remote-help-assistant team mailing list archive

[Sebastian Spiess <sebastian.spiess@xxxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi all,

I had another go at my mums installation.

Spec is Dell notebook running xubuntu 7.10 her router is one supplied by the broadband company (AAPT)

this is what I can find on the settings page of the router
Product Name:    SpeedTouch 5x6
Serial Number:    CP0704DTR09
Software Release:    6.1.0.5
Software Variant:    AQ
Boot Loader Version:    1.0.6
Product Code:    3594265A
Board Name:    BANT-V

UPnP: Enabled


yes it says UPnP enabled but remote-help does not recognise it?!

I added the ports 2112 manually to the routers routing table.

then I thought maybe I should tick the "Automatically manage firewall" and this was when the strange thing happened

the first click resulted in the tick box showing for a second a horizontal line and then reverted back to be blank.
at the same time the following lines appear on the CLI

	~$ remote-help-assistant
	~$ sh: arith: syntax error: "succeeded+1"
	sh: arith: syntax error: "succeeded+1"

the next click brings up the tick but no sudo password is requested

attached is a log file from this procedure

//////////////////////////////////

Fri, 10 Oct 2008 07:09:43 +0000 - Starting with home_dir: /home/bernita
Fri, 10 Oct 2008 07:09:43 +0000 - md5sum information: 1f28520ad993cfa67319c568f9505bdc, size: 125499 bytes
Fri, 10 Oct 2008 07:09:44 +0000 - Sent 0 == get_ip_address_description
Fri, 10 Oct 2008 07:09:44 +0000 - Running command 0 = get_ip_address_description
Fri, 10 Oct 2008 07:09:45 +0000 - Responding to 0
Fri, 10 Oct 2008 07:09:45 +0000 - Finished command 0 = get_ip_address_description
Fri, 10 Oct 2008 07:09:46 +0000 - Preparing page 1 - Share or connect? (2 of 7)
Fri, 10 Oct 2008 07:09:46 +0000 - Sent 1 == get_ip_address_description
Fri, 10 Oct 2008 07:09:46 +0000 - Done preparing page.
Fri, 10 Oct 2008 07:09:46 +0000 - Running command 1 = get_ip_address_description
Fri, 10 Oct 2008 07:09:46 +0000 - Responding to 1
Fri, 10 Oct 2008 07:09:46 +0000 - Finished command 1 = get_ip_address_description
Fri, 10 Oct 2008 07:09:47 +0000 - Preparing page 2 - General information (3 of 7)
Fri, 10 Oct 2008 07:09:47 +0000 - Sent 2 == cancel_current_job
Fri, 10 Oct 2008 07:09:47 +0000 - Done preparing page.
Fri, 10 Oct 2008 07:09:47 +0000 - Running command 2 = cancel_current_job
Fri, 10 Oct 2008 07:09:47 +0000 - Finished command 2 = cancel_current_job
Fri, 10 Oct 2008 07:09:50 +0000 - Sent 3 == cancel_current_job
Fri, 10 Oct 2008 07:09:50 +0000 - Sent 4 == None
Fri, 10 Oct 2008 07:09:50 +0000 - Running command 3 = cancel_current_job
Fri, 10 Oct 2008 07:09:50 +0000 - Finished command 3 = cancel_current_job
) ; tried=$((tried+1)) ; for IPTABLES in /sbin/iptables /sbin/ip6tables; do \$IPTABLES -I OUTPUT -o lo -j ACCEPT &&
succeeded=$((succeeded+1)) ; tried=$((tried+1)) ; \$IPTABLES -I INPUT  -i lo -j ACCEPT && succeeded=$((succeeded+1)) ;
tried=$((tried+1)) ; \$IPTABLES -I OUTPUT -p tcp --sport 2112 -j ACCEPT && succeeded=$((succeeded+1)) ; tried=$((tried+1))
; \$IPTABLES -I INPUT  -p tcp --dport 2112 -j ACCEPT && succeeded=$((succeeded+1)) ; tried=$((tried+1)) ; done ; if test
