← Back to team overview

ius-community team mailing list archive

Re: yum-plugin-replace

 

Am I supposed to be seeing output after each wget, or only after the rpm command? 

I am not seeing any output at all. I signed in as root, changed the * to what I could see on the ius site, and this is all I get:

> # wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-5-4.noarch.rpm > # wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1.0-8.ius.el5.noarch.rpm > # rpm -Uvh ius-release-1.0-8ius.el5.noarch.rpm epel-release-5-4-noarch.rpm> # rpm -Uvh ius-release-1.0-8.ius.el5.noarch.rpm epel-release-5-4-noarch.rpm 
In other words, all I get is what I myself typed in. I'm not getting an error message. So this isn't working, but I have no idea why.

________________________________
From: Jeffrey Ness <jeffrey.ness@xxxxxxxxxxxxx>
To: Nat Colley <nat.colley@xxxxxxxxx>
Cc: Maulvi Bakar <maulvi@xxxxxxxxxx>; "ius-community@xxxxxxxxxxxxxxxxxxx" <ius-community@xxxxxxxxxxxxxxxxxxx>
Sent: Thursday, September 22, 2011 7:29 AM
Subject: Re: [Ius-community] yum-plugin-replace


As mentioned It does not appear the IUS RPM installed.

Please see the instruction on IUS page on installations:
http://iuscommunity.org/Docs/ClientUsageGuide#Configuration

If you are not logged in as 'root' you will need to use sudo with that rpm command, 
installing packages requires administrator privileges.

During installations you should see a progress bar go from 0% to 100% for both EPEL and IUS packages,
verify the installation worked by running the below command:

  rpm -q ius-release

Please let us know how this works and if you have issues post the output of above commands.

Thanks


---
Jeffrey Ness
Linux System Engineer
IT Operations [Development]
Rackspace Hosting & IUS Community

On Sep 22, 2011, at 5:04 AM, Nat Colley wrote:

Apparently ius release rpm didn't install at all. There is nothing about ius under yum locally. I can do it over, but I'd like to know if I did something wrong the first time. Can you look at the code I posted and tell?
>
>
>
>________________________________
>From: Maulvi Bakar <maulvi@xxxxxxxxxx>
>To: "ius-community@xxxxxxxxxxxxxxxxxxx" <ius-community@xxxxxxxxxxxxxxxxxxx>
>Sent: Thursday, September 22, 2011 4:51 AM
>Subject: Re: [Ius-community] yum-plugin-replace
>
>
>
>
>
>On Thu, Sep 22, 2011 at 5:30 PM, Nat Colley <nat.colley@xxxxxxxxx> wrote:
>
>Ok, first, oops, that folder reference should be yum.repos.d not conf.d where I see CentosBase etc but no ius.
>>Second, I don't seem to have a local yum rpm, at least I can't find one and I didn't think that was what I was doing when I ran wget. I thought I was telling the server to add this repository as a place to look for yum updates? Nevertheless, I did a search for yum local and got zero. Where would it be?
>>
>>
>>
>>________________________________
>> From: Maulvi Bakar <maulvi@xxxxxxxxxx>
>>To: "ius-community@xxxxxxxxxxxxxxxxxxx" <ius-community@xxxxxxxxxxxxxxxxxxx>
>>Sent: Wednesday, September 21, 2011 10:57 PM
>>Subject: Re: [Ius-community] yum-plugin-replace
>>
>>
>>
>>
>>
>>
>>On Thu, Sep 22, 2011 at 11:47 AM, Nat Colley <nat.colley@xxxxxxxxx> wrote:
>>
>>Hello to all. I'm new and this is my first post. I want to replace php and mysql on my server. I am running Centos 5.7 However, I can't seem to get this plug in:
>>>
>>>
>>>> # wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-2.ius.el5.noarch.rpm > # wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm > # rpm -Uvh ius-release*.rpm epel-release*.rpm > yum install yum-plugin-replace Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Setting up Install Process
No package yum-plugin-replace available.
Nothing to do > $ sudo yum install yum-plugin-replace  bash: $: command not found > sudo yum install yum-plugin-replace  sudo: sorry, you must have a tty to run sudo I looked in etc/yum/yum.conf.d and all there is there is CentosBase I stopped and started apache but that makes no difference. So what did I do wrong and how do I fix it?
>>>
>>>
>>>I was also a little confused by something I read here about this plugin not being needed/optional. Meaning it is optional depending on whether you want to upgrade the old way or the new way as outlined in the Client Usage page? Or is that page out of date? Thx.
>>>
>>>
>>
>>
>>
>>Try "yum install local <downloaded local rpm package filename>" 
>>
>>
>>
>>
>>Regards
>>
>>
>>Maulvi 
>>
>>
>>
>
>
>My apologies, the fingers typed faster than the brain  :-P
>
>
>Firstly, if the ius release rpm was installed successfully, check in "/etc/yum.repos.d/ius.repo" and see if the resource for [ius] it has the options "enabled=1"
>
>
>Once it is enabled, only then yum will start using ius repo..  Either that, you can keep it disabled and only run yum with "--enablerepo=ius" - eg. "yum install yum-plugin-replace --enablerepo=ius"
>
>
>My apologies for mistaking you in having difficulties with installing the ius/epel release rpms
>
>
>
>Regards
>
>
>Maulvi
>_______________________________________________
>Mailing list: https://launchpad.net/~ius-community
>Post to     : ius-community@xxxxxxxxxxxxxxxxxxx
>Unsubscribe : https://launchpad.net/~ius-community
>More help   : https://help.launchpad.net/ListHelp
>
>
>_______________________________________________
>Mailing list: https://launchpad.net/~ius-community
>Post to     : ius-community@xxxxxxxxxxxxxxxxxxx
>Unsubscribe : https://launchpad.net/~ius-community
>More help   : https://help.launchpad.net/ListHelp
>

Follow ups

References