| Thread Previous • Date Previous • Date Next • Thread Next |
Hi Israel, Testing again, this time revision 229. Things appear much more stable now at the advanced OBI level. Selecting root and swap partitions works :-)Bug 1: Selecting 'no swap' does not work, the previously selected swap partition remains selected. (minor bug, but annoying for people who might want to install into pendrives, and want no swap). You might consider removing the menu entry 'select No_swap' because it does not work if swap was already selected.
But if there is no 'obiswap' partition, it is possible to skip selecting a swap partition, which I did in this test.
-o-After rebooting into the installed system, partitions in the target drive (connected via USB) were recognized. I no longer need to run sudo update grub :-)
Bug 2: But I got stuck with a '90 seconds delay' for some reason.I made a system without swap, but the old swap entry in /etc/fstab is still there, so I suspect that the system searched for a partition with that UUID, and finally gave up.
So this is a bug. It does not work properly to create a system without swap. In such cases the swap entry in /etc/fstab should be commented away (better than removing it because it provides a template for manual fixing afterwards).
Best regards Nio Den 2016-04-29 kl. 01:29, skrev Israel:
Hi Nio (inlines) On 04/28/2016 05:42 PM, Nio Wiklund wrote:Hi Israel, [replying inline] Best regards Nio Den 2016-04-28 kl. 22:26, skrev Israel:...I hope to gradually get used to these new(?) bash built-in commands.I think they are better to use in situations like ours where we are trying to make things fast on old computers.......It makes sense when you tell me these commands. But sometimes I'm losing all hope, when we are fighting bugs in code that used to work.Yes, but it worked for the terminal + dialog version And now (revision 229) I tested and things workAnyhow.... with that code gone *revision 228* should completely fix this issue. I will test it as well. I have been testing the basic installer mostly, so I will test advanced on this one only, since I modified only the advanced code. Let me know if it works for USB drives, as well.The OBI-istalleer is getting better :-) Now it was possible to get into gparted via the built-in sequence. I could add the labels obiroot and obiswap and continue with the installation. The installation worked, and the installed system works. But there are still bugs. 1. I cannot select root partition and swap partition manually (in the zenity menu). It looks like I select, but nothing is changed. The original selection remains. If root and/or swap are not selected by the partition labels, they are impossible to select. At least I don't know how to do it with the OBI-installer. It seems the mechanism to store or propagate the selection from the menu has failed somehow. This worked before you started to fix the problem of 'moving the desktop' with wmctrl.Yes, I found the problem!!! select-part2 HERE is my fix. It took me a while, because the code you had worked, but made no sense at first until I tested things quite a few ways until I discovered what you meant to do (at least I think) You were making sure that the 'X' in sdX is a letter ## check answer for something like sda ## s="${ans:0:1}" ## d="${ans:1:1}" ## a="${ans:2:1}" ## [[ "${ans:2:1}" == [a-zA-Z] ]] checks to make sure it is a letter if [[ "${ans:1:1}" == "d" ]] && [[ "${ans:2:1}" == [a-zA-Z] ]] then ###etc fi This is the code that was there if [ "${ans:1:1}" == "d" ] && [ "${ans:2:1}" '>' "_" ] && [ "${ans:2:1}" '<' "~" ] then ## etc fi Which made no sense to me.... I also replaced (uses 2 external programs twice) rootpart=$(grep obi-root "$partitions"|cut -d: -f2) swappart=$(grep obi-swap "$partitions"|cut -d: -f2) With while read LINE || [ "$LINE" ] do case $LINE in obi-root:*)rootpart="${LINE/*:}";; obi-swap:*)swappart="${LINE/*:}";; *);; esac done < "$partitions" which only uses read (1 program for both)I have tested with the target drive connected internally and externally. It makes no difference in this case. I would say that this is a show-stopper. I don't think we should abandon selection of partitions via the zenity menus. It is awkward to use gparted for the selection, when there is no [other] editing of partitions.Fully agree2. Already existing operating systems in internal drives (including eSATA), but not in USB drives, are recognized and added to the grub menu. This problem remains, but we can live with it. (It is no show-stopper.)I might try to get this working better... but for now if you try 229 and things work we can sigh a big sigh of relief This has been a fun experience learning what OBI does and converting it to use zenity.. quite a neat bit of work involved! But, I think we are getting closer to the finish line!! A few more days until May... hopefully we can get the last bits in place. As long as no show stoppers exist we can release and I can test on the unstable branch more.-- Regards
