ac100 team mailing list archive
Mailing list archive
Marc Dietrich <marvin24@xxxxxx>
Charles-Michel Marle <cmm1934@xxxxxxxxx>
Fri, 11 Nov 2011 08:56:08 +0100
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:22.214.171.124) Gecko/20111004 Icedove/3.0.11
Le 10/11/2011 23:42, Marc Dietrich a écrit :
Thank you for your answer. This is the output of lsusb on my ac100-114:
charles@miniLyra:~$ sudo lsusb
[sudo] password for charles:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0424:2512 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp.
Bus 001 Device 003: ID 0db0:3822 Micro Star International
it seems that the usb bus fails to enumerate some devices for time to time.
This could be model dependent, e.g. my 10V sometimes has problems to see the
3G modem. I tried to fiddle a bit with the bus parameters but got no positive
Are you running from AC? If yes, can you please shutdown the device, remove
the AC and plug in the battery only (if it isn't already) and start again?
Does the lsusb output change?
Thank you for your interest in my problem!
Yes I was running from AC, but I just restarted the ac100 with the
battery only plugged,
and the output of lsusb is the same.