← Back to team overview

kicad-developers team mailing list archive

Re: wxGrid boolean changes

 

Hi Jeff,

This version works great in the library tables, but breaks the footprint
wizard table (it's no longer possible to check/uncheck booleans using mouse
or keyboard).
Unfortunately I don't have time to debug tonight, but can try tomorrow
unless you have an idea of what is wrong.

By the way, I was able to get scripting building on Mac, so if you let me
know where you are having troubles maybe I can give advice?

Thanks,
Jon

On Wed, Mar 21, 2018 at 7:28 PM, Jeff Young <jeff@xxxxxxxxx> wrote:

> OK, guys, here’s a modified-Jon-solution in GRID_TRICKS.
>
> Note that I can’t seem to build with Python on my Mac so the Footprint
> Wizard is totally untested (although it has, in theory, been updated to use
> GRID_TRICKS).
>
> Please let me know how it looks….
>
> Cheers,
> Jeff.
>
>
>
>
> > On 21 Mar 2018, at 21:49, Jeff Young <jeff@xxxxxxxxx> wrote:
> >
> > My change was in GRID_TRICKS, but doesn’t work very well.
> >
> > Jon’s was only in the Footprint Wizard, but seems to work better.
> >
> > I’m currently moving Jon’s to GRID_TRICKS.
> >
> >
> >> On 21 Mar 2018, at 21:48, Wayne Stambaugh <stambaughw@xxxxxxxxx> wrote:
> >>
> >> Does the footprint wizard use GRID_TRICKS?  In either case, we should
> roll these changes into GRID_TRICKS so it can be used everywhere we us
> boolean checkboxes in wxGrid.
> >>
> >> On 03/21/2018 05:38 PM, Jon Evans wrote:
> >>> It's already committed, if you use the footprint wizard, any of the
> boolean values in the parameters table use the new behavior
> >>> On Wed, Mar 21, 2018 at 5:31 PM, Wayne Stambaugh <stambaughw@xxxxxxxxx
> <mailto:stambaughw@xxxxxxxxx>> wrote:
> >>>   Jeff,
> >>>   I don't remember the outcome testing Jon's patch.  That was a few
> >>>   weeks ago so my old man memory is at work here.  I don't have that
> >>>   patch any longer so if Jon reposts it, I will test it on windows.
> >>>   Cheers,
> >>>   Wayne
> >>>   On 03/21/2018 05:07 PM, Jeff Young wrote:
> >>>       Hi Wayne,
> >>>       That sounds pretty similar to the bad behaviour I was trying to
> >>>       fix on Linux, so I’m guessing it’ll be the same.
> >>>       The native control on Mac does a fade-in when checked or
> >>>       unchecked, which I was trying to retain.  But it looks like
> >>>       we’ll have to go with something more like Jon’s idea (which only
> >>>       uses the native controls for rendering).
> >>>       I think you mentioned that Jon’s patch also had issues on
> >>>       Windows.  Do you remember what they were?
> >>>       Cheers,
> >>>       Jeff.
> >>>           On 21 Mar 2018, at 16:29, Wayne Stambaugh
> >>>           <stambaughw@xxxxxxxxx <mailto:stambaughw@xxxxxxxxx>
> >>>           <mailto:stambaughw@xxxxxxxxx <mailto:stambaughw@xxxxxxxxx>>>
> >>>           wrote:
> >>>           Jeff,
> >>>           This doesn't work on windows.  The first click works as
> >>>           expected where
> >>>           is selects the row and checks the checkbox.  The subsequent
> >>>           click
> >>>           selects the row and the next click behaves like two
> >>>           consecutive clicks
> >>>           which leave the checkbox in it's original state.  I will try
> >>>           to test
> >>>           this on linux tonight when I get home.
> >>>           Cheers,
> >>>           Wayne
> >>>           On 3/21/2018 10:15 AM, Jeff Young wrote:
> >>>               Oops, scratch that last one (it doesn’t even compile).
> >>>               Let’s try again:
> >>>                   On 21 Mar 2018, at 10:59, Jeff Young <jeff@xxxxxxxxx
> >>>                   <mailto:jeff@xxxxxxxxx> <mailto:jeff@xxxxxxxxx
> >>>                   <mailto:jeff@xxxxxxxxx>>
> >>>                   <mailto:jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>>>
> wrote:
> >>>                   Hi Jon,
> >>>                   Could you try this one out on Linux?  (It should be
> >>>                   active for the
> >>>                   library tables, but not the footprint wizard.)
> >>>                   Thanks,
> >>>                   Jeff.
> >>>                   <0003-Don-t-make-users-click-
> twice-to-toggle-a-wxGrid-chec.patch>
> >>>                       On 20 Mar 2018, at 13:49, Jon Evans
> >>>                       <jon@xxxxxxxxxxxxx <mailto:jon@xxxxxxxxxxxxx>
> >>>                       <mailto:jon@xxxxxxxxxxxxx
> >>>                       <mailto:jon@xxxxxxxxxxxxx>>
> >>>                       <mailto:jon@xxxxxxxxxxxxx
> >>>                       <mailto:jon@xxxxxxxxxxxxx>>> wrote:
> >>>                       I haven't started on it yet, feel free to do so
> >>>                       if you want and have
> >>>                       time.
> >>>                       On Tue, Mar 20, 2018, 09:48 Jeff Young
> >>>                       <jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>
> >>>                       <mailto:jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>>
> >>>                       <mailto:jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>>>
> >>>                       wrote:
> >>>                           Hi Jon,
> >>>                           Do you want me to take this up, or are you
> >>>                       working on it?
> >>>                           Cheers,
> >>>                           Jeff.
> >>>                               On 15 Mar 2018, at 12:20, Jon Evans
> >>>                           <jon@xxxxxxxxxxxxx
> >>>                           <mailto:jon@xxxxxxxxxxxxx>
> >>>                           <mailto:jon@xxxxxxxxxxxxx
> >>>                           <mailto:jon@xxxxxxxxxxxxx>>
> >>>                               <mailto:jon@xxxxxxxxxxxxx
> >>>                           <mailto:jon@xxxxxxxxxxxxx>>> wrote:
