torios-dev team mailing list archive

Thread
Date

Re: (Was Re: OBI update) New Testing ISO!

To: Israel <israeldahl@xxxxxxxxx>, torios- dev <torios-dev@xxxxxxxxxxxxxxxxxxx>, manostienen@xxxxxxxxx
From: Nio Wiklund <nio.wiklund@xxxxxxxxx>
Date: Sun, 21 Jan 2018 14:35:37 +0100
In-reply-to: <e378175b-d14b-1546-ce79-68d7356904a6@gmail.com>
User-agent: Mozilla/5.0 (X11; Linux i686; rv:52.0) Gecko/20100101 Thunderbird/52.5.0

Den 2018-01-20 kl. 22:43, skrev Israel:

Hi Nio,
Thanks for the detailed notes!!
(inlines below)

On 01/20/2018 02:45 PM, Nio Wiklund wrote:

Den 2018-01-20 kl. 18:43, skrev Israel:

..


Hi Israel,

I tested the new iso file with my Toshiba laptop from 2013, that I
have been using for development and testing for several years.

...

c. I could boot into recovery mode, but from there I could not start
the graphics. I think the problem is that there is no graphics driver
for my Toshiba :-(

can you give me the dmseg for that, as well as the install log!  Debian
is different than Ubuntu and does not automatically include all the
extra firmware... I could (perhaps) just install it all and avoid
this... but I have a script that *should* take care of this... perhaps
it did not, though..

...

I changed many things, so I cannot tell exactly what caused the failed
in the first case. Maybe the non-pae kernel, maybe something else, for
example check for updates or the default method (installing to the
whole drive). Or maybe there was some temporary glitch during my first
attempt.

This may be... OBI is pretty complicated, and while I understand most of
it, there are still parts of your code that are mysterious to me :)

I might be able to find out better later on, but I am sending this
feedback now.

Thanks for the quick response... it give me some major areas to work on
and test.

Best regards
Nio


Hi again Israel,

I tested a third time, this time similar to the first instance whichcame to a black screen with a blinking cursor.

And it worked. I thought that maybe it was a temporary glitch during thefirst test, maybe I did something that is hard to remember andreproduce. Anyway, this time it booted into a working desktop environment.

So I tried again, this time not selecting login without password, butarriving at the login screen in order to select user id and enter thepassword. And it failed like the first test instance. So it seems thatthe problem is with the login screen, the greeter or the log in manager.

There was neither anything in /var/log/dmesg during the installation norduring boot of the installed (failing) system. I hope the other attachedfiles are useful for you.


Best regards
Nio

Best regards
Nio

export SUDO_ASKPASS=/usr/bin/torios-askpass
export lxde-
export torios
export JWM
export /root/.config
export /usr/local/share:/usr/share
export /usr/share/upstart/xdg:/etc/xdg
export /root/.cache
export /root/.local/share/
gtkrc files as ~/.gtkrc-2.0

<html>
<br /><b>[starter]</b><br /> 3.3.0
<br /><b>[functions]</b><br /> 
Tarball path: /tarballs
zmktbl to make the tarballs
OBI path: /usr/share/OBI
<br /><b>[functions]</b><br /> 
OS to install: ToriOS-i386-jessie<br />Menu Title: OS to install: ToriOS-i386-jessie
<br /><b>[functions]</b><br /> starter chose: o
<br /><b>[setlevel]</b><br /> using: advanced
<br /><b>[functions]</b><br /> 
OS to install: ToriOS-i386-jessie<br />Menu Title: OS to install: ToriOS-i386-jessie
OS to install: ToriOS-i386-jessie<br />Menu Title: OS to install: ToriOS-i386-jessie
<br /><b>[functions]</b><br /> starter chose: a
<br /><b>[functions]</b><br /> 
<br /><b>[functions]</b><br /> Found pid for Zenity in obi: 3454
<br /><b>[position_win]</b><br /> Found 0x01600004 for the window to position
<br /><b>[mkctrl]</b><br /> mkctrl()--->obi_system=ToriOS-i386-jessie
tarball=
rootpart=
swappart=

<br /><b>[mkctrl]</b><br /> [mkctrl]Selected:/usr/share/OBI/selected
OBI directory:/usr/share/OBI
Tarball path:/tarballs
<br /><b>[mkpxpy]</b><br /> Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz
selecting mkpxpy (with swap)
<br /><b>[confirm-partition]</b><br /> mkctrl()--->obi_system=ToriOS-i386-jessie
tarball=/tarballs/ToriOS-i386-jessie.tar.xz
rootpart=
swappart=

