kicad-developers team mailing list archive

[Milan Horák <stranger@...>]

Ok, here's my coversation with Igor (hope he would not mind) and I'm 
sending it to Henri too:

(17.6.2007 19:00:54) Milan Horák:
Do you have any idea how to improve it?

(17.6.2007 19:01:52) Igor Plyatov:
we work with schematic and with pcb (two elements)

(17.6.2007 19:02:52) Milan Horák:
So ...

(17.6.2007 19:03:21) Igor Plyatov:
schematic element not similar to real and back element is unnecessary

(17.6.2007 19:03:52) Milan Horák:
So ... ...

(17.6.2007 19:04:26) Igor Plyatov:
and to attract people, we need more contrast and bright picture

(17.6.2007 19:06:23) Igor Plyatov:
if Henri Valta can make 2 or 3 variants - this will be very good

(17.6.2007 19:06:57) Igor Plyatov:
.

(17.6.2007 19:07:25) Igor Plyatov:
If not - so we can use this first logo :-(

(17.6.2007 19:07:42) Milan Horák:
I'll write to him...

(17.6.2007 19:08:10) Igor Plyatov:
but please do not use bad words about his work :-)

(17.6.2007 19:08:30) Milan Horák:
No way :-)

(17.6.2007 19:09:01) Igor Plyatov:
this is only my private opinion.

(17.6.2007 19:09:53) Milan Horák:
And ... I thin we should ask Jean-Pierre and other developers for their
opinions too...

(17.6.2007 19:10:04) Igor Plyatov:
yes.

(17.6.2007 19:11:07) Milan Horák:
And BTW Henri himself is opened for suggestions so we are on the good
path ...

(17.6.2007 19:11:25) Igor Plyatov:
good logo is very important for project flourishing.

(17.6.2007 19:11:35) Milan Horák:
Yep...

Milan

Dick Hollenbeck napsal(a):
> Thanks to Henri, who seems to have some talent.
>
> My opinion:
>
> Igor's idea is fine. What if you give Igor's feedback back to Henri, 
> and ask if he would give us some more choices. I like the 3d look.  
> If all choices were this high quality, then it seems it would be pretty 
> easy to make a choice. I think the schematic symbol should also be 3d 
> as well as the "the real part".
>
> Sometimes opinions are hard to find around here, so I offer mine so you 
> at least get some feedback.
>
> Dick
>
> > Hi all,
> >
> > so from a man named Henri Valta I received a logo proposition (including 
> > blender source data).
> >
> > Igor says we need logo more contrast and with only two parts. Each parts 
> > have to represent one of the two main parts of Kicad pcbnew and eeschema.
> >
> > So one has to be a schematic component and one has to be 'a real part'.
> >
> > Opinions and suggestions welcome.
> >
> > And also words from The Master Jean-Pierre ;-)
> >
> > Milan
> >
> > Milan Horák napsal(a):
> >   
> > > Hi all,
> > >
> > > for wiki site we need a KiCad logo.
> > >
> > > I think the best will be the same as KiCad icon, but I lack any 
> > > graphical talents so ...
> > >
> > > We can ask Inigo Zuluaga, creator of beautiful 3D icons on 
> > > http://www.kicadlib.org/ . Halo Inigo ... :-)
> > >
> > > Or any idea ?
> > >
> > > It has to be approx 120x120 px to place it on wiki pages.
> > >
> > > Milan
> > >
> > >
> > >  
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >     
> >
> >  
> > Yahoo! Groups Links
> >
> >
> >
> >   
> >
> > ------------------------------------------------------------------------