> >>>                               Yes, you'd need python scripting turned
> on.
> >>>                               I will try to make a version that
> >>>                           applies to the library tables
> >>>                               for testing.
> >>>                               -Jon
> >>>                               On Thu, Mar 15, 2018, 07:32 Jeff Young
> >>>                           <jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>
> >>>                           <mailto:jeff@xxxxxxxxx <mailto:
> jeff@xxxxxxxxx>>
> >>>                               <mailto:jeff@xxxxxxxxx
> >>>                           <mailto:jeff@xxxxxxxxx>>> wrote:
> >>>                                   I tried to test out your version,
> >>>                           Jon, but I don’t have a
> >>>                                   Footprint Wizard.  (Is that because
> >>>                           I have scripting turned
> >>>                                   off?)
> >>>                                       On 15 Mar 2018, at 01:16, Jon
> >>>                               Evans <jon@xxxxxxxxxxxxx
> >>>                               <mailto:jon@xxxxxxxxxxxxx>
> >>>                               <mailto:jon@xxxxxxxxxxxxx
> >>>                               <mailto:jon@xxxxxxxxxxxxx>>
> >>>                                       <mailto:jon@xxxxxxxxxxxxx
> >>>                               <mailto:jon@xxxxxxxxxxxxx>>> wrote:
> >>>                                       I gave it a try and there is
> >>>                               some strange behavior on Linux :-(
> >>>                                       Clicks on the checkboxes seem to
> >>>                               sometimes get handled
> >>>                                       twice so the box quickly toggles
> >>>                               between states.
> >>>                                       So, I don't think it should be
> >>>                               merged as-is.
> >>>                                       Can you guys confirm that the
> >>>                               behavior is good from my
> >>>                                       version (as implemented in the
> >>>                               footprint wizard parameters
> >>>                                       table) on Mac/Windows?
> >>>                                       If so, I will work on a general
> >>>                               solution based on that
> >>>                                       which can be used with the
> >>>                               GRID_TRICKS mixin.
> >>>                                       -Jon
> >>>                                       On Wed, Mar 14, 2018 at 4:20 PM,
> >>>                               Jeff Young <jeff@xxxxxxxxx
> >>>                               <mailto:jeff@xxxxxxxxx>
> >>>                               <mailto:jeff@xxxxxxxxx
> >>>                               <mailto:jeff@xxxxxxxxx>>
> >>>                                       <mailto:jeff@xxxxxxxxx
> >>>                               <mailto:jeff@xxxxxxxxx>>> wrote:
> >>>                                           Yep, only tested on OSX.
> >>>                                           Patch attached.
> >>>                                           Cheers,
> >>>                                           Jeff.
> >>>                                               On 14 Mar 2018, at
> >>>                                   19:56, Wayne Stambaugh
> >>>                                               <stambaughw@xxxxxxxxx
> >>>                                   <mailto:stambaughw@xxxxxxxxx>
> >>>                                   <mailto:stambaughw@xxxxxxxxx
> >>>                                   <mailto:stambaughw@xxxxxxxxx>>
> <mailto:stambaughw@xxxxxxxxx
> >>>                                   <mailto:stambaughw@xxxxxxxxx>>>
> >>>                                               wrote:
> >>>                                               I'm assuming you only
> >>>                                   tested this on macos correct?
> >>>                                               If so, please
> >>>                                               submit a patch so we can
> >>>                                   test in on windows and
> >>>                                               linux.  I think the risk
> >>>                                               is low but it shouldn't
> >>>                                   take long to test it.  If
> >>>                                               there aren't any
> >>>                                               issues, then it can be
> >>>                                   merged so Jon can use and we
> >>>                                               wont have to rework
> >>>                                               any code in v6.
> >>>                                               On 3/14/2018 3:52 PM,
> >>>                                   Jeff Young wrote:
> >>>                                                   @Wayne, any opinion
> >>>                                       on this one?  Should I merge it
> >>>                                                   or play it safe and
> >>>                                                   leave it in 6.0?
> >>>                                                       On 14 Mar 2018,
> >>>                                           at 14:12, Jeff Young
> >>>                                           <jeff@xxxxxxxxx
> >>>                                           <mailto:jeff@xxxxxxxxx>
> >>>                                           <mailto:jeff@xxxxxxxxx
> >>>                                           <mailto:jeff@xxxxxxxxx>>
> >>>                                                       <mailto:
> jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>>
> >>>                                                       <mailto:
> jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>>> wrote:
> >>>                                                       IIRC, it was
> >>>                                           tricky to get right because
> >>>                                           you can’t
> >>>                                                       fire it when the
> >>>                                                       cell *does* have
> >>>                                           focus or wxWidgets gets
> >>>                                           itself tied
> >>>                                                       in knots.  (It
> >>>                                                       turns out that’s
> >>>                                           OK because when it does have
> >>>                                           focus
> >>>                                                       wxWidgets toggles
> >>>                                                       it with a
> >>>                                           single-click anyway.)
> >>>                                                       It was also a
> >>>                                           bit tricky around reference
> >>>                                           counting.
> >>>                                                       The current
> >>>                                           version has had a decent
> >>>                                           amount of
> >>>                                                       testing in my 6.0
> >>>                                                       branch, so it’s
> >>>                                           good-to-go on Mac.  But
> >>>                                           after the
> >>>                                                       teething
> troubles I
> >>>                                                       was hesitant to
> >>>                                           merge it given possible
> >>>                                           issues on
> >>>                                                       other platforms.
> >>>                                                       I do think we
> >>>                                           should add (2).  I'm happy
> >>>                                           for you to
> >>>                                                       tackle it, Jon.
> >>>                                                       (I’m also happy
> >>>                                           to merge my version to 5.0
> >>>                                           first if
> >>>                                                       others think it’s
> >>>                                                       worth the risk.)
> >>>                                                       Cheers,
> >>>                                                       Jeff
> >>>                                                           On 14 Mar
> >>>                                               2018, at 14:03, Jon Evans
> >>>                                                           <
> jon@xxxxxxxxxxxxx <mailto:jon@xxxxxxxxxxxxx> <mailto:jon@xxxxxxxxxxxxx
> <mailto:jon@xxxxxxxxxxxxx>><mailto:jon@xxxxxxxxxxxxx <mailto:
> jon@xxxxxxxxxxxxx>>
> >>>                                                           <mailto:
> jon@xxxxxxxxxxxxx <mailto:jon@xxxxxxxxxxxxx>>> wrote:
> >>>                                                           Thanks Jeff,
> >>>                                               it doesn't look like
> >>>                                               that big a change
> >>>                                                           but if you
> think
> >>>                                                           it should
> >>>                                               wait I don't feel
> >>>                                               strongly, except that
> >>>                                                           it might make
> >>>                                                           maintenance
> >>>                                               more annoying if we have
> one
> >>>
>  implementation in 5.0 and
> >>>                                                           one in 6.0.
> >>>                                                           Anyone else
> >>>                                               have opinions on this?
> >>>                                                           I think (2)
> >>>                                               should be added to Jeff's
> >>>
>  implementation and I can
> >>>                                                           probably
> >>>                                               handle that unless you
> >>>                                               want to, Jeff
> >>>                                                           -Jon
> >>>                                                           On Wed, Mar
> >>>                                               14, 2018 at 9:58 AM,
> >>>                                               Jeff Young
> >>>                                                           <
> jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx> <mailto:jeff@xxxxxxxxx <mailto:
> jeff@xxxxxxxxx>><mailto:jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>>
> >>>                                                           <mailto:
> jeff@xxxxxxxxx <mailto:jeff@xxxxxxxxx>>> wrote:
> >>>                                                              Hi Jon,
> >>>                                                              I
> >>>                                               implemented (1), (3) and
