sony-vaio-z-series team mailing list archive
-
sony-vaio-z-series team
-
Mailing list archive
-
Message #02771
Re: Gfx-Card in PMD for VPC-Z2 finally working!
Vick,
My Mobile Broadband tab for the LaptopConnect config in NM has in the Basic
Section Number (*99#), Username (blank), Password (blank). In the Advanced
area, APN (with a change button), Network ID (which is blank), and Type
(which I have as Any), an Allow Roaming checkbox (checked) and PIN (blank)
One other thing. In the dropdown from the top bar, I have a greyed out
option for Mobile Broadband and below it, it says Not Registered. Does that
just mean it is not connected?
Finally, I just tried it in Winbloze and it connected right away, so the
hardware seems to be working any way. So if I just wait a bit it will try
to connect by itself?
Rob
On Sun, Sep 2, 2012 at 4:45 PM, vick <weasalandme@xxxxxxxxx> wrote:
> Sep 2 16:18:13 VaioZ21 NetworkManager[1204]: <warn> GSM connection
> failed: (32) Network timeout
> >
>
> That seems to be the problem, the card can't get on the gsm network, I
> would wait a bit (since the device itself should try and connect to the gsm
> network) and try again.
>
> >
> >It seems to do better once I changed the 3g options to "Any" but still
> not connecting. Also, I am on AT&T, but I never used NM before as it wasn't
> picking up the GobiSerial Devices. I had been using the "Laptop Connect"
> but I also tried the "Data Connect" which gave the isp.cingular as the APN.
> Neither seem to work. Do you use a username and password? I have been using
> WAP@CINGULARGPRS.COMand CINGULAR1. Also, do you have anything in Network
> ID?
> >
>
>
> I'm not using a user/password. I'm not sure where you have Network ID, I
> don't see any option like that.
>
> _______________________________________________
> Mailing list: https://launchpad.net/~sony-vaio-z-series
> Post to : sony-vaio-z-series@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~sony-vaio-z-series
> More help : https://help.launchpad.net/ListHelp
>
Follow ups
References
-
PMD Z2 new try
From: Gyhor, 2012-02-29
-
Re: PMD Z2 new try
From: Gyhor, 2012-02-29
-
Re: PMD Z2 new try
From: Henrik Olsson, 2012-02-29
-
Re: PMD Z2 new try
From: Gyhor, 2012-04-02
-
Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-17
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: 윤재연, 2012-08-18
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-20
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: 윤재연, 2012-08-20
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-20
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: 윤재연, 2012-08-20
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-21
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Rob Mukai, 2012-08-21
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Gyhor, 2012-08-22
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Rob Mukai, 2012-08-30
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: vick, 2012-08-30
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: vick, 2012-09-01
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Rob Mukai, 2012-09-01
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: vick, 2012-09-02
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Rob Mukai, 2012-09-02
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: vick, 2012-09-02
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: Rob Mukai, 2012-09-02
-
Re: Gfx-Card in PMD for VPC-Z2 finally working!
From: vick, 2012-09-02