kernel-packages team mailing list archive

[deivid <1357550@xxxxxxxxxxxxxxxxxx>]

Public bug reported:

After upgrading from 12.04 to 14.04, I have no internet anymore. It
seems like a problem with the network card driver, but I'm not sure.
This is some information.

$ lsb_release -rd
Description:	Ubuntu 14.04.1 LTS
Release:	14.04

$ uname -r
3.13.0-34-generic

$ sudo lspci -vnvn | grep Ethernet -A12
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02)
  Subsystem: Foxconn Internation, Inc. Device [105b:0c9e]
  Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  Status: Cap+ 66MHz UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  Latency: 0
  Interrupt: pin A routed to IRQ19
  Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=128]
  Region 1: I/O ports at fe00 [size=128]
  Capabilities: [40] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  Kernel driver in use: sis190

$ dmesg | grep sis190
[    1.400322] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[    1.400550] sis190: 0000:00:04.0: Read MAC address from EEPROM
[    1.400553] sis190: 0000:00:04.0: Error EEPROM read 0lsblsb_
[    1.400556] sis190: 0000:00:04.0: Read MAC address from APC
[    1.476036] sis190: 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1
[    1.988040] sis190: 0000:00:04.0: Usings transceiver at address 1 as default
[    2.020319] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f840a000 (IRQ: 19), 00:1c:25:4d:d0:fc
[    2.020323] sis190 0000:00:04.0 eth0: RGMII mode.
[    2.400332] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
[   34.208035] sis190 0000:00:04.0 eth0: mii ext = 0000
[   34.232047] sis190 0000:00:04.0 eth0: mii lpa=45e1 adv=01e1 exp=0007
[   34.232056] sis190 0000:00:04.0 eth0: link on 100 Mbps Full Duplex mode
[  202.712030] sis190 0000:00:04.0 eth0: auto-negotiating...

Let me know what other info I can provide...

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New

** Description changed:

- After upgrading from 12.04 to 14.04, I have no internet anymore. It seems like a problem with the network card driver, but I'm not sure. This is some information.
+ After upgrading from 12.04 to 14.04, I have no internet anymore. It
+ seems like a problem with the network card driver, but I'm not sure.
+ This is some information.
+ 
  $ lsb_release -rd
  Description:	Ubuntu 14.04.1 LTS
  Release:	14.04
  
  $ uname -r
  3.13.0-34-generic
  
  $ sudo lspci -vnvn | grep Ethernet -A12
  00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02)
-                Subsystem: Foxconn Internation, Inc. Device [105b:0c9e]
-                Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
-                Status: Cap+ 66MHz UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
-                Latency: 0
-                Interrupt: pin A routed to IRQ19
-                Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=128]
-                Region 1: I/O ports at fe00 [size=128]
-                Capabilities: [40] Power Management version 2
-                              Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
-                              Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-                Kernel driver in use: sis190
+   Subsystem: Foxconn Internation, Inc. Device [105b:0c9e]
+   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
+   Status: Cap+ 66MHz UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
+   Latency: 0
+   Interrupt: pin A routed to IRQ19
+   Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=128]
+   Region 1: I/O ports at fe00 [size=128]
+   Capabilities: [40] Power Management version 2
+     Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
+     Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
+   Kernel driver in use: sis190
  
  $ dmesg | grep sis190
  [    1.400322] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
  [    1.400550] sis190: 0000:00:04.0: Read MAC address from EEPROM
  [    1.400553] sis190: 0000:00:04.0: Error EEPROM read 0lsblsb_
  [    1.400556] sis190: 0000:00:04.0: Read MAC address from APC
  [    1.476036] sis190: 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1
  [    1.988040] sis190: 0000:00:04.0: Usings transceiver at address 1 as default
  [    2.020319] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f840a000 (IRQ: 19), 00:1c:25:4d:d0:fc
  [    2.020323] sis190 0000:00:04.0 eth0: RGMII mode.
  [    2.400332] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
  [   34.208035] sis190 0000:00:04.0 eth0: mii ext = 0000
  [   34.232047] sis190 0000:00:04.0 eth0: mii lpa=45e1 adv=01e1 exp=0007
  [   34.232056] sis190 0000:00:04.0 eth0: link on 100 Mbps Full Duplex mode
  [  202.712030] sis190 0000:00:04.0 eth0: auto-negotiating...
  
- Also attached the
+ Let me know what other info I can provide...

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1357550

Title:
  [3.13.0-34] SiS Network card doesn't work after upgrading to ubuntu
  14.04

Status in “linux” package in Ubuntu:
  New

Bug description:
  After upgrading from 12.04 to 14.04, I have no internet anymore. It
  seems like a problem with the network card driver, but I'm not sure.
  This is some information.

  $ lsb_release -rd
  Description:	Ubuntu 14.04.1 LTS
  Release:	14.04

  $ uname -r
  3.13.0-34-generic

  $ sudo lspci -vnvn | grep Ethernet -A12
  00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02)
    Subsystem: Foxconn Internation, Inc. Device [105b:0c9e]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ19
    Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=128]
    Region 1: I/O ports at fe00 [size=128]
    Capabilities: [40] Power Management version 2
      Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: sis190

  $ dmesg | grep sis190
  [    1.400322] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
  [    1.400550] sis190: 0000:00:04.0: Read MAC address from EEPROM
  [    1.400553] sis190: 0000:00:04.0: Error EEPROM read 0lsblsb_
  [    1.400556] sis190: 0000:00:04.0: Read MAC address from APC
  [    1.476036] sis190: 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1
  [    1.988040] sis190: 0000:00:04.0: Usings transceiver at address 1 as default
  [    2.020319] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f840a000 (IRQ: 19), 00:1c:25:4d:d0:fc
  [    2.020323] sis190 0000:00:04.0 eth0: RGMII mode.
  [    2.400332] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
  [   34.208035] sis190 0000:00:04.0 eth0: mii ext = 0000
  [   34.232047] sis190 0000:00:04.0 eth0: mii lpa=45e1 adv=01e1 exp=0007
  [   34.232056] sis190 0000:00:04.0 eth0: link on 100 Mbps Full Duplex mode
  [  202.712030] sis190 0000:00:04.0 eth0: auto-negotiating...

  Let me know what other info I can provide...

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1357550/+subscriptions