<br /><b>[confirm-partition]</b><br /> [mkctrl]Selected:/usr/share/OBI/selected
OBI directory:/usr/share/OBI
Tarball path:/tarballs
<br /><b>[confirm-partition]</b><br /> 3.3.0
<br /><b>[partition-help]</b><br /> RAM  size:4096 MibiBytes
<br /><b>[partition-help]</b><br /> SWAP size:4838 MibiBytes
<br /><b>[partition-help]</b><br /> root: /dev/sda3
<br /><b>[partition-help]</b><br /> swap: /dev/sda2
<br /><b>[confirm-partition]</b><br /> /dev/sda3 was not mounted
<br /><b>[confirm-partition]</b><br /> /dev/sda2 was not mounted
<br /><b>[confirm-partition]</b><br /> g
<br /><b>[confirm-partition]</b><br /> Installing ToriOS-i386-jessie  /dev/sda3
with swap  /dev/sda2
<br /><b>[confirm-partition]</b><br /> [confirm-partition]mklub ToriOS-i386-jessie /tarballs/ToriOS-i386-jessie.tar.xz /dev/sda3 /dev/sda2
<br /><b>[mkp]</b><br /> ToriOS-i386-jessie
/tarballs/ToriOS-i386-jessie.tar.xz

<br /><b>[mkp]</b><br /> Found pid for Zenity in mkp: 3454
<br /><b>[position_win]</b><br /> Found 0x01600004 for the window to position
<br /><b>[mkp]</b><br /> /tarballs/ToriOS-i386-jessie.tar.xz (the tarball) is expanded, syncing the drive
<br /><b>[mkp]</b><br /> [mkpxpy] blkid for /dev/sda2 = /dev/sda2: LABEL="obiswap" UUID="10f00366-7d48-4bce-a5a2-cefc83b96deb" TYPE="swap" PARTUUID="f72e36ec-02" (if exists)
<br /><b>[mkp]</b><br /> Use existing swap partition /dev/sda2 - keep its UUID
<br /><b>[mkp]</b><br /> rootpart=/dev/sda3
<br /><b>[mkp]</b><br /> swappart=/dev/sda2
<br /><b>[mkp]</b><br /> NEW swap UUID=10f00366-7d48-4bce-a5a2-cefc83b96deb
<br /><b>[mkp]</b><br /> rootpart=/dev/sda3
NEW root UUID=2dd0cf08-16b9-4f32-8596-c1d92c14904e
<br /><b>[mkp]</b><br /> Made /mnt/etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda3 during installation
UUID=2dd0cf08-16b9-4f32-8596-c1d92c14904e /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda2 during installation
UUID=10f00366-7d48-4bce-a5a2-cefc83b96deb none            swap    sw              0       0
<br /><b>[mkp]</b><br /> grub config file: /mnt/boot/grub/grub.cfg<br /><pre></pre>
<br /><b>[mkhome]</b><br /> home partition is not specified
<br /><b>[mkp]</b><br /> Filename				Type		Size	Used	Priority
/dev/sda2                              	partition	4954516	0	3
<br /><b>[user-config]</b><br /> Removed old user named: torios
<br /><b>[user-config]</b><br /> Removing /mnt/home/torios
<br /><b>[user-config]</b><br /> Added tester
<br /><b>[user-config]</b><br /> the password entries match, go ahead ...<br /><br />set password for tester<br /><br />tester<br />Groups: audio,cdrom,plugdev,users,adm,video,dip,floppy,sudo,netdev
<br /><b>[user-config]</b><br /> Autologin for: tester.
<br /><b>[user-config]</b><br /> copied menumethod-lister
<br /><b>[position_win]</b><br /> Found 0x01600004 for the window to position
<br /><b>[user-config]</b><br /> removed menumethod-lister
<br /><b>[user-config]</b><br /> copied /etc/skel
<br /><b>[user-config]</b><br /> Computer supports PAE
<br /><b>[user-config]</b><br /> No install PAE chosen.
<br /><b>[mkp]</b><br /> Installing Bootloader
<br /><b>[mkp]</b><br /> 3.3.0
<br /><b>[mkp]</b><br />  saveLOG()--> /mnt/home/tester/mnt/home/tester/obi-installer-2018-01-21.log
<br /><b>[mkp]</b><br /> saved /root/obi-installer.log as /mnt/home/tester/obi-installer-2018-01-21.log
<br /><b>[mkp]</b><br /> removed HTML tags from /mnt/home/tester/obi-installer-2018-01-21.log
<br /><b>[functions]</b><br /> 
<br /><b>[hw-progress]</b><br /> rtl8723ae
<br /><b>[hw-progress]</b><br /> rtl8723ae
<br /><b>[hw-progress]</b><br /> rtl8723ae
<br /><b>[hw-progress]</b><br /> r8169
<br /><b>[hw-progress]</b><br /> r8169
<br /><b>[hw-progress]</b><br /> r8169
<br /><b>[hw-progress]</b><br />   hw-progress hardware-search rtl8723ae rtl8723ae rtl8723ae r8169 r8169 r8169
<br /><b>[hw-progress]</b><br /> mount -t proc proc /mnt/proc
<br /><b>[hw-progress]</b><br /> mount -t sysfs sys /mnt/sys
<br /><b>[hw-progress]</b><br /> mount -o bind /dev /mnt/dev
<br /><b>[hw-progress]</b><br /> cp /etc/hosts
<br /><b>[hw-progress]</b><br /> cp /etc/resolv.conf
<br /><b>[hw-progress]</b><br /> chroot /mnt bash -c hardware-search rtl8723ae rtl8723ae rtl8723ae r8169 r8169 r8169
<br /><b>[hw-progress]</b><br /> remove directory /firmware/ from /mnt
<br /><b>[hw-progress]</b><br /> umount /mnt/{proc,sys,dev}
<br /><b>[hw-progress]</b><br /> 2018-01-21 Look for [Firmware Look for rtl8723ae: Look for rtl8723ae Look for rtl8723ae Look for r8169 Look for r8169 Look for r8169 Look for rtl8723ae Look for rtl8723ae Look for rtl8723ae Look for r8169 Look for r8169 Look for r8169
<br /><b>[functions]</b><br /> 
<br /><b>[list_drives]</b><br /> DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
<br /><b>[list_drives]</b><br /> DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
<br /><b>[functions]</b><br /> ltest0=rootfs
ltest1=/sdb
livedrive=/sdb
tmpstr=Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
usbonly=false
<br /><b>[functions]</b><br /> DON'T unmount: aufs for /tarballs/ToriOS-i386-jessie.tar.xz
<br /><b>[list_drives]</b><br /> DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
<br /><b>[list_drives]</b><br /> DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
<br /><b>[list_drives]</b><br /> DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
<br /><b>[list_drives]</b><br /> DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
<br /><b>[list_drives]</b><br /> DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
<br /><b>[list_drives]</b><br /> DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
<br /><b>[functions]</b><br /> Window sizing
 Text length:69
Guessed Width=828 (if this is too small it will default to 500)
<br /><b>[functions]</b><br /> list_device_dialog():1
<br /><b>[functions]</b><br />   [grub-installer] Bootloader destination: /dev/sda
<br /><b>[functions]</b><br />   [grub-installer] Copied live CD mtab to chroot
<br /><b>[functions]</b><br />   [grub-installer] unmounted all chroot bound filesystems
<br /><b>[functions]</b><br />   [grub-installer] Successfully unmounted chroot
</html>