> >>>                                               (4) in 6.0.  It was
> >>>                                                           tweaky
> >>>                                               enough that
> >>>                                                              I don’t
> >>>                                               recommend it for 5.0
> >>>                                               (but I don’t fee
> >>>                                                           strongly).
> >>>                                                              You can
> >>>                                               see my implementation
> here:
> >>>
> https://git.launchpad.net/~jeyjey/kicad/commit/?h=6.0&id=
> 7dda85fdae21f162bd7413fdceb16e49698f31bf
> >>>                                               <
> https://git.launchpad.net/~jeyjey/kicad/commit/?h=6.0&id=
> 7dda85fdae21f162bd7413fdceb16e49698f31bf>
> >>>                                                              <
> https://git.launchpad.net/~jeyjey/kicad/commit/?h=6.0&id=
> 7dda85fdae21f162bd7413fdceb16e49698f31bf <https://git.launchpad.net/~
> jeyjey/kicad/commit/?h=6.0&id=7dda85fdae21f162bd7413fdceb16e49698f31bf>>.
> >>>                                                              Cheers,
> >>>                                                              Jeff.
> >>>                                                                  On 14
> >>>                                                   Mar 2018, at 13:50,
> >>>                                                   Jon Evans
> >>>                                                               <
> jon@xxxxxxxxxxxxx <mailto:jon@xxxxxxxxxxxxx> <mailto:jon@xxxxxxxxxxxxx
> <mailto:jon@xxxxxxxxxxxxx>><mailto:jon@xxxxxxxxxxxxx <mailto:
> jon@xxxxxxxxxxxxx>>
> >>>
> <mailto:jon@xxxxxxxxxxxxx <mailto:jon@xxxxxxxxxxxxx>>> wrote:
> >>>                                                                  Hi
> all,
> >>>                                                                  I
> >>>                                                   recently (2f86b497)
> >>>                                                   changed the behavior
> of
> >>>                                                               the
> >>>                                                   wxGrid in the
> >>>
> footprint wizard dialog to fix some issues with
> >>>                                                               boolean
> >>>
> (checkbox) parameters.
> >>>                                                                  The
> >>>                                                   default behavior
> >>>                                                   from wxWidgets (at
> least
> >>>                                                               in 3.0)
> >>>                                                   is buggy
> >>>                                                                  in
> >>>                                                   that the update
> >>>                                                   events don't get
> >>>                                                   sent out
> >>>                                                               when
> >>>                                                   you'd expect
> >>>                                                                  from
> >>>                                                   the
> >>>                                                   wxGridCellBoolEditor.
> >>>                                                                  I
> >>>                                                   have found that I
> >>>                                                   can get behavior
> >>>                                                   that makes
> >>>                                                               sense to
> >>>                                                   me by
> >>>
> overriding event handlers for the grid itself,
> >>>                                                               but I'd
> >>>                                                   like to
> >>>                                                                  make
> >>>                                                   a more generic fix
> >>>                                                   that can be easily
> >>>                                                               portable
> >>>                                                   to other
> >>>
> grids, since we will likely have more places to
> >>>                                                               use
> >>>                                                   checkboxes
> >>>                                                                  in
> >>>                                                   grids in the future.
> >>>
> Before I go too far down that path, I wanted to
> >>>                                                               check
> >>>                                                   that the
> >>>                                                                  new
> >>>                                                   footprint wizard
> >>>                                                   grid behavior
> >>>                                                   matches with
> >>>
>  everyone's
> >>>
> expectations for how it should work:
> >>>                                                                  1)
> >>>                                                   you can toggle the
> >>>                                                   checkbox on/off with
> a
> >>>                                                               single
> >>>                                                   left click
