launchpad-dev team mailing list archive
-
launchpad-dev team
-
Mailing list archive
-
Message #09783
Re: Problem with user "librarian"
On 29/09/15 15:37, Michael . wrote:
> I finished with Launchpad in VM (so I didn't inadvertently destroy a
> good working system) and I have sat down today and installed it on a
> production machine.
> There were a couple of hiccups along the way and each time I had a
> problem I worked through it till I got past that problem. I then
> reinstalled my system so it was totally new and up to date.
> The final time I got it running with no problems and the
> https://launchpad.dev page loads. I go to log in (I created a user
> michael and it had a generic email address given by utilities/make-lp-user .
> I went to sign in and on the sign in page (https://launchpad.dev/+login)
> and I I get "OpenID Provider Is Unavailable at This Time
> The openid provider was unavailable. Please try again in a moment." (I
> have a screenshot if you want one).
> I try a few more times but keep getting the same message (which I
> figured I would).
> What's going on here? What isn't installed or working properly?
> I'm happy to do a clean install again because I want to get this working
> on my machine before I go any further.
> Cheers.
> Michael
The development config uses https://testopenid.dev/ as its OpenID
provider, which is served by the same app that runs
https://launchpad.dev/. Have you tried rebooting to ensure all config
changes are in place? What do the Apache logs say about the
testopenid.dev request? Are you using Ubuntu 12.04 LTS or 14.04 LTS on
the server?
> On 26 September 2015 at 18:22, Michael . <keltoiboy@xxxxxxxxx
> <mailto:keltoiboy@xxxxxxxxx>> wrote:
>
> Ah ok, just checked and it works.
> I'll use the old Makefile now and see what happens with rabbitmq.
> Thanks for your help.
>
> On 26 September 2015 at 15:58, William Grant
> <william.grant@xxxxxxxxxxxxx <mailto:william.grant@xxxxxxxxxxxxx>>
> wrote:
>
> On 26/09/15 15:28, Michael . wrote:
> > Correction, it doesn't tell me that rabbitmq has timed out.
> This is the
> > output the mare run stops at.
> > 2015-09-26 05:15:51 INFO Killing librarian (3150)
> > 2015-09-26 05:15:51 INFO Killing launchpad (3148)
> > bin/run -r librarian,google-webservice,memcached,txlongpoll \
> > -i development
> > Removing stale pidfile /var/tmp/development-librarian.pid
> > ------
> > 2015-09-26T15:15:58 WARNING root Developer mode is enabled:
> this is a
> > security risk and should NOT be enabled on production servers.
> Developer
> > mode can be turned off in etc/zope.conf
> > ------
> > 2015-09-26T15:16:17 INFO Server zope.server.http (HTTP) started.
> > Hostname: michael-RV411-RV511-E3511-S3511-RV711
> > Port: 8085
> > URL: http://michael-RV411-RV511-E3511-S3511-RV711:8085/
> > ------
> > 2015-09-26T15:16:17 INFO PMDBWSGIHTTPServer zope.server.http
> > (PostmortemDebuggingHTTP) started.
> > Hostname: michael-RV411-RV511-E3511-S3511-RV711
> > Port: 8088
> > URL: http://michael-RV411-RV511-E3511-S3511-RV711:8088/
> > ------
> > 2015-09-26T15:16:17 INFO Server zope.server.http
> (DebugLayerHTTP) started.
> > Hostname: michael-RV411-RV511-E3511-S3511-RV711
> > Port: 8086
> > URL: http://michael-RV411-RV511-E3511-S3511-RV711:8086/
> > ------
> > 2015-09-26T15:16:17 INFO Server zope.server.http
> (PrivateXMLRPC) started.
> > Hostname: michael-RV411-RV511-E3511-S3511-RV711
> > Port: 8087
> > URL: http://michael-RV411-RV511-E3511-S3511-RV711:8087/
> > ------
> > 2015-09-26T15:16:17 INFO root Startup time: 18.689 sec real,
> 10.549 sec CPU
>
> That means Launchpad is up and running successfully. If you've used
> rocketfuel-setup, you should be able to browse to
> https://launchpad.dev/.
>
> But it took about twice as long to start as I would expect. I
> wouldn't
> try to run an appserver with less than 4GiB of RAM, though 2GiB
> might
> not be absolutely terrible if you're running 32-bit.
>
> > On 26 September 2015 at 15:26, Michael . <keltoiboy@xxxxxxxxx <mailto:keltoiboy@xxxxxxxxx>
> > <mailto:keltoiboy@xxxxxxxxx <mailto:keltoiboy@xxxxxxxxx>>> wrote:
> >
> > I have made a backup of the Makefile (Makefile.old) and removed all
> > references do rabbitmq in the original file. Nothing changes.
> > I'm starting to think some of this is a ram issue. How much ram is
> > the recommended minimum for launchpad to build and run?
> >
> > On 26 September 2015 at 10:34, William Grant
> > <william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>
> <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>>>
> > wrote:
> >
> > On 26/09/15 05:33, Michael . wrote:
> > > Sorry for the delay
> > > Clean install Ubuntu 14.04.3. Followed the process' at
> > > https://dev.launchpad.net/Running Everything went as
> it should until
> > > make run where I got
> > > <lp.scripts.runlaunchpad.TxLongPollService object at
> 0x2ab851b3fc50>
> > > fixture details:
> > > (not ready yet?)