[starter] [functions] Tarball path: /tarballs zmktbl to make the tarballs OBI path: /usr/share/OBI [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 5080 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [confirm-partition] /dev/sda2 was not mounted [partition-help] RAM size:4096 MibiBytes [partition-help] SWAP size:4838 MibiBytes [partition-help] root: /dev/sda7 [partition-help] swap: /dev/sda2 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 6641 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda6 obi-swap:/dev/sda2 [confirm-partition] /dev/sda6 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] /dev/sda6 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 8124 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 obi-swap:/dev/sda1 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda1 was not mounted [select-part2] [select-part2] obi-root:/dev/sda5 obi-swap:/dev/sda1 [confirm-partition] /dev/sda5 was not mounted [confirm-partition] /dev/sda1 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 9549 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 10704 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 12172 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda1 obi-swap:/dev/sda2 [confirm-partition] /dev/sda1 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 13547 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 14729 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [partition-help] RAM size:4096 MibiBytes [partition-help] SWAP size:4838 MibiBytes [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 obi-swap:/dev/sda2 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 obi-swap:/dev/sda2 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 16573 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [select-part2] [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 18125 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [select-part2] [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 19573 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 obi-swap:/dev/sda2 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 21301 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 22644 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [select-part2] [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 obi-swap:/dev/sda2 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] /dev/sda2 was not mounted [confirm-partition] [confirm-partition] restart progress [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [functions] [functions] Found pid for Zenity in obi: 24390 [position_win] Found 0x01400004 for the window to position [mkctrl] mkctrl()--->obi_system=ToriOS-i386-jessie tarball= rootpart= swappart= [mkctrl] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [mkpxpy] Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz selecting mkpxpy (with swap) [confirm-partition] mkctrl()--->obi_system=ToriOS-i386-jessie tarball=/tarballs/ToriOS-i386-jessie.tar.xz rootpart= swappart= [confirm-partition] [mkctrl]Selected:/usr/share/OBI/selected OBI directory:/usr/share/OBI Tarball path:/tarballs [select-part2] [select-part2] [select-part2] [select-part2] obi-root:/dev/sda7 [confirm-partition] /dev/sda7 was not mounted [confirm-partition] Installing ToriOS-i386-jessie /dev/sda7 with no swap partition [confirm-partition] [confirm-partition]mklub ToriOS-i386-jessie /tarballs/ToriOS-i386-jessie.tar.xz /dev/sda7 [mkp] ToriOS-i386-jessie /tarballs/ToriOS-i386-jessie.tar.xz [mkp] Found pid for Zenity in mkp: 24390 [position_win] Found 0x01400004 for the window to position [mkp] return value was: 0 [mkp] /tarballs/ToriOS-i386-jessie.tar.xz (the tarball) is expanded, syncing the drive [mkp] 1 ext partitions: 09339ad0-25a7-4c0f-88fa-6592e0d95ccd [mkp] rootpart=/dev/sda7 [mkp] rootpart=/dev/sda7 OLD root UUID=09339ad0-25a7-4c0f-88fa-6592e0d95ccd NEW root UUID=50f1fdb2-3516-4e57-b54f-03b6713552d0 [mkp] installed /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # # / was on /dev/sdd1 during installation UUID=50f1fdb2-3516-4e57-b54f-03b6713552d0 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdd5 during installation UUID=a3562b8d-6d65-49ac-bc3b-28c073fc2a22 none swap sw 0 0 [mkp] [user-config] Removed tarball user named: torios [user-config] Removing /mnt/home/torios [user-config] Added test-no-swap [user-config] the password entries match, go ahead ... set password for test-no-swap test-no-swap Groups: audio,cdrom,plugdev,users,adm,video,dip,floppy,sudo,netdev [user-config] No autologin for: test-no-swap. [user-config] Updating: xdg-dirs [user-config] copied menumethod-lister [position_win] Found 0x01400004 for the window to position [user-config] removed menumethod-lister [user-config] copied /etc/skel [user-config] chown recursivley /home/test-no-swap for test-no-swap [user-config] changed gksu to sudo mode for test-no-swap [user-config] Computer supports PAE [user-config] copied install-pae to /mnt [position_win] Found 0x01400004 for the window to position [user-config] Yes install PAE chosen. [mkp] Installing Bootloader [functions] [list_drives] DRIVE: Name: ata-ST320LT007-9ZV142 Dev: /dev/sda Size: 320GB [list_drives] DRIVE: Name: usb-Kanguru_FlashBlu Dev: /dev/sdb Size: 8011MB [list_drives] DRIVE: Name: ata-ST320LT007-9ZV142 Dev: /dev/sda Size: 320GB [list_drives] DRIVE: Name: usb-Kanguru_FlashBlu Dev: /dev/sdb Size: 8011MB [list_drives] DRIVE: Name: ata-ST320LT007-9ZV142 Dev: /dev/sda Size: 320GB [list_drives] DRIVE: Name: usb-Kanguru_FlashBlu Dev: /dev/sdb Size: 8011MB [list_drives] DRIVE: Name: ata-ST320LT007-9ZV142 Dev: /dev/sda Size: 320GB [list_drives] DRIVE: Name: usb-Kanguru_FlashBlu Dev: /dev/sdb Size: 8011MB [functions] Destination: /dev/sda [functions] Bootloader destination: /dev/sda [functions] unmounted all filesystems [mkp] saved /root/obi-installer.log as /mnt/home/test-no-swap/obi-installer.log [mkp] removed HTML tags from /mnt/home/test-no-swap/obi-installer.log [mkp] Not rebooting. [mkp] Check the Result [functions] OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie OS to install: ToriOS-i386-jessie Menu Title: OS to install: ToriOS-i386-jessie [clearOBI] restart progress [clearOBI] kill -9 24390 [clearOBI] kill -9 24389 [clearOBI] kill -9 22640 [clearOBI] kill -9 23975 [clearOBI] kill -9 24386 <br /><b>[mkp]</b><br /> removed HTML tags from /root/obi-installer.log
| Thread Previous • Date Previous • Date Next • Thread Next |