> >>>                                                                  2)
> >>>                                                   you can also toggle
> >>>                                                   with the spacebar if
> the
> >>>                                                               cell is
> >>>                                                   highlighted
> >>>                                                                  3)
> >>>                                                   nothing happens for
> >>>                                                   double click / right
> >>>                                                               click /
> etc.
> >>>                                                                  4) if
> >>>                                                   you click inside the
> >>>                                                   cell (but outside
> >>>                                                               the
> >>>                                                   checkbox) the
> >>>
> checkbox is also toggled for convenience
> >>>
> Thanks,
> >>>                                                                  Jon
> >>>
> _______________________________________________
> >>>
> Mailing
> >>>                                                               list:
> >>>
> https://launchpad.net/~kicad-developers
> >>>                                                   <
> https://launchpad.net/~kicad-developers>
> >>>                                                                  <
> https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-
> developers>>
> >>>                                                                  Post
> to
> >>>                                                                   :
> >>>
> kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>                                                   <mailto:
> kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >>>                                                   <mailto:
> kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>                                                   <mailto:
> kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >>>                                                               <mailto:
> kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>
> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>
> Unsubscribe
> >>>                                                               :
> >>>
> https://launchpad.net/~kicad-developers
> >>>                                                   <
> https://launchpad.net/~kicad-developers>
> >>>                                                                  <
> https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-
> developers>>
> >>>                                                                  More
> >>>                                                   help   :
> >>>
> https://help.launchpad.net/ListHelp
> >>>                                                   <
> https://help.launchpad.net/ListHelp>
> >>>                                                                  <
> https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>>
> >>>
>  _______________________________________________
> >>>                                                       Mailing list:
> >>>
> https://launchpad.net/~kicad-developers
> >>>                                           <
> https://launchpad.net/~kicad-developers>
> >>>                                                       Post to     :
> >>>                                           kicad-developers@lists.
> launchpad.net
> >>>                                           <mailto:kicad-developers@
> lists.launchpad.net>
> >>>                                           <mailto:kicad-developers@
> lists.launchpad.net
> >>>                                           <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>                                                       <mailto:
> kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>                                                       <mailto:
> kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>                                                       Unsubscribe :
> >>>
> https://launchpad.net/~kicad-developers
> >>>                                           <
> https://launchpad.net/~kicad-developers>
> >>>                                                       More help   :
> >>>                                           https://help.launchpad.net/
> ListHelp
> >>>                                           <https://help.launchpad.net/
> ListHelp>
> >>>
>  _______________________________________________
> >>>                                                   Mailing list:
> >>>                                       https://launchpad.net/~kicad-
> developers
> >>>                                       <https://launchpad.net/~kicad-
> developers>
> >>>                                                   Post to     :
> >>>                                       kicad-developers@lists.
> launchpad.net
> >>>                                       <mailto:kicad-developers@
> lists.launchpad.net>
> >>>                                       <mailto:kicad-developers@
> lists.launchpad.net
> >>>                                       <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>                                                   <mailto:
> kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>                                                   Unsubscribe :
> >>>                                       https://launchpad.net/~kicad-
> developers
> >>>                                       <https://launchpad.net/~kicad-
> developers>
> >>>                                                   More help   :