(Nothing has been logged yet.)


[starter]
 3.3.0

[functions]
 
Tarball path: /tarballs
zmktbl to make the tarballs
OBI path: /usr/share/OBI

[functions]
 
OS to install: ToriOS-i386-jessie
Menu Title: OS to install: ToriOS-i386-jessie

[functions]
 starter chose: o

[setlevel]
 using: advanced

[functions]
 
OS to install: ToriOS-i386-jessie
Menu Title: OS to install: ToriOS-i386-jessie
OS to install: ToriOS-i386-jessie
Menu Title: OS to install: ToriOS-i386-jessie

[functions]
 starter chose: i

[functions]
 

[functions]
 Found pid for Zenity in obi: 6516

[position_win]
 Found 0x01600004 for the window to position

[mkctrl]
 mkctrl()--->obi_system=ToriOS-i386-jessie
tarball=
rootpart=
swappart=


[mkctrl]
 [mkctrl]Selected:/usr/share/OBI/selected
OBI directory:/usr/share/OBI
Tarball path:/tarballs

[mkpxpy]
 Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz
selecting mkpxpy (with swap)

[confirm-partition]
 mkctrl()--->obi_system=ToriOS-i386-jessie
tarball=/tarballs/ToriOS-i386-jessie.tar.xz
rootpart=
swappart=


