kernel-packages team mailing list archive

[didi_X8 <1327670@xxxxxxxxxxxxxxxxxx>]

Public bug reported:

Fresh 14.04 install on a Packard Bell Notebook.

WiFi device:
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8192SE Wireless LAN Controller (rev 10)

rtl8192se kernel module

If connecting to my home WiFi, it shows as connected, but there is no connectivity. I can't ping anything, not even the access point itself, althought DHCP settings are retrieved correctly.
iwconfig reports a rate stuck at 1Mb/s, although link quality is 70/70 and Signal level -28dBm.
If I set the rate to auto with "iwconfig wlan0 rate auto", it switches to 54 Mb/s (max the AP supports) and everything seems to work fine (I used it for few hours now, downloaded few 100 MB, mostly Ubuntu packages).

When connecting to an Android Hotspot, the problem doesn't occur, thus it seems to be AP dependent.
Difference in dmesg between connecting to the "bad" and the "good" AP:
When connecting to the bad one, it additionally shows this 2 lines:
[10961.059621] rtl8192se 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[10961.059626] rtl8192se 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
Don't know if that's related.

I've been connected to this AP with a lot of devices (mainly mobile)
without any issues.

The AP is a Linksys WRT54GL with Tomato 1.28 firmware.

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: linux-firmware 1.127.2
ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9
Uname: Linux 3.13.0-24-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.2
Architecture: amd64
Date: Sun Jun  8 02:20:45 2014
Dependencies:
 
InstallationDate: Installed on 2014-06-07 (0 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=de_DE
 TERM=xterm
 PATH=(custom, no user)
 LANG=de_DE.UTF-8
 SHELL=/bin/bash
SourcePackage: linux-firmware
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: linux-firmware (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: amd64 apport-bug trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-firmware in Ubuntu.
https://bugs.launchpad.net/bugs/1327670

Title:
  WiFi connects to AP, but doesn't work. Setting rate to auto fixes it.

Status in “linux-firmware” package in Ubuntu:
  New

Bug description:
  Fresh 14.04 install on a Packard Bell Notebook.

  WiFi device:
  02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8192SE Wireless LAN Controller (rev 10)

  rtl8192se kernel module

  If connecting to my home WiFi, it shows as connected, but there is no connectivity. I can't ping anything, not even the access point itself, althought DHCP settings are retrieved correctly.
  iwconfig reports a rate stuck at 1Mb/s, although link quality is 70/70 and Signal level -28dBm.
  If I set the rate to auto with "iwconfig wlan0 rate auto", it switches to 54 Mb/s (max the AP supports) and everything seems to work fine (I used it for few hours now, downloaded few 100 MB, mostly Ubuntu packages).

  When connecting to an Android Hotspot, the problem doesn't occur, thus it seems to be AP dependent.
  Difference in dmesg between connecting to the "bad" and the "good" AP:
  When connecting to the bad one, it additionally shows this 2 lines:
  [10961.059621] rtl8192se 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
  [10961.059626] rtl8192se 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
  Don't know if that's related.

  I've been connected to this AP with a lot of devices (mainly mobile)
  without any issues.

  The AP is a Linksys WRT54GL with Tomato 1.28 firmware.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: linux-firmware 1.127.2
  ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9
  Uname: Linux 3.13.0-24-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.2
  Architecture: amd64
  Date: Sun Jun  8 02:20:45 2014
  Dependencies:
   
  InstallationDate: Installed on 2014-06-07 (0 days ago)
  InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  PackageArchitecture: all
  ProcEnviron:
   LANGUAGE=de_DE
   TERM=xterm
   PATH=(custom, no user)
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  SourcePackage: linux-firmware
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1327670/+subscriptions