> >>>                                       https://help.launchpad.net/
> ListHelp
> >>>                                       <https://help.launchpad.net/
> ListHelp>
> >>>
>  _______________________________________________
> >>>                                               Mailing list:
> >>>                                   https://launchpad.net/~kicad-
> developers
> >>>                                   <https://launchpad.net/~kicad-
> developers>
> >>>                                               Post to     :
> >>>                                   kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>                                   <mailto:kicad-developers@
> lists.launchpad.net>
> >>>                                   <mailto:kicad-developers@
> lists.launchpad.net
> >>>                                   <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>                                               <mailto:
> kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>                                               Unsubscribe :
> >>>                                   https://launchpad.net/~kicad-
> developers
> >>>                                   <https://launchpad.net/~kicad-
> developers>
> >>>                                               More help   :
> >>>                                   https://help.launchpad.net/ListHelp
> >>>                                   <https://help.launchpad.net/ListHelp
> >
> >>>
>  _______________________________________________
> >>>                                           Mailing
> >>>                               list:https://launchpad.net/~
> kicad-developers
> >>>                               <https://launchpad.net/~kicad-developers
> >
> >>>                                           Post to
>                :kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>                               <mailto:kicad-developers@
> lists.launchpad.net>
> >>>                               <mailto:kicad-developers@
> lists.launchpad.net
> >>>                               <mailto:kicad-developers@
> lists.launchpad.net>>
> >>>                                           <mailto:kicad-developers@
> lists.launchpad.net <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >>>                                           Unsubscribe
> >>>                               :https://launchpad.net/~kicad-developers
> >>>                               <https://launchpad.net/~kicad-developers
> >
> >>>                                           More help
>                :https://help.launchpad.net/ListHelp
> >>>                               <https://help.launchpad.net/ListHelp>
> >>>                   _______________________________________________
> >>>                   Mailing list:https://launchpad.net/~kicad-developers
> >>>                   <https://launchpad.net/~kicad-developers>
> >>>                   Post to     :kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>                   <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >>>                   <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>                   <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >>>                   <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>                   <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >>>                   Unsubscribe :https://launchpad.net/~kicad-developers
> >>>                   <https://launchpad.net/~kicad-developers>
> >>>                   More help   :https://help.launchpad.net/ListHelp
> >>>                   <https://help.launchpad.net/ListHelp>
> >>>               _______________________________________________
> >>>               Mailing list:https://launchpad.net/~kicad-developers
> >>>               <https://launchpad.net/~kicad-developers>
> >>>               Post to     :kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>               <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >>>               <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>               <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >>>               Unsubscribe :https://launchpad.net/~kicad-developers
> >>>               <https://launchpad.net/~kicad-developers>
> >>>               More help   :https://help.launchpad.net/ListHelp
> >>>               <https://help.launchpad.net/ListHelp>
> >>>           _______________________________________________
> >>>           Mailing list:https://launchpad.net/~kicad-developers
> >>>           <https://launchpad.net/~kicad-developers>
> >>>           Post to     :kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>           <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >>>           <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>           <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >>>           Unsubscribe :https://launchpad.net/~kicad-developers
> >>>           <https://launchpad.net/~kicad-developers>
> >>>           More help   :https://help.launchpad.net/ListHelp
> >>>           <https://help.launchpad.net/ListHelp>
> >>>   _______________________________________________
> >>>   Mailing list: https://launchpad.net/~kicad-developers
> >>>   <https://launchpad.net/~kicad-developers>
> >>>   Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >>>   <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >>>   Unsubscribe : https://launchpad.net/~kicad-developers
> >>>   <https://launchpad.net/~kicad-developers>
> >>>   More help   : https://help.launchpad.net/ListHelp
> >>>   <https://help.launchpad.net/ListHelp>
> >
> >
> > _______________________________________________
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help   : https://help.launchpad.net/ListHelp
>
>
> ...
>
> [Message clipped]

Follow ups

References