[confirm-partition]
 [mkctrl]Selected:/usr/share/OBI/selected
OBI directory:/usr/share/OBI
Tarball path:/tarballs

[confirm-partition]
 3.3.0

[confirm-partition]
 /dev/sda2 was not mounted

[select-part2]
 3.3.0

[select-part2]
 select-part2 after dialog or zenity: ans=sda4

[select-part2]
 rootpart=/dev/sda4 swappart=/dev/sda2

[select-part2]
 obi-root:/dev/sda4
obi-swap:/dev/sda2

[confirm-partition]
 /dev/sda4 was not mounted

[confirm-partition]
 /dev/sda2 was not mounted

[confirm-partition]
 g

[confirm-partition]
 Installing ToriOS-i386-jessie  /dev/sda4
with swap  /dev/sda2

[confirm-partition]
 [confirm-partition]mklub ToriOS-i386-jessie /tarballs/ToriOS-i386-jessie.tar.xz /dev/sda4 /dev/sda2

[mkp]
 ToriOS-i386-jessie
/tarballs/ToriOS-i386-jessie.tar.xz


[mkp]
 Found pid for Zenity in mkp: 6516

[position_win]
 Found 0x01600004 for the window to position

[mkp]
 /tarballs/ToriOS-i386-jessie.tar.xz (the tarball) is expanded, syncing the drive

[mkp]
 [mkpxpy] blkid for /dev/sda2 = /dev/sda2: LABEL="obiswap" UUID="10f00366-7d48-4bce-a5a2-cefc83b96deb" TYPE="swap" PARTUUID="f72e36ec-02" (if exists)

[mkp]
 Use existing swap partition /dev/sda2 - keep its UUID

[mkp]
 rootpart=/dev/sda4

[mkp]
 swappart=/dev/sda2

[mkp]
 NEW swap UUID=10f00366-7d48-4bce-a5a2-cefc83b96deb

[mkp]
 rootpart=/dev/sda4
NEW root UUID=5c084f7a-b4b5-4522-8b7b-8e2422ed7744

[mkp]
 Made /mnt/etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
#                
# / was on /dev/sda4 during installation
UUID=5c084f7a-b4b5-4522-8b7b-8e2422ed7744 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda2 during installation
UUID=10f00366-7d48-4bce-a5a2-cefc83b96deb none            swap    sw              0       0

[mkp]
 grub config file: /mnt/boot/grub/grub.cfg


[mkhome]
 home partition is not specified

[mkp]
 Filename				Type		Size	Used	Priority
/dev/sda2                              	partition	4954516	0	3

[user-config]
 Removed old user named: torios

[user-config]
 Removing /mnt/home/torios

[user-config]
 Added tester

[user-config]
 the password entries match, go ahead ...

set password for tester

tester
Groups: audio,cdrom,plugdev,users,adm,video,dip,floppy,sudo,netdev

[user-config]
 No autologin for: tester.

[user-config]
 copied menumethod-lister

[position_win]
 Found 0x01600004 for the window to position

[user-config]
 removed menumethod-lister

[user-config]
 copied /etc/skel

[user-config]
 Computer supports PAE

[user-config]
 No install PAE chosen.

[mkp]
 Installing Bootloader

[mkp]
 3.3.0

[mkp]
  saveLOG()--> /mnt/home/tester/mnt/home/tester/obi-installer-2018-01-21.log

<html>
<br /><b>[starter]</b><br /> 3.3.0
<br /><b>[functions]</b><br /> 
Tarball path: /tarballs
zmktbl to make the tarballs
OBI path: /usr/share/OBI
<br /><b>[functions]</b><br /> 
OS to install: ToriOS-i386-jessie<br />Menu Title: OS to install: ToriOS-i386-jessie
<br /><b>[functions]</b><br /> starter chose: o
<br /><b>[setlevel]</b><br /> using: advanced
<br /><b>[functions]</b><br /> 
OS to install: ToriOS-i386-jessie<br />Menu Title: OS to install: ToriOS-i386-jessie
OS to install: ToriOS-i386-jessie<br />Menu Title: OS to install: ToriOS-i386-jessie
<br /><b>[functions]</b><br /> starter chose: i
<br /><b>[functions]</b><br /> 
<br /><b>[functions]</b><br /> Found pid for Zenity in obi: 6516
<br /><b>[position_win]</b><br /> Found 0x01600004 for the window to position
<br /><b>[mkctrl]</b><br /> mkctrl()--->obi_system=ToriOS-i386-jessie
tarball=
rootpart=
swappart=