> > > Traceback (most recent call last):
> > > File "bin/run", line 26, in <module>
> > > sys.exit(lp.scripts.runlaunchpad.start_launchpad())
> > > File
> > >
> "/home/michael/launchpad/lp-branches/devel/lib/lp/scripts/runlaunchpad.py",
> > > line 436, in start_launchpad
> > > with nested(*services):
> > > File "/usr/lib/python2.7/contextlib.py", line 17,
> in __enter__
> > > return self.gen.next()
> > > File "/usr/lib/python2.7/contextlib.py", line 112,
> in nested
> > > vars.append(enter())
> > > [... snip ...]
> > > Exception: Timeout waiting for RabbitMQ server to
> start: log in
> > > '/tmp/tmpJyCtsY/server.log'.
> > > make: *** [run] Error 1
> > >
> michael@michael-RV411-RV511-E3511-S3511-RV711:~/launchpad/lp-branches/devel$
> > >
> > >
> > > Checked logs and attached them to this
> > > message.tmpPpGdAq@xxxxxxxxxxxxxxxxxx is empty.
> > >
> > > So now rabbitmq is timing out and launchpad wont start.
> >
> > It works fine for me on a fresh trusty system. Does
> everything
> > work if
> > you edit Makefile to remove rabbitmq from the list of
> services
> > to start?
> > It's not essential for basic usage.
> >
> > > Cheers.
> > > Michael.
> > >
> > > On 24 September 2015 at 20:08, Michael .
> <keltoiboy@xxxxxxxxx <mailto:keltoiboy@xxxxxxxxx>
> <mailto:keltoiboy@xxxxxxxxx <mailto:keltoiboy@xxxxxxxxx>>
> > > <mailto:keltoiboy@xxxxxxxxx <mailto:keltoiboy@xxxxxxxxx>
> <mailto:keltoiboy@xxxxxxxxx <mailto:keltoiboy@xxxxxxxxx>>>> wrote:
> > >
> > > Ok I will work on it tomorrow when my mind is more alert.
> > > Thanks for your time and assistance, it is appreciated.
> > > Cheers.
> > > Michael.
> > >
> > > On 24 September 2015 at 19:46, William Grant
> > > <william.grant@xxxxxxxxxxxxx <mailto:william.grant@xxxxxxxxxxxxx>
> <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>>
> > <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>
> > <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>>>>
> > > wrote:
> > >
> > > On 24/09/15 19:32, Michael . wrote:
> > > > I am currently cleaning up my system. I
> will do a fresh install tomorrow
> > > > and post the results but as I said I have
> been able to get passed that
> > > > error and get stuck on a different error
> later on. The "librarian" and
> > > > now the rabbit time out is what I would
> like to work on as they are the
> > > > errors that are stopping me.
> > >
> > > The librarian error is fallout from the bad
> database setup. I've
> > > updated
> > > the manual instructions on the wiki (the
> problem you ran into was
> > > probably lack of IPv6 auth config), but you
> should work out why
> > > launchpad-database-setup is failing. It
> looks like the script is
> > > corrupt, or your /bin/sh is weird, or
> something similarly sinister.
> > >
> > > > On 24 September 2015 at 19:13, William Grant
> > > > <william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>
> <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>>
> > > <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>
> <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>>>
> > > <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>
> > <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>>
> > > <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>
> > <mailto:william.grant@xxxxxxxxxxxxx
> <mailto:william.grant@xxxxxxxxxxxxx>>>>> wrote:
> > > >
> > > > On 24/09/15 18:56, Michael . wrote:
> > > > > I have noticed that many things
> about LP see
> > to be aged
> > > but when that is
> > > > > what is available it is what people
> will use.
> > > > > Anyway, below is a copy of the
> output from a
> > new setup
> > > > >
> > >
> >
> michael@michael-RV411-RV511-E3511-S3511-RV711:~/launchpad/lp-branches/devel$
> > > > > ./utilities/launchpad-database-setup
> michael
> > > > > <snip>
> > > > > * Starting PostgreSQL 9.3 database
> > > > > server
> > > > > [ OK ]
> > > > > Waiting 10 seconds for postgresql to
> come up...
> > > > > Creating postgresql user $
> > > >
> > > > That's a bit suspicious; it should say
> "Creating
> > > postgresql user
> > > > michael". Can you paste the full output of
> > > launchpad-database-setup? Is
> > > > your /bin/sh a symlink to a shell
> other than
> > dash or bash?
> > > >
> > > > William.
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>
>
Attachment:
signature.asc
Description: OpenPGP digital signature
Follow ups
References
-
Problem with user "librarian"
From: Michael ., 2015-09-24
-
Re: Problem with user "librarian"
From: William Grant, 2015-09-24
-
Re: Problem with user "librarian"
From: Michael ., 2015-09-24
-
Re: Problem with user "librarian"
From: William Grant, 2015-09-24
-
Re: Problem with user "librarian"
From: Michael ., 2015-09-24
-
Re: Problem with user "librarian"
From: William Grant, 2015-09-24
-
Re: Problem with user "librarian"
From: Michael ., 2015-09-24
-
Re: Problem with user "librarian"
From: Michael ., 2015-09-25
-
Re: Problem with user "librarian"
From: William Grant, 2015-09-26
-
Re: Problem with user "librarian"
From: Michael ., 2015-09-26
-
Re: Problem with user "librarian"
From: Michael ., 2015-09-26
-
Re: Problem with user "librarian"
From: William Grant, 2015-09-26
-
Re: Problem with user "librarian"
From: Michael ., 2015-09-26
-
Re: Problem with user "librarian"
From: Michael ., 2015-09-29