$tried -eq $succeeded ; then echo Remote help succeeded ; else echo Remote help failed: $succeeded/$tried ; fi
{} tmpfile: None Fri, 10 Oct 2008 07:07:39 +0000 - Responding to 2
Fri, 10 Oct 2008 07:07:39 +0000 - Finished command 2 = set_firewall
Fri, 10 Oct 2008 07:07:46 +0000 - Sent 3 == set_firewall
Fri, 10 Oct 2008 07:07:46 +0000 - Running command 3 = set_firewall
Fri, 10 Oct 2008 07:07:46 +0000 - Responding to 3
Fri, 10 Oct 2008 07:07:46 +0000 - Finished command 3 = set_firewall
Fri, 10 Oct 2008 07:07:49 +0000 - Preparing page 1 - Share or connect? (2 of 7)
Fri, 10 Oct 2008 07:07:49 +0000 - Sent 4 == get_ip_address_description
Fri, 10 Oct 2008 07:07:49 +0000 - Done preparing page.
Fri, 10 Oct 2008 07:07:49 +0000 - Running command 4 = get_ip_address_description
Fri, 10 Oct 2008 07:07:49 +0000 - Responding to 4
Fri, 10 Oct 2008 07:07:49 +0000 - Finished command 4 = get_ip_address_description
Fri, 10 Oct 2008 07:07:50 +0000 - Preparing page 0 - Remote help assistant
Fri, 10 Oct 2008 07:07:50 +0000 - Done preparing page.
Fri, 10 Oct 2008 07:07:51 +0000 - Preparing page 1 - Share or connect? (2 of 7)
Fri, 10 Oct 2008 07:07:51 +0000 - Sent 5 == get_ip_address_description
Fri, 10 Oct 2008 07:07:51 +0000 - Done preparing page.
Fri, 10 Oct 2008 07:07:51 +0000 - Running command 5 = get_ip_address_description
Fri, 10 Oct 2008 07:07:51 +0000 - Responding to 5
Fri, 10 Oct 2008 07:07:51 +0000 - Finished command 5 = get_ip_address_description
Fri, 10 Oct 2008 07:07:52 +0000 - Preparing page 2 - General information (3 of 7)
Fri, 10 Oct 2008 07:07:52 +0000 - Sent 6 == cancel_current_job
Fri, 10 Oct 2008 07:07:52 +0000 - Done preparing page.
Fri, 10 Oct 2008 07:07:52 +0000 - Running command 6 = cancel_current_job
Fri, 10 Oct 2008 07:07:52 +0000 - Finished command 6 = cancel_current_job
Fri, 10 Oct 2008 07:07:53 +0000 - Sent 7 == set_firewall
Fri, 10 Oct 2008 07:07:53 +0000 - Running command 7 = set_firewall
iptables error:
/usr/bin/gksudo --description "Remote help assistant" --  /bin/sh -c "tried=0 ; succeeded=0 ; for IPTABLES in
/sbin/iptables /sbin/iptables /sbin/ip6tables /sbin/ip6tables /sbin/iptables; do \$IPTABLES -D OUTPUT 1 &&
succeeded=$((succeeded+1)) ; tried=$((tried+1)) ; \$IPTABLES -D INPUT  1 && succeeded=$((succeeded+1)) ; tried=$((tried+1))
; done ; if test $tried -eq $succeeded ; then echo Remote help succeeded ; else echo Remote help failed: $succeeded/$tried ; fi
{} tmpfile: None Fri, 10 Oct 2008 07:07:53 +0000 - Responding to 7
Fri, 10 Oct 2008 07:07:53 +0000 - Finished command 7 = set_firewall
Fri, 10 Oct 2008 07:07:58 +0000 - Sent 8 == set_firewall
Fri, 10 Oct 2008 07:07:58 +0000 - Running command 8 = set_firewall
Fri, 10 Oct 2008 07:07:58 +0000 - Responding to 8
Fri, 10 Oct 2008 07:07:58 +0000 - Finished command 8 = set_firewall
Fri, 10 Oct 2008 07:08:08 +0000 - Sent 9 == cancel_current_job
Fri, 10 Oct 2008 07:08:08 +0000 - Sent 10 == None
Fri, 10 Oct 2008 07:08:08 +0000 - Running command 9 = cancel_current_job
Fri, 10 Oct 2008 07:08:08 +0000 - Finished command 9 = cancel_current_job
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFI8ydfMuBzgG5z7F8RAv6ZAJ0eR6nYLBASbNuTZdizPvXkVOTjeQCeK+cm
vI10O/c06X5V1btN1rY9uwo=
=aNFp
-----END PGP SIGNATURE-----