bechet@xxxxxxxxxx>
>>>> >>  >> > > *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >>  >> > > *Sendt: *mandag, 9. maj 2011 19:19:41
>>>> >>  >> > > *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been
>>>> >>  >> released...
>>>> >>  >> > > updated script and new name...
>>>> >>  >> > >
>>>> >>  >> > > Hi,
>>>> >>  >> > >
>>>> >>  >> > > Nice job.
>>>> >>  >> > >
>>>> >>  >> > > I've tested this on an asus eeepc1215N running ubuntu 10.04
>>>> (LTS)
>>>> >>  >> > >
>>>> >>  >> > > First, there seem to be at least two variants of the same
>>>> >> laptop, one
>>>> >>  >> > > with nvidia card at PCI 4:0:0 (at least one member of the
>>>> list
>>>> >>  >> reported
>>>> >>  >> > > this port number) and another at 5:0:0 (mine)
>>>> >>  >> > >
>>>> >>  >> > > For now it is not working on my configuration. Installation
>>>> is
>>>> >>  >> without
>>>> >>  >> > > trouble, but when using optirun64 (with glxgears for
>>>> instance),
>>>> >>  >> nothing
>>>> >>  >> > > displays and a message says that it cannot open the display.
>>>> >>  >> > >
>>>> >>  >> > > running glxgears from command line is ok (uses the intel
>>>> graphic
>>>> >>  >> card)
>>>> >>  >> > >
>>>> >>  >> > > What can I do to help ?
>>>> >>  >> > >
>>>> >>  >> > > Eric
>>>> >>  >> > >
>>>> >>  >> > > Le 08/05/2011 23:19, Martin Juhl a écrit :
>>>> >>  >> > > > Hi all
>>>> >>  >> > > >
>>>> >>  >> > > > The prime-ng project has, for several reasons, been renamed
>>>> to
>>>> >>  >> > > bumblebee..
>>>> >>  >> > > >
>>>> >>  >> > > > The script has now also been updated... thanks to all for
>>>> your
>>>> >>  >> great
>>>> >>  >> > > > feedback.. keep it comming...
>>>> >>  >> > > >
>>>> >>  >> > > > bumblebee is Optimus support for Linux, with real
>>>> offloading,
>>>> >>  >> and not
>>>> >>  >> > > > switchable graphics.. More important.. it works on Optimus
>>>> >> Laptops
>>>> >>  >> > > without a
>>>> >>  >> > > > graphical multiplexer..
>>>> >>  >> > > >
>>>> >>  >> > > > Version 1.0 of the bumblebee project has been release!!!
>>>> >> (version
>>>> >>  >> > > number has
>>>> >>  >> > > > been reset from the prime-ng project)
>>>> >>  >> > > >
>>>> >>  >> > > > The Installation should now be completely automatic...
>>>> >>  >> > > >
>>>> >>  >> > > >
>>>> >>  >> > > > Now 3D is enabled on both the Intel and the nVidia at the
>>>> same
>>>> >>  >> time..
>>>> >>  >> > > >
>>>> >>  >> > > >
>>>> >>  >> > > >
>>>> >>  >> > > > Status available here: http://www.martin-juhl.dk
>>>> >>  >> > > >
>>>> >>  >> > > > Code @GitHub: https://github.com/MrMEEE/bumblebee
>>>> >>  >> > > >
>>>> >>  >> > > > Twitter here: http://twitter.com/martinjuhl
>>>> >>  >> > > >
>>>> >>  >> > > >
>>>> >>  >> > > > Martin Juhl/MrMEEE
>>>> >>  >> > > >
>>>> >>  >> > > >
>>>> >>  >> > > >
>>>> >>  >> > > > _______________________________________________
>>>> >>  >> > > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>> >>  >> > > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >>  >> > > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>> >>  >> > > > More help : https://help.launchpad.net/ListHelp
>>>> >>  >> > >
>>>> >>  >> > >
>>>> >>  >> > > _______________________________________________
>>>> >>  >> > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>> >>  >> > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >>  >> > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>> >>  >> > > More help : https://help.launchpad.net/ListHelp
>>>> >>  >> > >
>>>> >>  >> > >
>>>> >>  >> > >
>>>> >>  >> > > _______________________________________________
>>>> >>  >> > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>> >>  >> > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >>  >> > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>> >>  >> > > More help : https://help.launchpad.net/ListHelp
>>>> >>  >> >
>>>> >>  >> > _______________________________________________
>>>> >>  >> > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>> >>  >> > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >>  >> > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>> >>  >> > More help : https://help.launchpad.net/ListHelp
>>>> >>  >
>>>> >>  >
>>>> >>  > _______________________________________________
>>>> >>  > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>> >>  > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >>  > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>> >>  > More help : https://help.launchpad.net/ListHelp
>>>> >>
>>>> >> _______________________________________________
>>>> >> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>> >> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> >> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>> >> More help : https://help.launchpad.net/ListHelp
>>>> >
>>>> > _______________________________________________
>>>> > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>> > Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>> > More help   : https://help.launchpad.net/ListHelp
>>>> >
>>>> >
>>>>
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>> Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>> More help   : https://help.launchpad.net/ListHelp
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>> Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>> More help   : https://help.launchpad.net/ListHelp
>>>
>>>
>>
>