openstack team mailing list archive

[Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx>]

Daneyon,

 Thank you for your time! I'll check it!

 I read that guide from Cisto once... Too complex.

 I also, tried the following guides too, appears to be like the one from
Cisco:


https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/stable/GRE/OpenStack_Folsom_Install_Guide_WebVersion.rst

 and:

https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/GRE/2NICs/OpenStack_Folsom_Install_Guide_WebVersion.rst


 Anyway, at first, I do not want L3 or GRE. Only the most basic setup (Flat
/ L2).

 Do you know if my `controller+network node' server eth0 needs to be
promisc?

Tks!
Thiago


On 13 March 2013 00:49, Daneyon Hansen (danehans) <danehans@xxxxxxxxx>wrote:

>
>  Make sure the quantum-dhcp and l3 agents are running and properly
> configured.  It sounds like either the q-dhcp agent is not functioning or
> connectivity between the dhcp agent and vm is not functioning.  If using
> GRE tunnels, test connectivity between the tunnel endpoints.  You should
> also see the IP's of your tunnel peers in ovs-vsctl show.  If your instance
> spawns successfully, console into it and manually assign an IP and ping the
> q-l3-agent and q-dhcp agent.  You can follow this guide for deploying
> Quantum with OpenvSwitch using GRE tunnels:
>
>
> http://docwiki.cisco.com/wiki/Cisco_OpenStack_Edition:_Folsom_Manual_Install
>
>  Regards,
> Daneyon Hansen
>
>   From: Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx>
> Date: Tuesday, March 12, 2013 8:14 PM
> To: "openstack@xxxxxxxxxxxxxxxxxxx" <openstack@xxxxxxxxxxxxxxxxxxx>, "
> openstack-operators@xxxxxxxxxxxxxxxxxxx" <
> openstack-operators@xxxxxxxxxxxxxxxxxxx>
> Subject: Re: [Openstack-operators] Help with simplest Quantum setup
> possible...
>
>   Well,
>
>   Just for the record, I'll stick with Quatum + OpenvSwtich... Someone on
> IRC told me that it is the best way to go with Quantum.
>
>   I'm still needing help to set it up (Single Flat / multi=false, still
> the same simplest topology).
>
>   OpenvSwitch is already working, bridges `br-int' and `br-eth0'
> created...
>
>   My main problem, I think, is that my Instances doesn't get an IP (they
> supposed to be at 10.33.14.X/24).
>
>   Everything else seems to be working as expected, no apparent errors on
> the logs... quantum net-create / subnet-create worked...
>
>   I appreciate any help, tips or docs!
>
>  Best!
> Thiago
>
>
> On 12 March 2013 23:34, Martinx - ジェームズ <thiagocmartinsc@xxxxxxxxx> wrote:
>
>> Hi!
>>
>>   Sorry about the double posting... I need help!     :-P
>>
>>   I'm trying, without any kind of success, to deploy OpenStack with
>> Quantum on its simplest scenario, I think, which is `Single Flat' with
>> `Linux Bridge' plugin.
>>
>>   My topology is:
>>
>>   1 firewall with 2 ethX (eth0 public, eth1 10.32.14.1 and 10.33.14.1)
>>  1 controller with 1 eth0 (10.32.14.232/24 gateway 10.32.14.1)
>>  1 node with 1 eth0 (10.32.14.234/24 gateway 10.32.14.1)
>>
>>   Instances Network:
>>  10.33.14.0/24 (Instances gateway must be 10.33.14.1, same router of the
>> physical servers above, NOT its own host hypervisor).
>>
>>   I'm trying this:
>>
>>
>> http://docs.openstack.org/trunk/openstack-network/admin/content/demo_flat_installions.html- doesn't work... Even enabling OpenvSwith (but I don't want it for now,
>> only Quantum instead of nova-network, with Linux Bridge for the sake of
>> simplicity).
>>
>>   The following guide help me a lot (with Nova Network everything is
>> fine): http://openstack-folsom-install-guide.readthedocs.org/en/latest/- I'm trying to follow it, by replacing nota-network instructions, for
>> Quantum instructions but, doesn't work...
>>
>>   Any docs or tips?
>>
>>   NOTE: I do not want any kind of NAT (like nova-network multi=true) or
>> `Floating IPs' within my Cloud Computing environment.
>>
>>  Thanks!
>> Thiago
>>
>
>