kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #12880
[Bug 215624] Re: Philips Semiconductors DVB TV Tuner Card Not Working
Pac Shady, this bug was reported a while ago and there hasn't been any
activity in it recently. We were wondering if this is still an issue? If
so, could you please test for this with the latest development release
of Ubuntu? ISO images are available from http://cdimage.ubuntu.com
/daily-live/current/ .
If it remains an issue, could you please run the following command in
the development release from a Terminal
(Applications->Accessories->Terminal), as it will automatically gather
and attach updated debug information to this report:
apport-collect -p linux <replace-with-bug-number>
Also, could you please test the latest upstream kernel available following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Please do not test the daily folder, but the one all the way at the bottom. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER
where VERSION-NUMBER is the version number of the kernel you tested. For example:
kernel-fixed-upstream-v3.11
This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag:
needs-upstream-testing
If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER
As well, please remove the tag:
needs-upstream-testing
Once testing of the upstream kernel is complete, please mark this bug's
Status as Confirmed. Please let us know your results. Thank you for your
understanding.
** Tags added: needs-kernel-logs needs-upstream-testing
** Changed in: linux (Ubuntu)
Status: Triaged => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/215624
Title:
Philips Semiconductors DVB TV Tuner Card Not Working
Status in The Linux Kernel:
Confirmed
Status in “linux” package in Ubuntu:
Incomplete
Bug description:
My Medion MD96420 came with this DVB-T Tuner card, which doesn't seem
to have any drivers either out of the box or from v4l-dbv. As far as I
can tell, the remote control for it doesn't work either. Here are some
specs:
lsb_release -rd
Description: Ubuntu hardy (development branch)
Release: 8.04
uname -a
Linux ShadyLappyMKII 2.6.24-15-generic #1 SMP Tue Apr 8 00:33:51 UTC 2008 i686 GNU/Linux
sudo lspci -vvnn (for the TV Tuner card)
...
06:00.0 Multimedia controller [0480]: Philips Semiconductors Unknown device [1131:7160] (rev 03)
Subsystem: Creatix Polymedia GmbH Unknown device [16be:0034]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <256ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <4us, L1 <64us
Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information
sudo lsusb -v (for the remote control receiver)
...
Bus 004 Device 002: ID 0bc7:0006 X10 Wireless Technology, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0bc7 X10 Wireless Technology, Inc.
idProduct 0x0006
bcdDevice 1.00
iManufacturer 1 X10 WTI
iProduct 2 RF receiver
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
...
Complete output from lspci -vvnn and lsusb -v, as well as dmesg output follows.
To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/215624/+subscriptions
