sony-vaio-z-series team mailing list archive
-
sony-vaio-z-series team
-
Mailing list archive
-
Message #02762
Re: Gfx-Card in PMD for VPC-Z2 finally working!
>
> Forgot to copy the list;
> Vick,
> Thanks for the response. Yes, I can modprobe qcserial without compiling a
> new module, however, none of the ttyUSB devices seem to work. By the way
> the ttyUSB0, ttyUSB1, ttyUSB2, and ttyUSB3, are created at boot without the
> qcserial module loaded. Also, it looks like
>
> usb_wwan 19863 1 option
> usbserial 42302 2 option,usb_wwan
>
> are loaded as well.
>
> dmesg output from modprobe qcserial
> [ 893.577556] usbcore: registered new interface driver qcserial
> [ 893.577574] USB Serial support registered for Qualcomm USB modem
>
> sony-laptop is also loaded. Not sure what you mean by "device is on via
> the rfkill interface".
>
> Here is the output of rfkill list
> sudo rfkill list
>
> 0: sony-wifi: Wireless LAN
> Soft blocked: no
> Hard blocked: no
> 1: sony-bluetooth: Bluetooth
> Soft blocked: no
> Hard blocked: no
> 2: sony-wwan: Wireless WAN
> Soft blocked: no
> Hard blocked: no
> 3: hci0: Bluetooth
> Soft blocked: no
> Hard blocked: no
> 4: phy0: Wireless LAN
> Soft blocked: no
> Hard blocked: no
>
> Rob
>
> On Fri, Aug 31, 2012 at 7:18 PM, vick <weasalandme@xxxxxxxxx> wrote:
>
>>
>> >________________________________
>> >
>> >I tried compiling the qcserial module but it pukes
>> >
>>
>>
>> There should be no need to compile qcserial, the device ID made it in the
>> kernel in 3.4. I actually had to blacklist it because network manager was
>> connecting via the serial device and I wanted to use the direct usb
>> interface for the gobi card. Just do sudo modprobe qcserial and see if
>> something shows in dmesg and if you get any ttyUSB devices. Also make sure
>> you have the sony-laptop module installed and the device is on via the
>> rfkill interface.
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~sony-vaio-z-series
>> Post to : sony-vaio-z-series@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~sony-vaio-z-series
>> More help : https://help.launchpad.net/ListHelp
>>
>
>
Follow ups
References
-
PMD Z2 new try
From: Gyhor, 2012-02-29
-
Re: PMD Z2 new try
From: Gyhor, 2012-02-29
-
Re: PMD Z2 new try
From: Henrik Olsson, 2012-02-29
-
Re: PMD Z2 new try
From: Gyhor, 2012-04-02
-
Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-17
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: 윤재연, 2012-08-18
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-20
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: 윤재연, 2012-08-20
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-20
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: 윤재연, 2012-08-20
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-21
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Rob Mukai, 2012-08-21
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-22
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Rob Mukai, 2012-08-30
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: vick, 2012-08-30
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: vick, 2012-09-01