ubuntu-phone team mailing list archive
-
ubuntu-phone team
-
Mailing list archive
-
Message #12459
Re: bq Aquaris E4.5: GPS doesn't work
On 04/26/2015 10:20 AM, Ed Kapitein wrote:
On 04/26/15 06:20, Thomas Voß wrote:
sudo GLOG_v=1000 GLOG_logtostderr=1 ubuntu-location-serviced-cli
--bus system --test
Hi Thomas,
I will send you the logs off-list.
What happened is that the information provided by
ubuntu-location-serviced-cli
seems to be no longer refreshed.
I keep getting the same readings over and over again.
For example i get:
(type: gps, prn: 20, snr: 26, has_almanac_data: 0, has_ephimeris_data:
0, used_in_fix: 0, azimuth: 0 de
g, elevation: 0 deg)
Time and time again.
The snr value is there and never changes, and the azimuth and
elevation remain zero.
That seems odd.
Kind regards,
Ed
Hi Thomas,
After a while waiting for a fix, i checked dmesg ( see below ) and it
seems that the GPS is turned off for some reason.
Lock is set to never and gps is switched on and the "sensorstats" app is
running in the foreground.
Does this seem normal?
Kind regards,
Ed
[ 1983.421042] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no
rx data(200)
[ 2087.623130] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no
rx data(200)
[ 2094.421398] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no
rx data(200)
[ 2098.026744] [GPS] GPS_read: signaled by -ERESTARTSYS(-512)
[ 2098.026751] GPS_close: major 191 minor 0 (pid 18474)
[ 2098.028420] Flush type = 2 Rx Queue
[ 2098.056978] [WMT-CTRL][I]wmt_ctrl_gps_sync_set:ctrl GPS_SYNC(7)
[ 2098.056999] [WMT-FUNC][I]wmt_func_gps_pre_ctrl:ctrl GPS_SYNC_SET(1) ok
[ 2098.057436] [WMT-IC][I]mtk_wcn_soc_pin_ctrl:ret = (0)
[ 2098.057457] [WMT-FUNC][I]wmt_func_gps_pre_ctrl:set reg for GPS_SYNC
function okay by chip ic_pin_ctrl
[ 2098.057470] [WMT-FUNC][I]wmt_func_gps_pre_ctrl:ctrl combo chip gps
sync function succeed
[ 2098.057481] [WMT-FUNC][I]wmt_func_gps_pre_ctrl:host pin used for gps lna
[ 2098.057493] [WMT-CTRL][I]wmt_ctrl_gps_lna_set:ctrl GPS_LNA(7)
[ 2098.057512] [WMT-FUNC][I]wmt_func_gps_pre_ctrl:ctrl host gps lna
function succeed
[ 2098.058450] [WMT-CTRL][I]wmt_ctrl_bgw_desense_ctrl:wmt-ctrl:send
native cmd(0)
[ 2098.058468] [BGW] send_command_to_daemon: here we will send command
to native daemon
[ 2098.058478] [BGW] send_command_to_daemon: invalid native process pid
[ 2098.058496] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC
OFF]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 stp:0)
[ 2098.058579] [GPS] GPS_close: WMT turn off GPS OK!
References
-
bq Aquaris E4.5: GPS doesn't work
From: Heroldich Robin, 2015-04-22
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Sebastien Bacher, 2015-04-22
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Sam Bull, 2015-04-23
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Matthias Apitz, 2015-04-23
-
Re: bq Aquaris E4.5: GPS doesn't work
From: sturmflut, 2015-04-25
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Matthias Apitz, 2015-04-25
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Ed Kapitein, 2015-04-25
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Matthias Apitz, 2015-04-25
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Ed Kapitein, 2015-04-25
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Thomas Voß, 2015-04-26
-
Re: bq Aquaris E4.5: GPS doesn't work
From: Ed Kapitein, 2015-04-26