<br /><b>[mkctrl]</b><br /> [mkctrl]Selected:/usr/share/OBI/selected
OBI directory:/usr/share/OBI
Tarball path:/tarballs
<br /><b>[mkpxpy]</b><br /> Selected Tarball: /tarballs/ToriOS-i386-jessie.tar.xz
selecting mkpxpy (with swap)
<br /><b>[confirm-partition]</b><br /> mkctrl()--->obi_system=ToriOS-i386-jessie
tarball=/tarballs/ToriOS-i386-jessie.tar.xz
rootpart=
swappart=

<br /><b>[confirm-partition]</b><br /> [mkctrl]Selected:/usr/share/OBI/selected
OBI directory:/usr/share/OBI
Tarball path:/tarballs
<br /><b>[confirm-partition]</b><br /> 3.3.0
<br /><b>[confirm-partition]</b><br /> /dev/sda2 was not mounted
<br /><b>[select-part2]</b><br /> 3.3.0
<br /><b>[select-part2]</b><br /> select-part2 after dialog or zenity: ans=sda4
<br /><b>[select-part2]</b><br /> rootpart=/dev/sda4 swappart=/dev/sda2
<br /><b>[select-part2]</b><br /> obi-root:/dev/sda4
obi-swap:/dev/sda2
<br /><b>[confirm-partition]</b><br /> /dev/sda4 was not mounted
<br /><b>[confirm-partition]</b><br /> /dev/sda2 was not mounted
<br /><b>[confirm-partition]</b><br /> g
<br /><b>[confirm-partition]</b><br /> Installing ToriOS-i386-jessie  /dev/sda4
with swap  /dev/sda2
<br /><b>[confirm-partition]</b><br /> [confirm-partition]mklub ToriOS-i386-jessie /tarballs/ToriOS-i386-jessie.tar.xz /dev/sda4 /dev/sda2
<br /><b>[mkp]</b><br /> ToriOS-i386-jessie
/tarballs/ToriOS-i386-jessie.tar.xz

