← Back to team overview

sslug-teknik team mailing list archive

  1. sslug-teknik team
  2. Mailing list archive
  3. Message #97535

Re: klikkende harddisk

  Thread Previous • Date Previous • • Thread Next 
Lars Madsen wrote:

Lars Madsen wrote:


Men jeg tror ikke det er disken.
Måske defekt RAM, overclocking, defekt controller, defekt bundkort,........ 
du kan jo starte med en RAM test.



det tror jeg er en god ide.

memtest giver i hvertfald errors under sin undersøgelse.
Nu skal jeg bare lige have testen kørt helt igennem, og derefter have fundet den eller de RAM klodser den er gal med.
grrr, hardware er normalt noget man har folk til, men ok så lærer man jo også at debugge sådan noget.
hopla, doed RAM klods. De to sidste klarede fint memtest. Vil bestille en ny, Gad vide om de stadigvak er daekket af garentien? 

/daleif
Jeg lavede lige en smartctl -t long paa den klikkende harddisk, her er resultatet af -a, hvis der var nogen som var interesseret 

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.10 family
Device Model:     ST3500630A
Serial Number:    9QG9QLME
Firmware Version: 3.AAF
User Capacity:    500.107.862.016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Feb  9 23:53:10 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed 
					without error or no self-test has ever
					been run.
Total time to complete Offline
data collection: 		 ( 430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 163) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 097 006 Pre-fail Always - 142965480 3 Spin_Up_Time 0x0003 096 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 262 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 043 039 030 Pre-fail Always - 7872719137697 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 840 10 Spin_Retry_Count 0x0013 100 080 097 Pre-fail Always In_the_past 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 290 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 066 053 045 Old_age Always - 34 (Lifetime Min/Max 19/38) 194 Temperature_Celsius 0x0022 034 047 000 Old_age Always - 34 (0 14 0 0) 195 Hardware_ECC_Recovered 0x001a 064 060 000 Old_age Always - 171697002 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 

SMART Error Log Version: 1
ATA Error Count: 3
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 occurred at disk power-on lifetime: 303 hours (12 days + 15 hours)
When the command that caused the error occurred, the device was active or idle. 

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 01 00 00 a0  Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 01 00 00 a0 00      00:00:12.271  READ DMA
ef 03 45 01 10 00 a0 00 00:00:12.270 SET FEATURES [Set transfer mode] ef 03 0c 01 10 00 a0 00 00:00:12.236 SET FEATURES [Set transfer mode] 
  c6 da 10 01 4f c2 a0 00      00:00:05.023  SET MULTIPLE MODE
  b0 da 00 01 4f c2 a0 00      09:10:38.209  SMART RETURN STATUS

Error 2 occurred at disk power-on lifetime: 303 hours (12 days + 15 hours)
When the command that caused the error occurred, the device was active or idle. 

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 01 00 00 a0  Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 01 00 00 a0 00      00:00:12.286  READ DMA
ef 03 45 01 10 00 a0 00 00:00:12.286 SET FEATURES [Set transfer mode] ef 03 0c 01 10 00 a0 00 00:00:12.251 SET FEATURES [Set transfer mode] 
  c6 da 10 01 4f c2 a0 00      00:00:10.294  SET MULTIPLE MODE
  b0 da 00 01 4f c2 a0 00      09:10:38.209  SMART RETURN STATUS

Error 1 occurred at disk power-on lifetime: 303 hours (12 days + 15 hours)
When the command that caused the error occurred, the device was active or idle. 

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 01 00 00 a0  Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 01 00 00 a0 00      00:00:12.271  READ DMA
ef 03 45 01 10 00 a0 00 00:00:12.271 SET FEATURES [Set transfer mode] ef 03 0c 01 10 00 a0 00 00:00:12.236 SET FEATURES [Set transfer mode] 
  c6 da 10 01 4f c2 a0 00      00:00:10.399  SET MULTIPLE MODE
  b0 da 00 01 4f c2 a0 00      09:10:38.209  SMART RETURN STATUS

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 840 - 

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Follow ups

References

  Thread Previous • Date Previous • • Thread Next