hybrid-graphics-linux team mailing list archive

[adrian15 <adrian15sgd@xxxxxxxxx>]

I think this is the revelant information on dmesg about i915 not 
recognising LVDS modes and VBIOS tables not being found.

Any idea on how to fix this?

Thank you.

[    1.562891] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    1.562896] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.562898] [drm] Driver supports precise vblank timestamp query.
[    1.562905] [drm:intel_detect_pch], Found Ibex Peak PCH
[    1.562908] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[    1.562914] i915 0000:00:02.0: BAR 6: can't assign [??? 0x00000000
flags 0x0] (bogus alignment)
[    1.562916] [drm] failed to find VBIOS tables
[    1.562973] [drm:intel_dsm_pci_probe] *ERROR* failed to get
supported _DSM functions
[    1.562995] [drm:intel_dsm_pci_probe] *ERROR* failed to get
supported _DSM functions
[    1.563007] [drm:intel_modeset_init], 2 display pipes available.

...

[    1.562891] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    1.562896] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.562898] [drm] Driver supports precise vblank timestamp query.
[    1.562905] [drm:intel_detect_pch], Found Ibex Peak PCH
[    1.562908] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[    1.562914] i915 0000:00:02.0: BAR 6: can't assign [??? 0x00000000
flags 0x0] (bogus alignment)
[    1.562916] [drm] failed to find VBIOS tables
[    1.562973] [drm:intel_dsm_pci_probe] *ERROR* failed to get
supported _DSM functions
[    1.562995] [drm:intel_dsm_pci_probe] *ERROR* failed to get
supported _DSM functions
[    1.563007] [drm:intel_modeset_init], 2 display pipes available.
[    1.563016] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95764m) rev
5784100] (PCI Express) MAC address 10:9a:dd:4e:c2:a3
[    1.563019] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[    1.563024] tg3 0000:02:00.0: eth0: attached PHY is 5784
(10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    1.563029] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] TSOcap[1]
[    1.563032] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.563349] vga_switcheroo: ddc lock
[    1.565802] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus panel
[    1.565806] [drm:intel_lvds_init], No LVDS modes found, disabling.
[    1.565814] vga_switcheroo: ddc unlock
[    1.565860] [drm:intel_crt_init], pch crt adpa set to 0xf40000
[    1.568305] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[    1.568309] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[    1.568410] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[    1.568919] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[    1.568922] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    1.569428] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[    1.569430] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    1.569470] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[    1.569476] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[    1.570119] [drm:intel_update_fbc],
[    1.570121] [drm:intel_update_fbc], no output, disabling
[    1.570124] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[    1.570126] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[    1.570764] [drm:intel_update_fbc],
[    1.570765] [drm:intel_update_fbc], no output, disabling
[    1.570768] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0
has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[    1.570772] [drm:ironlake_init_pch_refclk], Disabling SSC entirely
[    1.592544] [drm:i915_setup_compression], FBC base 0x8e000000, ll
base 0x00000000, size 28M
[    1.592593] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:5:VGA-1]
[    1.592597] [drm:intel_ironlake_crt_detect_hotplug], trigger
hotplug detect cycle: adpa=0xf40000
[    1.607288] [drm:intel_ironlake_crt_detect_hotplug], ironlake
hotplug adpa=0xf40000, result 0
[    1.607296] [drm:intel_crt_detect], CRT not detected via hotplug
[    1.607301] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:5:VGA-1] disconnected
[    1.607308] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:9:HDMI-A-1]
[    1.609584] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
adapter i915 gmbus dpb
[    1.609586] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:9:HDMI-A-1] disconnected
[    1.609588] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:12:DP-1]
[    1.610095] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[    1.615773] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[    1.623757] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[    1.631235] [drm:intel_dp_detect], DPCD: 0000000000000000
[    1.631244] [drm:drm_helper_probe_single_connector_modes],
[CONNECTOR:12:DP-1] disconnected
[    1.631249] No connectors reported connected with modes
[    1.631252] [drm:drm_setup_crtcs],
[    1.631257] [drm:drm_enable_connectors], connector 5 enabled? no
[    1.631261] [drm:drm_enable_connectors], connector 9 enabled? no
[    1.631264] [drm:drm_enable_connectors], connector 12 enabled? no
[    1.631269] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[    1.631274] [drm] Cannot find any crtc or sizes - going 1024x768
[    1.638050] [drm:intelfb_create], allocated 1024x768 fb:
0x00043000, bo ffff88025be0f200
[    1.638326] Console: switching to colour frame buffer device 128x48
[    1.638345] fb0: inteldrmfb frame buffer device
[    1.638346] drm: registered panic notifier
[    1.639202] fixme: max PWM is zero.

El 23/10/12 00:05, adrian15 adrian15 escribió:
> I've already participated in this list:
> https://lists.launchpad.net/hybrid-graphics-linux/msg02228.html
> What I wanted to do is to be able to use my integrated Intel graphics
> card in my Debian Unstable at the same time that I turned off the
> Nvidia (discrete) one.
> I think I have managed to use the intel one although I'm not very sure
> if I have managed to turn off the discrete one because battery life
> only increased from 2h to 2h30m.
>
> Whatever, what I want to achieve right now is the same level of
> functionality as the one described here:
> http://linux-hybrid-graphics.blogspot.com.es/2012/04/apple-macbook-pro-and-linux-hybrid_21.html
> and in more detail:
> https://github.com/ah-/gmux-scripts
adrian15
--
Support free software. Donate to Super Grub Disk. Apoya el software
libre. Dona a Super Grub Disk.
http://www.supergrubdisk.org/index.php?pid=10


--
Support free software. Donate to Super Grub Disk. Apoya el software 
libre. Dona a Super Grub Disk. http://www.supergrubdisk.org/donate/