<br /><b>[mkp]</b><br /> Found pid for Zenity in mkp: 6516
<br /><b>[position_win]</b><br /> Found 0x01600004 for the window to position
<br /><b>[mkp]</b><br /> /tarballs/ToriOS-i386-jessie.tar.xz (the tarball) is expanded, syncing the drive
<br /><b>[mkp]</b><br /> [mkpxpy] blkid for /dev/sda2 = /dev/sda2: LABEL="obiswap" UUID="10f00366-7d48-4bce-a5a2-cefc83b96deb" TYPE="swap" PARTUUID="f72e36ec-02" (if exists)
<br /><b>[mkp]</b><br /> Use existing swap partition /dev/sda2 - keep its UUID
<br /><b>[mkp]</b><br /> rootpart=/dev/sda4
<br /><b>[mkp]</b><br /> swappart=/dev/sda2
<br /><b>[mkp]</b><br /> NEW swap UUID=10f00366-7d48-4bce-a5a2-cefc83b96deb
<br /><b>[mkp]</b><br /> rootpart=/dev/sda4
NEW root UUID=5c084f7a-b4b5-4522-8b7b-8e2422ed7744
<br /><b>[mkp]</b><br /> Made /mnt/etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda4 during installation
UUID=5c084f7a-b4b5-4522-8b7b-8e2422ed7744 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda2 during installation
UUID=10f00366-7d48-4bce-a5a2-cefc83b96deb none            swap    sw              0       0
<br /><b>[mkp]</b><br /> grub config file: /mnt/boot/grub/grub.cfg<br /><pre></pre>
<br /><b>[mkhome]</b><br /> home partition is not specified
<br /><b>[mkp]</b><br /> Filename				Type		Size	Used	Priority
/dev/sda2                              	partition	4954516	0	3
<br /><b>[user-config]</b><br /> Removed old user named: torios
<br /><b>[user-config]</b><br /> Removing /mnt/home/torios
<br /><b>[user-config]</b><br /> Added tester
<br /><b>[user-config]</b><br /> the password entries match, go ahead ...<br /><br />set password for tester<br /><br />tester<br />Groups: audio,cdrom,plugdev,users,adm,video,dip,floppy,sudo,netdev
<br /><b>[user-config]</b><br /> No autologin for: tester.
<br /><b>[user-config]</b><br /> copied menumethod-lister
<br /><b>[position_win]</b><br /> Found 0x01600004 for the window to position
<br /><b>[user-config]</b><br /> removed menumethod-lister
<br /><b>[user-config]</b><br /> copied /etc/skel
<br /><b>[user-config]</b><br /> Computer supports PAE
<br /><b>[user-config]</b><br /> No install PAE chosen.
<br /><b>[mkp]</b><br /> Installing Bootloader
<br /><b>[mkp]</b><br /> 3.3.0
<br /><b>[mkp]</b><br />  saveLOG()--> /mnt/home/tester/mnt/home/tester/obi-installer-2018-01-21.log
<br /><b>[mkp]</b><br /> saved /root/obi-installer.log as /mnt/home/tester/obi-installer-2018-01-21.log
<br /><b>[mkp]</b><br /> removed HTML tags from /mnt/home/tester/obi-installer-2018-01-21.log
<br /><b>[functions]</b><br /> 
<br /><b>[hw-progress]</b><br /> rtl8723ae
<br /><b>[hw-progress]</b><br /> rtl8723ae
<br /><b>[hw-progress]</b><br /> rtl8723ae
<br /><b>[hw-progress]</b><br /> r8169
<br /><b>[hw-progress]</b><br /> r8169
<br /><b>[hw-progress]</b><br /> r8169
<br /><b>[hw-progress]</b><br />   hw-progress hardware-search rtl8723ae rtl8723ae rtl8723ae r8169 r8169 r8169
<br /><b>[hw-progress]</b><br /> mount -t proc proc /mnt/proc
<br /><b>[hw-progress]</b><br /> mount -t sysfs sys /mnt/sys
<br /><b>[hw-progress]</b><br /> mount -o bind /dev /mnt/dev
<br /><b>[hw-progress]</b><br /> cp /etc/hosts
<br /><b>[hw-progress]</b><br /> cp /etc/resolv.conf
<br /><b>[hw-progress]</b><br /> chroot /mnt bash -c hardware-search rtl8723ae rtl8723ae rtl8723ae r8169 r8169 r8169
<br /><b>[hw-progress]</b><br /> remove directory /firmware/ from /mnt
<br /><b>[hw-progress]</b><br /> umount /mnt/{proc,sys,dev}
<br /><b>[hw-progress]</b><br /> 2018-01-21 Look for [Firmware Look for rtl8723ae: Look for rtl8723ae Look for rtl8723ae Look for r8169 Look for r8169 Look for r8169 Look for rtl8723ae Look for rtl8723ae Look for rtl8723ae Look for r8169 Look for r8169 Look for r8169
<br /><b>[functions]</b><br /> 
<br /><b>[list_drives]</b><br /> DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
<br /><b>[list_drives]</b><br /> DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
<br /><b>[functions]</b><br /> ltest0=rootfs
ltest1=/sdb
livedrive=/sdb
tmpstr=Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
usbonly=false
<br /><b>[functions]</b><br /> DON'T unmount: aufs for /tarballs/ToriOS-i386-jessie.tar.xz
<br /><b>[list_drives]</b><br /> DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
<br /><b>[list_drives]</b><br /> DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
<br /><b>[list_drives]</b><br /> DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
<br /><b>[list_drives]</b><br /> DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
<br /><b>[list_drives]</b><br /> DRIVE: Name: ata-KINGSTON_SKC300S37A120G  Dev: /dev/sda  Size: 120GB
<br /><b>[list_drives]</b><br /> DRIVE: Name: usb-Kanguru_FlashBlu         Dev: /dev/sdb  Size: 8011MB
<br /><b>[functions]</b><br /> Window sizing
 Text length:69
Guessed Width=828 (if this is too small it will default to 500)
<br /><b>[functions]</b><br /> list_device_dialog():1
<br /><b>[functions]</b><br />   [grub-installer] Bootloader destination: /dev/sda
<br /><b>[functions]</b><br />   [grub-installer] Copied live CD mtab to chroot
<br /><b>[functions]</b><br />   [grub-installer] unmounted all chroot bound filesystems
<br /><b>[functions]</b><br />   [grub-installer] Successfully unmounted chroot

Follow ups

Re: (Was Re: OBI update) New Testing ISO!
From: Israel, 2018-01-21

References

OBI update
From: Israel, 2018-01-17
Re: OBI update
From: Nio Wiklund, 2018-01-18
(Was Re: OBI update) New Testing ISO!
From: Israel, 2018-01-20
Re: (Was Re: OBI update) New Testing ISO!
From: Nio Wiklund, 2018-01-20
Re: (Was Re: OBI update) New Testing ISO!
From: Israel, 2018-01-20